Please wait a minute...
 首页  期刊介绍 期刊订阅 联系我们 横山亮次奖 百年刊庆
 
最新录用  |  预出版  |  当期目录  |  过刊浏览  |  阅读排行  |  下载排行  |  引用排行  |  横山亮次奖  |  百年刊庆
清华大学学报(自然科学版)  2022, Vol. 62 Issue (9): 1532-1538    DOI: 10.16511/j.cnki.qhdxxb.2022.22.045
  机械工程 本期目录 | 过刊浏览 | 高级检索 |
船用柴油机曲轴箱轴端密封试验研究与改进
曹恒超1, 徐乙人2, 孙楠楠1, 韩承敏1, 朱桂香1, 李永健2
1. 潍柴动力股份有限公司, 潍坊 261061;
2. 清华大学 摩擦学国家重点实验室, 北京 100084
Experimental investigation to improve marine diesel engine crankcase shaft seals
CAO Hengchao1, XU Yiren2, SUN Nannan1, HAN Chengmin1, ZHU Guixiang1, LI Yongjian2
1. Weichai Power Co., Ltd., Weifang 261061, China;
2. State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, China
全文: PDF(1427 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 为研究某大型船用柴油机曲轴箱的轴端密封漏油问题,建立了面向气液两相介质的密封试验装置。通过试验获得了不同转速条件下空气和滑油的泄漏速率,定量地研究了密封装置中的甩油环、迷宫齿槽及回油通道等结构的减漏作用。为适应曲轴箱轴端密封大轴径、大间隙的特点,提出了基于刷式密封的改进方案。利用刷式密封的多孔介质模型分析了安装密封刷环对泄漏和流场的影响,并在试验装置上验证了刷式密封的减漏效果。试验结果表明:增加刷式密封后空气泄漏速率降幅达76%,漏油速率降幅达79%。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
曹恒超
徐乙人
孙楠楠
韩承敏
朱桂香
李永健
关键词 柴油机曲轴箱迷宫密封刷式密封两相流    
Abstract:A sealing leakage test system for gas-liquid mixtures was developed to measure oil leakage from shaft seals on large marine diesel engine crankcases. The air and oil leakage rates were then measured for various rotational speeds and the leakage reducing function of the oil slinger, labyrinth grooves and oil return channels were studied quantitatively. A brush seal design was then developed that was appropriate for the large shaft diameters and large clearances in crankcase shaft seals. A porous media model of the brush seal was then used to analyze the influence of the brush seal on the leakage and the flow field. The effect of the brush seal on the leakage was also studied on the sealing leakage test system. The results show that the brush seal reduces the air leakage rate by 76% and the oil leakage rate by 79%.
Key wordsdiesel engine crankcase    labyrinth seal    brush seal    two-phase flow
收稿日期: 2022-04-12      出版日期: 2022-08-18
基金资助:李永健,副教授,E-mail:liyongjian@tsinghua.edu.cn
引用本文:   
曹恒超, 徐乙人, 孙楠楠, 韩承敏, 朱桂香, 李永健. 船用柴油机曲轴箱轴端密封试验研究与改进[J]. 清华大学学报(自然科学版), 2022, 62(9): 1532-1538.
CAO Hengchao, XU Yiren, SUN Nannan, HAN Chengmin, ZHU Guixiang, LI Yongjian. Experimental investigation to improve marine diesel engine crankcase shaft seals. Journal of Tsinghua University(Science and Technology), 2022, 62(9): 1532-1538.
链接本文:  
http://jst.tsinghuajournals.com/CN/10.16511/j.cnki.qhdxxb.2022.22.045  或          http://jst.tsinghuajournals.com/CN/Y2022/V62/I9/1532
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
[1] 张晗, 闫大海, 钱治强. 船用柴油机发展趋势分析[J]. 舰船科学技术, 2021, 43(17): 137-141. ZHANG H, YAN D H, QIAN Z Q. Development trend analysis of marine diesel engine[J]. Ship Science and Technology, 2021, 43(17): 137-141. (in Chinese)
[2] 丁淑富, 孙笋升, 冯细文. 我国船用大功率柴油机产业现状及发展趋势分析[J]. 柴油机, 2012, 34(5): 1-5. DING S F, SUN S S, FENG X W. Development prospect of the domestic large power marine diesel engine industry[J]. Diesel Engine, 2012, 34(5): 1-5. (in Chinese)
[3] 郭志强, 门日秀, 闫柯, 等. 涡轮增压器甩油环密封性能研究[J]. 西安交通大学学报, 2019, 53(10): 143-150. GUO Z Q, MEN R X, YAN K, et al. Sealing performance of turbocharger oil slinger[J]. Journal of Xi’an Jiaotong University, 2019, 53(10): 143-150. (in Chinese)
[4] YANG S P, TAN B S, DENG X F. Numerical and experimental investigation of the sealing effect of a specific labyrinth seal structure[J]. Mathematical Problems in Engineering, 2019: 9851314.
[5] 徐继林. 某型主机轴封泄漏故障实例[J]. 航海技术, 2018(6): 41-43. XU J L. Fault example for shaft seal leakage of main engine[J]. Marine Technology, 2018(6): 41-43. (in Chinese)
[6] 李军, 李志刚, 张元桥, 等. 刷式密封技术的研究进展[J]. 航空发动机, 2019, 45(2): 74-84. LI J, LI Z G, ZHANG Y Q, et al. Research progress of brush seal technology[J]. Aeroengine, 2019, 45(2): 74-84. (in Chinese)
[7] 唐小勇. 气液两相刷式密封的性能研究[D]. 北京: 北京化工大学, 2018. TANG X Y. Study on the perfomance of gas-liquid two-phase brush seal[D]. Beijing: Beijing University of Chemical Technology, 2018. (in Chinese)
[8] OUTIRBA B, HENDRICK P. Influence of lubrication oil on the performance of carbon fibre brush seals for aero-engines bearing chambers[C]// Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. Phoenix USA, 2019.
[9] INGISTOV S. Non-metallic brush seal in heavy duty GT units, GE-made frame No.7, model EA[C]// Proceedings of ASME Turbo Expo 2007: Power for Land, Sea, and Air. Montreal, Canada, 2007: 595-601.
[10] 黄首清, 索双富, 李永健, 等. 刷式密封流场和温度场的3维数值计算[J]. 清华大学学报(自然科学版), 2014, 54(6): 805-810. HUANG S Q, SUO S F, LI Y J, et al. Numerical predictions of the flow and temperature distributions in a three-dimensional brush seal model[J]. Journal of Tsinghua University (Science and Technology), 2014, 54(6): 805-810. (in Chinese)
[11] FERGUSON J G. Brushes as high performance gas turbine seals[C]// Proceedings of ASME 1988 International Gas Turbine and Aeroengine Congress and Exposition. Amsterdam, The Netherlands, 1988.
[12] MENENDEZ R P, XIA J. Recent developments in brush seals for large industrial gas turbines[C]// Proceedings of the 36th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Las Vegas, USA, 2000.
[13] GRESHAM T G, WEAVER B K, WOOD H G, et al. Characterization of brush seal permeability[C]// Proceedings of ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. Seoul, South Korea, 2016.
[14] HILDEBRANDT M, SCHWITZKE C, BAUER H J. Analysis of heat flux distribution during brush seal rubbing using CFD with porous media approach[J]. Energies, 2021, 14(7): 1888.
[15] DOGU Y. Investigation of brush seal flow characteristics using bulk porous medium approach[J]. Journal of Engineering for Gas Turbines and Power, 2005, 127(1): 136-144.
[1] 赵炬颖, 徐乙人, 祝天一, 祁志浩, 李永健. 自适应迷宫密封仿真及实验研究[J]. 清华大学学报(自然科学版), 2022, 62(3): 463-469.
[2] 李晓伟, 吴莘馨, 张作义, 赵加清, 雒晓卫. 高温气冷堆示范工程螺旋管式直流蒸汽发生器工程验证试验[J]. 清华大学学报(自然科学版), 2021, 61(4): 329-337.
[3] 黄文仕, 吴玉新, 冯乐乐, 张缦, 张扬. 高速圆射流中典型非球形颗粒的扩散特性[J]. 清华大学学报(自然科学版), 2020, 60(6): 485-492.
[4] 唐国力, 吴玉新, 顾君苹, 刘青, 吕俊复. 垂直上升光管中气液两相摩擦因子分析[J]. 清华大学学报(自然科学版), 2020, 60(6): 500-506.
[5] 何强, 李永健, 黄伟峰, 李德才, 胡洋, 王玉明. 基于MPI+OpenMP混合编程模式的大规模颗粒两相流LBM并行模拟[J]. 清华大学学报(自然科学版), 2019, 59(10): 847-853.
[6] 黄首清, 索双富, 李永健, 杨杰, 刘守文, 王玉明. 基于2维叉排管束模型的刷式密封介质流动计算[J]. 清华大学学报(自然科学版), 2016, 56(2): 160-166.
[7] 黄首清,索双富,李永健,顾新民,王玉明. 刷式密封流场和温度场的3维数值计算[J]. 清华大学学报(自然科学版), 2014, 54(6): 805-810.
[8] 闵琪, 段远源, 王晓东. 格子Boltzmann模型结合MPR方程模拟流体饱和气液密度[J]. 清华大学学报(自然科学版), 2014, 54(5): 619-623.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 《清华大学学报(自然科学版)》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn