Please wait a minute...
 首页  期刊介绍 期刊订阅 联系我们 横山亮次奖 百年刊庆
 
最新录用  |  预出版  |  当期目录  |  过刊浏览  |  阅读排行  |  下载排行  |  引用排行  |  横山亮次奖  |  百年刊庆
清华大学学报(自然科学版)  2022, Vol. 62 Issue (11): 1809-1815,1822    DOI: 10.16511/j.cnki.qhdxxb.2022.26.026
  论文 本期目录 | 过刊浏览 | 高级检索 |
FAST索网大天顶角工况下结构响应分析
张宁远1,2, 罗斌1,2, 沈宇洲1,2, 姜鹏3,4, 李辉3,4, 李庆伟3,4
1. 东南大学 混凝土及预应力混凝土结构教育部重点实验室, 南京 211189;
2. 东南大学 国家预应力工程技术研究中心, 南京 211189;
3. 中国科学院 国家天文台, 北京 100101;
4. 中国科学院 FAST重点实验室, 北京 100101
Structural response of the FAST cable-net at large zenith angles
ZHANG Ningyuan1,2, LUO Bin1,2, SHEN Yuzhou1,2, JIANG Peng3,4, LI Hui3,4, LI Qingwei3,4
1. Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University, Nanjing 211189, China;
2. National Prestress Engineering Research Center, Southeast University, Nanjing 211189, China;
3. National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100101, China;
4. Key Laboratory of FAST, Chinese Academy of Sciences, Beijing 100101, China
全文: PDF(11610 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 500 m口径球面射电望远镜(five-hundred-meter aperture spherical radio telescope,FAST)反射面支承于索网结构上,通过促动器控制下拉索实现反射面的主动变位。在大天顶角工况和换源过程中,索网强度和疲劳尚待进一步研究。该文根据监测数据修正索网分析模型,利用修正后的模型对大天顶角主动变位工况的结构响应进行分析;提出修正焦比和安全变位策略,以改善大天顶角工况下的结构超限情况;研究了大小天顶角转换的换源过程中结构响应变化规律。结果表明:大天顶角工况下总过渡区始终为最外圈150根下拉索,该范围不受温度影响;调整后的新焦比可明显减少面索超限工况数;安全变位策略可在保证面型精度的前提下,确保面索索力和应力幅不超限;大天顶角至大天顶角的换源工况为换源最不利工况。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
张宁远
罗斌
沈宇洲
姜鹏
李辉
李庆伟
关键词 FAST索网结构大天顶角安全变位换源过程有限元    
Abstract:The five-hundred-meter aperture spherical radio telescope (FAST) is supported by a cable-net structure with active shape changing of the reflecting surface realized by hydraulic actuators controlling the cables. The strength and fatigue life of the cable-net have not been verified for large zenith angles and large source changes. The cable-net analysis model was modified based on current monitoring data to analyze the structural response of the cable-net for shape-changing operations at large zenith angles. A modified focal ratio and shape-changing strategy were developed to reduce excess stresses and stress amplitude at large zenith angles. The structural response analysis were carried out during the source-changing process when changing the zenith angle. The results show that the total transition zone always involves the 150 cables in the outermost ring for large zenith angles, with this result not being affected by temperature. The use of modified focal ratios can significantly reduce the number of excess stress conditions. A safe shape-changing strategy ensures that the surface cable stresses and stress amplitudes remain within the stress limits while still maintaining the surface accuracy. Source changing from one large zenith to another large zenith angle is the most unfavorable condition.
Key wordsFAST    cable-net structure    large zenith angle    safe shape changing    source changing process    finite element
收稿日期: 2021-12-27      出版日期: 2022-10-19
基金资助:国家自然科学基金面上项目(11973006);国家自然科学基金资助项目(11673039)
通讯作者: 罗斌,教授,E-mail:seurobin@seu.edu.cn      E-mail: seurobin@seu.edu.cn
作者简介: 张宁远(1996-),男,博士研究生。
引用本文:   
张宁远, 罗斌, 沈宇洲, 姜鹏, 李辉, 李庆伟. FAST索网大天顶角工况下结构响应分析[J]. 清华大学学报(自然科学版), 2022, 62(11): 1809-1815,1822.
ZHANG Ningyuan, LUO Bin, SHEN Yuzhou, JIANG Peng, LI Hui, LI Qingwei. Structural response of the FAST cable-net at large zenith angles. Journal of Tsinghua University(Science and Technology), 2022, 62(11): 1809-1815,1822.
链接本文:  
http://jst.tsinghuajournals.com/CN/10.16511/j.cnki.qhdxxb.2022.26.026  或          http://jst.tsinghuajournals.com/CN/Y2022/V62/I11/1809
  
  
  
  
  
  
  
  
  
  
  
  
  
  
[1] QIU Y K. A novel design for giant radio telescopes with an active spherical main reflector[J]. Chinese Astronomy and Astrophysics, 1998, 22(3):361-368.
[2] NAN R D, REN G X, ZHU W B, et al. Adaptive cable-mesh reflector for the FAST[J]. Acta Astronomica Sinica, 2003, 44(2):13-18.
[3] NAN R D. Five-hundred-meter aperture spherical radio telescope (FAST)[J]. Science in China Series G:Physics, Mechanics & Astronomy, 2006, 49(2):129-148.
[4] NAN R D, LI D, JIN C J, et al. The five-hundred-meter aperture spherical radio telescope (FAST) project[J]. Inter-national Journal of Modern Physics D, 2011, 20(6):989-1024.
[5] FAN F, QIAN H L, SHEN S Z, et al. The cable-net structure for supporting the reflector of FAST[C]//Proceedings of IASS-APCS Symposium. Beijing, China:Commission for Spatial Structure of China Civil Engineering Society, 2006:136-137.
[6] PENG B, JIN C J, WANG Q M, et al. Preparatory study for constructing FAST, the world's largest single dish[J]. Proceedings of the IEEE, 2009, 97(8):1391-1402.
[7] 钱宏亮, 范峰, 沈世钊, 等. FAST反射面支承结构整体索网分析[J]. 哈尔滨工业大学学报, 2005, 37(6):750-752. QIAN H L, FAN F, SHEN S Z, et al. Analysis on cable-net structure supporting the reflector of FAST[J]. Journal of Harbin Institute of Technology, 2005, 37(6):750-752. (in Chinese)
[8] 钱宏亮, 范峰, 沈世钊, 等. FAST反射面支承结构整体索网方案研究[J]. 土木工程学报, 2005, 38(12):18-23. QIAN H L, FAN F, SHEN S Z, et al. The cable-net structure supporting the reflector of FAST[J]. China Civil Engineering Journal, 2005, 38(12):18-23. (in Chinese)
[9] JIANG P, YUE Y L, GAN H Q, et al. Commissioning progress of the FAST[J]. Science China Physics, Mechanics & Astronomy, 2019, 62(5):959502.
[10] 钱宏亮. FAST主动反射面支承结构理论与试验研究[D]. 哈尔滨:哈尔滨工业大学, 2007. QIAN H L. Theoretical and experimental research on supporting structure of FAST refelector[D]. Harbin:Harbin Institute of Technology, 2007. (in Chinese)
[11] JIANG P, WANG Q M, ZHAO Q. Optimization and analysis on cable net structure supporting the reflector of the large radio telescope FAST[J]. Applied Mechanics and Materials, 2011, 94-96:979-982.
[12] 刘钰, 高峰. FAST反射面支承索网结构的初始状态求解[J]. 机械工程学报, 2013, 49(6):66-73.LIU Y, GAO F. Study of the initial status of cable-net structure reflector for the FAST[J]. Journal of Mechanical Engineering, 2013, 49(6):66-73. (in Chinese)
[13] 罗斌, 郭正兴, 王凯, 等. 基于初始基准态的FAST反射面索网结构性能优化分析研究[J]. 土木工程学报, 2015, 48(12):12-22. LUO B, GUO Z X, WANG K, et al. Performance optimization analysis of FAST reflector supported cable-net based on initial baseline state[J]. China Civil Engineering Journal, 2015, 48(12):12-22. (in Chinese)
[14] 李明辉, 朱丽春. FAST瞬时抛物面变形策略优化分析[J]. 贵州大学学报(自然科学版), 2012, 29(6):24-28, 43. LI M H, ZHU L C. Optimization analysis of deformation strategy of FAST instantaneous parabolic[J]. Journal of Guizhou University (Natural Sciences), 2012, 29(6):24-28, 43. (in Chinese)
[15] 孔旭, 姜鹏, 王启明. FAST索网高应力幅变位疲劳问题的优化分析[J]. 工程力学, 2013, 30(S1):169-174. KONG X, JIANG P, WANG Q M. Investigation on fatigue life of FAST cable-net under high stress amplitude produced by long-time active[J]. Engineering Mechanics, 2013, 30(S1):169-174. (in Chinese)
[16] 范峰, 金晓飞, 钱宏亮. 长期主动变位下FAST索网支承结构疲劳寿命分析[J]. 建筑结构学报, 2010, 31(12):17-23. FAN F, JIN X F, QIAN H L. Fatigue analysis of FAST cable-net structure under long-term active shape-changing work[J]. Journal of Building Structures, 2010, 31(12):17-23. (in Chinese)
[17] 李庆伟, 姜鹏, 南仁东. FAST反射面面板单元初始间隙[J]. 机械工程学报, 2017, 53(17):4-9. LI Q W, JIANG P, NAN R D. Initial gap between panels of the reflector of FAST[J]. Journal of Mechanical Engineering, 2017, 53(17):4-9. (in Chinese)
[18] 李建玲, 彭勃, 李辉, 等. FAST反射面单元在索网变位中的碰撞分析[J]. 西安电子科技大学学报, 2019, 46(5):148-154. LI J L, PENG B, LI H, et al. Analysis of collisions of reflector elements of the FAST active reflector[J]. Journal of Xidian University, 2019, 46(5):148-154. (in Chinese)
[19] 姜鹏, 朱万旭, 刘飞, 等. FAST索网疲劳评估及高疲劳性能钢索研制[J]. 工程力学, 2015, 32(9):243-249. JIANG P, ZHU W X, LIU F, et al. Fatigue proformance evaluation of FAST cable-net structures and development of a new type of steel cable system with high fatigue resistance[J]. Engineering Mechanics, 2015, 32(9):243-249. (in Chinese)
[1] 王志强, 雷震宇. 基于瞬态接触特性的科隆蛋扣件轨道波磨形成机理[J]. 清华大学学报(自然科学版), 2023, 63(11): 1844-1855.
[2] 周伟, 李敏, 丘铭军, 张西龙, 柳江, 张洪波. 基于改进遗传算法的车身板件厚度优化[J]. 清华大学学报(自然科学版), 2022, 62(3): 523-532.
[3] 杨雅琴, 徐鹏, 吴细水. 基于Fast-MCD的自适应建模探索轨道不平顺劣化[J]. 清华大学学报(自然科学版), 2022, 62(3): 516-522.
[4] 张红卫, 桂良进, 范子杰. 焊接热源参数优化方法研究及验证[J]. 清华大学学报(自然科学版), 2022, 62(2): 367-373.
[5] 何启嘉, 王启明, 李佳璇, 王正佳, 王通. 基于优势竞争网络的转运机器人路径规划[J]. 清华大学学报(自然科学版), 2022, 62(11): 1751-1757.
[6] 李庆伟, 李辉, 姜鹏, 姚蕊, 潘高峰. FAST馈源支撑钢索及舱索连接锚具役后剩余承载力研究[J]. 清华大学学报(自然科学版), 2022, 62(11): 1758-1763,1779.
[7] 吴若飞, 雷政, 杨磊, 王勇, 黄琳, 唐佳佳, 沈明, 郭安平, 甘仁波, 施小安, 李辉, 姚蕊. FAST望远镜设备的维护与保养[J]. 清华大学学报(自然科学版), 2022, 62(11): 1741-1750.
[8] 赵雅聪, 王启明. FAST索牵引并联机器人的动力学建模与仿真[J]. 清华大学学报(自然科学版), 2022, 62(11): 1772-1779.
[9] 殷家宁, 姜鹏, 陈明, 姚蕊. FAST索驱动并联机器人与Stewart平台结合的动力学建模方法[J]. 清华大学学报(自然科学版), 2022, 62(11): 1764-1771.
[10] 张海燕, 胡宏亮, 王钰, 姜化京, 甘恒谦, 胡浩, 黄仕杰. FAST无线电干扰智能监测技术[J]. 清华大学学报(自然科学版), 2022, 62(11): 1780-1788.
[11] 雷政, 姜鹏, 王启明. FAST促动器故障预测与健康管理系统[J]. 清华大学学报(自然科学版), 2022, 62(11): 1796-1802.
[12] 张宁远, 罗斌, 沈宇洲, 姜鹏, 李辉, 李庆伟. FAST索网运行准实时评估系统研究与开发[J]. 清华大学学报(自然科学版), 2022, 62(11): 1816-1822.
[13] 李辉, 宋立强, 杨清阁, 李庆伟. FAST三角形反射面单元滑动故障与结构损伤的力学分析和改进方法[J]. 清华大学学报(自然科学版), 2022, 62(11): 1823-1832.
[14] 宋立强, 李辉, 杨磊, 杨清阁. FAST反射面单元质量评估算法及维护关键技术[J]. 清华大学学报(自然科学版), 2022, 62(11): 1833-1838.
[15] 李彦霖, 秦本科, 薄涵亮. 电容式棒位测量传感器的解析模型及验证[J]. 清华大学学报(自然科学版), 2022, 62(10): 1636-1644.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 《清华大学学报(自然科学版)》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn