Please wait a minute...
 首页  期刊介绍 期刊订阅 联系我们 横山亮次奖 百年刊庆
 
最新录用  |  预出版  |  当期目录  |  过刊浏览  |  阅读排行  |  下载排行  |  引用排行  |  横山亮次奖  |  百年刊庆
清华大学学报(自然科学版)  2021, Vol. 61 Issue (6): 626-635    DOI: 10.16511/j.cnki.qhdxxb.2020.25.041
  工程力学 本期目录 | 过刊浏览 | 高级检索 |
薄板塑性极限分析的C1自然单元法
周书涛1, 马斌捷1, 侯传涛1, 童军1, 巨亚堂1, 刘应华2
1. 北京强度环境研究所, 北京 100076;
2. 清华大学 航天航空学院, 工程力学系, 北京 100084
C1 natural element method for plastic limit analyses of thin plates
ZHOU Shutao1, MA Binjie1, HOU Chuantao1, TONG Jun1, JU Yatang1, LIU Yinghua2
1. Beijing Institute of Structure & Environment Engineering, Beijing 100076, China;
2. Department of Engineering Mechanics, School of Aerospace, Tsinghua University, Beijing 100084, China
全文: PDF(6414 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 采用C1自然单元法研究了不同工况下圆形、菱形、等边多边形薄板的极限承载力。根据薄板极限上限分析的迭代求解格式,构造出了满足平衡方程和边界条件的广义应力场,并由极限下限定理和得到的广义应力场,建立了求解薄板结构极限下限载荷乘子的迭代格式。提出的数值方法克服了极限下限定理中约束条件的强非线性,降低了下限分析的计算规模,具有易于程序实现的优点。该数值方法与极限上限分析方法相结合可以有效估算出薄板结构极限载荷的范围。数值算例表明,提出的求解薄板结构上、下限载荷的方法是有效的,具有较高的计算精度和较快的收敛性。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
周书涛
马斌捷
侯传涛
童军
巨亚堂
刘应华
关键词 极限分析上限定理下限定理C1自然单元法直接迭代算法    
Abstract:The C1 natural element method (C1 NEM) was used to study the limiting loads of circular, rhombic, and equilateral polygon thin plates subjected to various loading conditions. An iterative solution for the upper load limits of the thin plates made the generalized stress fields satisfy the equilibrium equations and the boundary conditions. Iterative solutions were also used to calculate the lower limits of the load multipliers of thin plates using the lower bound theorem to obtain the generalized stress fields. This numerical method overcomes the difficulties introduced by the strong nonlinearity of the constraint condition in the lower bound theorem and reduces the calculations for the lower bound analysis in an easily implemented algorithm. This numerical approach can also be incorporated into upper bound analyses to estimate the limiting loads of thin plates. Numerical examples show that this numerical method can accurately and quickly predict the upper and lower load limits of thin plates.
Key wordslimit analysis    upper bound theorem    lower bound theorem    C1 natural element method (C1 NEM)    direct iteration algorithm
收稿日期: 2020-05-25      出版日期: 2021-04-28
基金资助:中国博士后科学基金(2013M540934)
作者简介: 周书涛(1983-),男,高级工程师。E-mail:zhoushutao-1983@163.com
引用本文:   
周书涛, 马斌捷, 侯传涛, 童军, 巨亚堂, 刘应华. 薄板塑性极限分析的C1自然单元法[J]. 清华大学学报(自然科学版), 2021, 61(6): 626-635.
ZHOU Shutao, MA Binjie, HOU Chuantao, TONG Jun, JU Yatang, LIU Yinghua. C1 natural element method for plastic limit analyses of thin plates. Journal of Tsinghua University(Science and Technology), 2021, 61(6): 626-635.
链接本文:  
http://jst.tsinghuajournals.com/CN/10.16511/j.cnki.qhdxxb.2020.25.041  或          http://jst.tsinghuajournals.com/CN/Y2021/V61/I6/626
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
[1] 陈钢, 刘应华. 结构塑性极限与安定分析理论及工程方法[M]. 北京:科学出版社, 2006. CHEN G, LIU Y H. Numerical theories and engineering methods for structural limit and shakedown analyses[M]. Beijing:Science Press, 2006. (in Chinese)
[2] 徐秉业, 刘信声. 结构塑性极限分析[M]. 北京:中国建筑工业出版社, 1985. XU B Y, LIU X S. Plastic limit analysis of structures[M]. Beijing:China Architecture & Building Press, 1985. (in Chinese)
[3] YU M H, MA G W, LI J C. Structural plasticity:Limit, shakedown and dynamic plastic analyses of structures[M]. Berlin:Springer Press, 2009.
[4] HODGE P G. Limit analysis of rotationally symmetric plates and shells[M]. New Jersey:Prentice-Hall, 1963.
[5] SAVE M A, MASSONNET C C. Plastic analysis and design of plates, shells, and disks[M]. Amsterdam:Elsevier Science Ltd., 1972.
[6] LUBLINER J. Plasticity theory[M]. New York:Macmillan, 1990.
[7] FOX E N. Limit analysis for plates:The exact solution for a clamped square plate of isotropic homogeneous material obeying the square yield criteron and loaded by uniform pressure[J]. Philosophical Transactions of the Royal Society A:Mathematical, Physical and Engineering Sciences, 1974, 277(1265):121-155.
[8] HODGE P G Jr, BELYTSCHKO T. Numerical methods for the limit analysis of plates[J]. Journal of Applied Mechanics, 1968, 35(4):795-802.
[9] CAPSONI A, CORRADI L. Limit analysis of plates:A finite element formulation[J]. Structural Engineering and Mechanics, 1999, 8(4):325-341.
[10] TURCO E, CARACCIOLO P. Elasto-plastic analysis of Kirchhoff plates by high simplicity finite elements[J]. Computer Methods in Applied Mechanics and Engineering, 2000, 190(5-7):691-706.
[11] LE C V, GILBERT M, ASKES H. Limit analysis of plates using the EFG method and second-order cone programming[J]. International Journal for Numerical Methods in Engineering, 2009, 78(13):1532-1552.
[12] BLEYER J, DE BUHAN P. On the performance of non-conforming finite elements for the upper bound limit analysis of plates[J]. International Journal for Numerical Methods in Engineering, 2013, 94(3):308-330.
[13] CAPSONI A, DA SILVA M V. A finite element formulation of Mindlin plates for limit analysis[J]. International Journal for Numerical Methods in Biomedical Engineering, 2011, 27(1):143-156.
[14] BAGHANI M, FEREIDOONNEZHAD B. Limit analysis of FGM circular plates subjected to arbitrary rotational symmetric loads using von-Mises yield criterion[J]. Acta Mechanica, 2013, 224(8):1601-1608.
[15] MAKRODIMOPOULOS A. An upper bound limit analysis formulation for thin plates[J]. Engineering and Computational Mechanics, 2015, 168(4):133-143.
[16] NGUYEN-THOI T, PHUNG-VAN P, NGUYEN-THOI M H, et al. An upper-bound limit analysis of Mindlin plates using CS-DSG3 method and second-order cone programming[J]. Journal of Computational and Applied Mathematics, 2015, 281:32-48.
[17] 周书涛, 刘应华, 陈莘莘. 基于非协调矩形弯曲单元的薄板极限上限分析方法[J]. 清华大学学报(自然科学版), 2011, 51(12):1887-1893. ZHOU S T, LIU Y H, CHEN S S. Upper-bound limit analysis method of thin plates based on the nonconforming rectangular bending element[J]. Journal of Tsinghua University (Science and Technology), 2011, 51(12):1887-1893. (in Chinese)
[18] ZHOU S T, LIU Y H, CHEN S S. Upper bound limit analysis of plates utilizing the C1 natural element method[J]. Computational Mechanics, 2012, 50(5):543-561.
[19] 陈浩峰. 多组载荷下结构极限分析和参考应力确定的数值方法及工程应用[D]. 北京:清华大学, 1998. CHEN H F. Numerical methods for limit analysis and reference stress determination of structures under multi-loading systems and their engineering applications[D]. Beijing:Tsinghua University, 1998. (in Chinese)
[20] ZHOU S T, LI Y, LIU Y H, et al. A numerical estimate method for limit analysis of plane structures by adopting the natural element method[C]//The 22nd Conference on Structural Mechanics in Reactor Technology. California, USA, 2013:1279-1287.
[21] SUKUMAR N, MORAN B. C1 natural neighbour interpolant for partial differential equations[J]. Numerical Methods for Partial Differential Equations, 1999, 15(4):417-447.
[22] SUKUMAR N, MORAN B, BELYTSCHKO T. The natural element method in solid mechanics[J]. International Journal for Numerical Methods in Engineering, 1998, 43(5):839-887.
[23] 张丕辛. 极限分析的无搜索数学规划算法及其应用[D]. 北京:清华大学, 1989. ZHANG P X. No-search mathematical programming algorithm for limit analysis and its engineering applications[D]. Beijing:Tsinghua University, 1989. (in Chinese)
[24] MANSFIELD E H. Studies in collapse analysis of rigid-plastic plates with a square yield diagram[J]. Proceedings of the Royal Society A-Mathematical, and Physical and Engineering Sciences, 1957, 241(1226):311-338.
[1] 孙红梅, 赵菲, 张亚新. 开孔接管对卧式储罐承载能力的影响分析[J]. 清华大学学报(自然科学版), 2016, 56(1): 102-105.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 《清华大学学报(自然科学版)》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn