Abstract:Endurance is an important indicator of aircraft performance. Nuclear energy has extremely high energy densities and is expected to significantly improve the endurance of unmanned aerial vehicles. This paper takes a certain type of UAV in the world as a prototype. And through analysis and comparison of nuclear thermal propulsion core schemes, a core scheme suitable for the core module of the nuclear power system of the UAV is designed to replace the original power system engine, the core module combustion chamber of the engine. Then this paper analyses the feasibility of the core module of the engine to be equipped with nuclear power, and the improvement of the endurance of the UAV driven by nuclear power. The results show that the nuclear power reactor core weighs 1 504.75 kg, requires a 3% enrichment degree of UC 119 kg, and the fuel working temperature is lower than 2 500 K, which meets the reactor physics and thermal engineering requirements. The core lifetime is nearly 170 days, which can significantly improve the endurance of unmanned aerial vehicles.
朱炳聿, 丁青青. 核动力对无人航空飞行器续航能力提升研究[J]. 清华大学学报(自然科学版), 2021, 61(11): 1295-1300.
ZHU Bingyu, DING Qingqing. Nuclear power to improve the endurance of unmanned aerial vehicles. Journal of Tsinghua University(Science and Technology), 2021, 61(11): 1295-1300.
[1] 廖宏图. 核热推进技术综述[J]. 火箭推进, 2011, 37(4):1-11.LIAO H T. Overview of nuclear thermal propulsion technologies[J]. Journal of Rocket Propulsion, 2011, 37(4):1-11. (in Chinese) [2] 解家春, 赵守智. 核热推进堆芯方案的发展[J]. 原子能科学技术, 2012, 46(S2):889-895. XIE J C, ZHAO S Z. Development of reactor core for nuclear thermal propulsion[J]. Atomic Energy Science and Technology, 2012, 46(S2):889-895. (in Chinese) [3] ROBBINS W H, FINGER H B. An historical perspective of the NERVA nuclear rocket engine technology program[C]//Proceedings of Conference on Advanced SEI Technologies. Los Angeles, USA:AIAA, 1991. [4] BRENGLE R G, HARTY R B, BHATTACHARYYA S. The promise and challenges of cermet fueled nuclear thermal propulsion reactors[C]//Proceedings of the 29th Joint Propulsion Conference and Exhibit. Monterey, USA:AIAA, 1993. [5] LUDEWIG H, POWELL J R, TODOSOW M, et al. Design of particle bed reactors for the space nuclear thermal propulsion program[J]. Progress in Nuclear Energy, 1996, 30(1):1-65. [6] POWELL J, PANIAGUA J, MAISE G, et al. High performance nuclear thermal propulsion system for near term exploration missions to 100 A.U. and beyond[J]. Acta Astronautica, 1999, 44(2-4):159-166. [7] GOUW R R. Nuclear design analysis of square-lattice honeycomb space rocket engine[D]. Florida:Florida University, 2000. [8] ZAKIROV V, PAVSHOOK V. Russian nuclear rocket engine design for Mars exploration[J]. Tsinghua Science & Technology, 2007, 12(3):256-260. [9] BULMAN M J, CULVER D W, MCLLWAIN M C, et al. US/CIS integrated NTRE[C]//Proceedings of the 29th Joint Propulsion Conference and Exhibit. Monterey, USA:AIAA, 1993. [10] CLARK J S, MCDANIEL P, HOWE S, et al. Nuclear thermal propulsion technology:Results of an interagency panel in FY 1991, NASA technical memorandum 105711[R]. Cleveland:NASA, 1991. [11] KAMMASH T. Fuel containment and stability in the gas core nuclear rocket (final report). April 15, 1993-April 14, 1994[R]. Michigan:University of Michigan, 1996. [12] WANG K, LI Z G, SHE D, et al. Progress on RMC-a Monte Carlo neutron transport code for reactor analysis[C]//Proceedings of the International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering (M & C'11). Brasilia, Brazil:ANS, 2011. [13] 姚远. 反应堆蒙卡分析中热工反馈效应初步研究[D]. 北京:华北电力大学, 2017. YAO Y. Initial research of thermal hydraulic feedback in the reactor Monte Carlo analysis[D]. Beijing:North China Electric Power University, 2017. (in Chinese) [14] 余健开, 李松阳, 王侃, 等. 反应堆用核截面处理程序RXSP的研发与验证[J]. 核动力工程, 2013, 34(S1):10-13. YU J K, LI S Y, WANG K, et al. Development and validation of nuclear cross section processing code for reactor analysis-RXSP[J]. Nuclear Power Engineering, 2013, 34(S1):10-13. (in Chinese)