Please wait a minute...
 首页  期刊介绍 期刊订阅 联系我们 横山亮次奖 百年刊庆
 
最新录用  |  预出版  |  当期目录  |  过刊浏览  |  阅读排行  |  下载排行  |  引用排行  |  横山亮次奖  |  百年刊庆
清华大学学报(自然科学版)  2021, Vol. 61 Issue (10): 1115-1123    DOI: 10.16511/j.cnki.qhdxxb.2021.22.007
  机械工程 本期目录 | 过刊浏览 | 高级检索 |
基于RTCP功能的五轴联动伺服匹配优化
陈彦羽1, 关立文1, 常佳豪1, 胡蓝2, 王林泉3
1. 清华大学 机械工程系, 北京 100084;
2. 上海航天设备制造总厂有限公司, 上海 200245;
3. 上海拓璞数控股份有限公司, 上海 201100
Optimization of servo matching for a five-axis machine tool based on the RTCP function
CHEN Yanyu1, GUAN Liwen1, CHANG Jiahao1, HU Lan2, WANG Linquan3
1. Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;
2. Shanghai Aerospace Equipment Manufacturing General Factory, Shanghai 200245, China;
3. Shanghai Topu CNC Technology Co., Ltd., Shanghai 201100, China
全文: PDF(4097 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 五轴联动机床的动态性能不仅取决于各单轴伺服进给系统动态特性,各轴之间的动态特性是否匹配也对其有着显著影响。该文针对具有刀具绕中心点旋转(RTCP)功能的AC型双摆头五轴联动铣床,提出了一种通过圆度测试法进行多轴间伺服匹配以提高机床整体动态精度的优化方法。该方法在选取了合理的匹配对象后,可在有效降低用于搭建各单轴机电耦合系统成本的同时保证系统较高的整体动态精度。首先基于该装有AC双摆头的五轴联动铣床的整体结构进行机构运动学分析,基于机床整体结构对其各轴伺服进给系统进行机电耦合建模并在SIMULINK中搭建各轴模型;接着基于RTCP功能设计了一条多轴参与运动的特定轨迹,对各轴在该运动轨迹下的运动关系进行分析;通过合理选择匹配对象,基于圆度测试法对X、Y、Z三轴两两轴间进行伺服匹配;而后基于SIMULINK模型,对优化前后机床在特定轨迹下运动的整体动态性能进行仿真对比。结果表明:在该优化方法下,几乎不需要提高伺服进给系统搭建成本,系统就可达到较高的整体动态性能。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
陈彦羽
关立文
常佳豪
胡蓝
王林泉
关键词 五轴联动机床机电耦合伺服匹配    
Abstract:The performance of a five-axis machine tool not only depends on the dynamic characteristics of each single-axis servo feed system, but also how well the dynamic characteristics of each axis are matched. An optimization method is developed for A/C axes included precision five-axis machine tools with the rotation tool center point (RTCP) function using multi-axis servo matching based on roundness testing to improve the overall machine accuracy. This method uses matched single-axis servo feed systems to reduce the cost of building each single-axis electromechanical coupling system while ensuring the dynamic accuracy. A kinematics analysis of the machine tool structure is used to build an electromechanical coupling model for each axis servo feed system that is implemented in SIMULINK. Then, a specific trajectory is designed for the RTCP function to analyze the motion relationships for each axis for the trajectory. The method is evaluated by selecting matching single-axis servo feed systems for servo matching between three linear axes of X, Y, and Z based on the roundness test method. The SIMULINK model is then used to compare the dynamic performance of the machine tool before and after optimization for the specific trajectory. The results show that this optimization method improves the machine dynamics with little cost for each single-axis servo feed system.
Key wordsfive-axis machine tool    electromechanical coupling    servo matching
收稿日期: 2020-11-09      出版日期: 2021-08-26
基金资助:国家重大科技专项(2019ZX04025001)
通讯作者: 关立文,研究员,E-mail:guanlw@tsinghua.edu.cn     E-mail: guanlw@tsinghua.edu.cn
引用本文:   
陈彦羽, 关立文, 常佳豪, 胡蓝, 王林泉. 基于RTCP功能的五轴联动伺服匹配优化[J]. 清华大学学报(自然科学版), 2021, 61(10): 1115-1123.
CHEN Yanyu, GUAN Liwen, CHANG Jiahao, HU Lan, WANG Linquan. Optimization of servo matching for a five-axis machine tool based on the RTCP function. Journal of Tsinghua University(Science and Technology), 2021, 61(10): 1115-1123.
链接本文:  
http://jst.tsinghuajournals.com/CN/10.16511/j.cnki.qhdxxb.2021.22.007  或          http://jst.tsinghuajournals.com/CN/Y2021/V61/I10/1115
  
  
  
  
  
  
  
  
  
  
  
  
[1] 李杰, 谢福贵, 刘辛军, 等. 五轴数控机床空间定位精度改善方法研究现状[J]. 机械工程学报, 2017, 53(7):113-128. LI J, XIE F G, LIU X J, et al. Analysis on the research status of volumetric positioning accuracy improvement methods for five-axis NC machine tools[J]. Journal of Mechanical Engineering, 2017, 53(7):113-128. (in Chinese)
[2] 王伟, 陶文坚, 李晴朝. 五轴数控机床动态精度检验试件特性研究[J]. 机械工程学报, 2017, 53(1):101-109. WANG W, TAO W J, LI Q Z. Research on characteristic of test specimen for five-axis CNC machine tools[J]. Journal of Mechanical Engineering, 2017, 53(1):101-109. (in Chinese)
[3] 吕盾, 李润泽, 刘辉, 等. 数控机床高速高加速进给下的跟随误差控制策略[J]. 西安交通大学学报, 2018, 52(12):25-31. LYU D, LI R Z, LIU H, et al. A control strategy of tracking errors for numerical control machine tools at high speed and acceleration feeding[J]. Journal of Xi'an Jiaotong University, 2018, 52(12):25-31. (in Chinese)
[4] 徐少华, 曹文成. 数控机床伺服系统中伺服电机的应用[J]. 泰州职业技术学院学报, 2009, 9(3):48-50.XU S H, CAO W C. Application of the servo motor in the NC machine tool servo feed system[J]. Journal of Taizhou Polytechnical Institute, 2009, 9(3):48-50. (in Chinese)
[5] 吴南星, 余冬玲. 数控机床伺服进给系统综合模型的探讨[J]. 机床与液压, 2008, 36(8):66-68.WU N X, YU D L. Discussion on the synthesis model of servo feed system for NC machine tool[J]. Machine Tool & Hydraulics, 2008, 36(8):66-68. (in Chinese)
[6] 吕盾, 刘青, 刘沛, 等. 五轴机床加工零件轮廓误差预测方法[J]. 西安交通大学学报, 2020, 54(2):9-15. LYU D, LIU Q, LIU P, et al. Contour error prediction method of part for five-axis machining[J]. Journal of Xi'an Jiaotong University, 2020, 54(2):9-15. (in Chinese)
[7] CHEN Y Y, HUANG P Y, YEN J Y. Frequency-domain identification algorithms for servo systems with friction[J]. IEEE Transactions on Control Systems Technology, 2002, 10(5):654-665.
[8] PISLARU C, FREEMAN J M, FORD D G. Modal parameter identification for CNC machine tools using wavelet transform[J]. International Journal of Machine Tools and Manufacture, 2003, 43(10):987-993.
[9] FENG B, YANG J, REN J R, et al. Control parameters optimization for servo feed system using an improved genetic algorithm[C]//Proceeding of the 11th World Congress on Intelligent Control and Automation. Shenyang, 2014:4865-4870.
[10] LIN R K, YAO B, CHEN M H, et al. Application analysis of servo-control system based on PMAC with feed-forward control[C]//Fourth International Conference on Machine Vision (ICMV 2011):Computer Vision and Image Analysis; Pattern Recognition and Basic Technologies. Paris, France, 2012, 8350:835020.
[11] XIE D, ZHU J Q, WANG F. Fuzzy PID control to feed servo system of CNC machine tools[J]. Procedia Engineering, 2012, 29:2853-2858.
[12] 邓梦. 基于RTCP的五轴联动数控机床动态误差溯源方法研究[D]. 成都:电子科技大学, 2014. DENG M. Research on tracing the source of dynamic error for five-axis CNC machine tool based on RTCP[D]. Chengdu:University of Electronic Science and Technology of China, 2014. (in Chinese)
[13] XI Z Y, LU C H, ZHANG J C. Modeling of computer-controlled AC servo feed system[J]. Materials Science Forum, 2004, 471-472:216-220.
[14] NIE X J. Modeling and simulation for feed servo system in CNC machine tool[J]. Advanced Materials Research, 2012, 510:345-349.
[15] 闻邦椿. 机械设计手册:第6卷[M]. 5版. 北京:机械工业出版社, 2010. WEN B C. Mechanical design handbook:Vol. 6[M]. 5th ed. Beijing:Machinery Industry Press, 2010. (in Chinese)
[16] 张义红, 张立群. 西门子840D SL伺服插补轴圆度测试的参数优化与研究[J]. 中国科技纵横, 2017(19):75-76, 78. ZHANG Y H, ZHANG L Q. Parameter optimization and research on roundness test of Siemens 840D SL servo interpolation axis[J]. China Science & Technology Overview, 2017(19):75-76, 78. (in Chinese)
[1] 陈彦羽, 付萌, 关立文, 常佳豪, 刁磊, 胡蓝. 采用力矩电机直驱的数控机床进给系统伺服刚度优化[J]. 清华大学学报(自然科学版), 2021, 61(10): 1124-1131.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 《清华大学学报(自然科学版)》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn