Please wait a minute...
 首页  期刊介绍 期刊订阅 联系我们 横山亮次奖 百年刊庆
 
最新录用  |  预出版  |  当期目录  |  过刊浏览  |  阅读排行  |  下载排行  |  引用排行  |  横山亮次奖  |  百年刊庆
清华大学学报(自然科学版)  2022, Vol. 62 Issue (11): 1758-1763,1779    DOI: 10.16511/j.cnki.qhdxxb.2022.26.027
  论文 本期目录 | 过刊浏览 | 高级检索 |
FAST馈源支撑钢索及舱索连接锚具役后剩余承载力研究
李庆伟1,2, 李辉1,2, 姜鹏1,2, 姚蕊1,2, 潘高峰1,2
1. 中国科学院 国家天文台, 北京 100101;
2. 中国科学院 FAST重点实验室, 北京 100101
Residual bearing capacity of the steel cables and anchorages of the FAST feed support system
LI Qingwei1,2, LI Hui1,2, JIANG Peng1,2, YAO Rui1,2, PAN Gaofeng1,2
1. National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100101, China;
2. Key Laboratory of FAST, Chinese Academy of Sciences, Beijing 100101, China
全文: PDF(15286 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 500 m口径球面射电望远镜(five-hundred-meter aperture spherical radio telescope,FAST)的馈源支撑系统是一个跨度巨大的柔索牵引并联机构,馈源舱由6根并联的钢索悬挂于空中,并随着6根钢索的同步收放在反射面上方大范围内缓慢运动。为研究到达服役年限后FAST馈源支撑钢索及舱索连接锚具的剩余承载力,该文对达到5年设计使用年限后的FAST馈源支撑钢索及舱索连接锚具进行了破断拉伸强度、拉伸疲劳试验。结果表明:在运行5年后,馈源支撑钢索及舱索连接锚具仍有足够的剩余承载力继续服役。该研究为今后馈源支撑钢索在适当的监测手段辅助下增加服役时间提供了试验依据。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
李庆伟
李辉
姜鹏
姚蕊
潘高峰
关键词 FAST馈源支撑钢索破断拉伸试验拉伸疲劳试验剩余承载力    
Abstract:The flexible five-hundred-meter aperture spherical radio telescope (FAST) feed support system is a cable-driven parallel manipulator with large spans. The feed cabin is suspended by 6 parallel steel cables and moves slowly over a large range above the reflector through coordinated coiling and uncoiling of the 6 parallel steel cables. The residual bearing capacities of the steel cables and the anchorages that are reaching the design lifespan of 5 years were evaluated using failure tensile tests and tensile fatigue tests for cable and anchorage samples. The tests show that the steel cables and anchorages still have enough residual bearing capacity to continue service after 5 years. This research provides an experimental basis for increasing the service time of steel cables for such monitoring systems.
Key wordsFAST feed support system steel cables    breaking tensile test    tensile fatigue test    residual bearing capacity
收稿日期: 2021-12-31      出版日期: 2022-10-19
基金资助:国家自然科学基金面上项目(11973006,11973062);中国科学院西部青年学者(A类)项目
通讯作者: 李辉,副研究员,E-mail:lihui@nao.cas.cn      E-mail: lihui@nao.cas.cn
作者简介: 李庆伟(1980-),男,高级工程师。
引用本文:   
李庆伟, 李辉, 姜鹏, 姚蕊, 潘高峰. FAST馈源支撑钢索及舱索连接锚具役后剩余承载力研究[J]. 清华大学学报(自然科学版), 2022, 62(11): 1758-1763,1779.
LI Qingwei, LI Hui, JIANG Peng, YAO Rui, PAN Gaofeng. Residual bearing capacity of the steel cables and anchorages of the FAST feed support system. Journal of Tsinghua University(Science and Technology), 2022, 62(11): 1758-1763,1779.
链接本文:  
http://jst.tsinghuajournals.com/CN/10.16511/j.cnki.qhdxxb.2022.26.027  或          http://jst.tsinghuajournals.com/CN/Y2022/V62/I11/1758
  
  
  
  
  
  
  
  
  
  
  
  
[1] NAN R D, REN G X, ZHU W B, et al. Adaptive cable-mesh reflector for the FAST[J]. Acta Astronomica Sinica, 2003, 44:13-18.
[2] JIANG P, YUE Y L, GAN H Q, et al. Commissioning progress of the FAST[J]. Science China Physics, Mechanics & Astronomy, 2019, 62(5):959502.
[3] JIANG P, NAN R D, QIAN L, et al. System solutions study on the fatigue of the FAST cable-net structure caused by form-changing operation[J]. Research in Astronomy and Astrophysics, 2015, 15(10):1758-1772.
[4] JIANG P, LI Q W, NAN R D. Research on design of adaptive connecting mechanisms for the cable-net and panels of FAST[J]. Research in Astronomy and Astrophysics, 2017, 17(9):99.
[5] 李辉, 朱文白, 潘高峰. 500 m口径球面射电望远镜进舱缆线连接机构的设计及其静力学分析[J]. 机械工程学报, 2010, 46(7):7-15. LI H, ZHU W B, PAN G F. Design of linking mechanisms of cable into focus cabin of five-hundred-meters aperture spherical radio telescope and its static analysis[J]. Journal of Mechanical Engineering, 2010, 46(7):7-15. (in Chinese)
[6] 李辉, 朱文白, 潘高峰. 基于索力优化的FAST柔索牵引并联机构的静力学分析[J]. 工程力学, 2011, 28(4):185-193, 207. LI H, ZHU W B, PAN G F. Equilibrium analysis of FAST rope-drive parallel manipulator based on rope force optimization[J]. Engineering Mechanics, 2011, 28(4):185-193, 207. (in Chinese)
[7] 李辉, 朱文白, 潘高峰. FAST望远镜馈源支撑中的力学问题及其研究进展[J]. 力学进展, 2011, 41(2):133-154. LI H, ZHU W B, PAN G F. Mechanics in the feed support of FAST telescope and its research progress[J]. Advances in Mechanics, 2011, 41(2):133-154. (in Chinese)
[8] 李辉, 潘高峰. 驱动链高速轴断裂所致FAST索牵引并联机器人的冲击振动仿真分析[J]. 振动与冲击, 2017, 36(12):75-82. LI H, PAN G F. Simulation on high-speed-shaft-rupture-induced shock vibration of a cable-driven parallel robot of FAST[J]. Journal of Vibration and Shock, 2017, 36(12):75-82. (in Chinese)
[9] 姚蕊, 李庆伟, 孙京海, 等. FAST望远镜馈源舱精度分析研究[J]. 机械工程学报, 2017, 53(17):36-42. YAO R, LI Q W, SUN J H, et al. Accuracy analysis on focus cabin of FAST[J]. Journal of Mechanical Engineering, 2017, 53(17):36-42. (in Chinese)
[10] 黄亮, 朱文白, 唐晓强, 等. 大射电望远镜索牵引并联机构索力优化分析[J]. 天文研究与技术, 2010, 7(3):268-276. HUANG L, ZHU W B, TANG X Q, et al. Optimization of cable tensions of a cable-driven parallel manipulator for a large radio telescope[J]. Astronomical Research & Technology, 2010, 7(3):268-276. (in Chinese)
[11] ZHANG X Y, LI H, YAO R, et al. Free vibration model and experimental study of the FAST cable-driven parallel mechanism[J]. International Journal of Advancements in Computing Technology, 2012, 4(20):310-320.
[12] 李辉, 李庆伟. FAST馈源支撑塔结构优化设计[J]. 工程力学, 2017, 34(S1):273-281. LI H, LI Q W. Structural design and optimization of feed-support towers of FAST telescope[J]. Engineering Mechanics, 2017, 34(S1):273-281. (in Chinese)
[13] 国家质量监督检验检疫总局, 中国国家标准化管理委员会. 铸钢件超声检测第1部分:一般用途铸钢件:GB/T 7233.1-2009[S]. 北京:中国标准出版社, 2010. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. Steel castings-ultrasonic examination-Part 1:Steel castings for general purposes:GB/T 7233.1-2009[S]. Beijing:Standards Press of China, 2010. (in Chinese)
[14] 国家市场监督管理总局, 中国国家标准化管理委员会. 铸钢铸铁件磁粉检测:GB/T 9444-2019[S]. 北京:中国标准出版社, 2019. State Administration for Market Regulation, Standardization Administration of the People's Republic of China. Steel and iron castings-magnetic particle inspection:GB/T 9444-2019[S]. Beijing:Standards Press of China, 2019. (in Chinese)
[15] 国家质量监督检验检疫总局, 中国国家标准化管理委员会. 金属材料轴向等幅低循环疲劳试验方法:GB/T 15248-2008[S]. 北京:中国标准出版社, 2008. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. Test method for axial loading constant-amplitude low-cycle fatigue of metallic materials:GB/T 15248-2008[S]. Beijing:Standards Press of China, 2008. (in Chinese)
No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 《清华大学学报(自然科学版)》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn