Please wait a minute...
 首页  期刊介绍 期刊订阅 联系我们 横山亮次奖 百年刊庆
 
最新录用  |  预出版  |  当期目录  |  过刊浏览  |  阅读排行  |  下载排行  |  引用排行  |  横山亮次奖  |  百年刊庆
清华大学学报(自然科学版)  2018, Vol. 58 Issue (3): 292-297    DOI: 10.16511/j.cnki.qhdxxb.2018.21.006
  机械工程 本期目录 | 过刊浏览 | 高级检索 |
全位置焊接机器人逆运动学数值求解及轨迹规划方法
郭吉昌, 朱志明, 王鑫, 马国锐
清华大学 机械工程系, 先进成形制造教育部重点实验室, 北京 100084
Numerical solution of the inverse kinematics and trajectory planning for an all-position welding robot
GUO Jichang, ZHU Zhiming, WANG Xin, MA Guorui
Key Laboratory for Advanced Materials Processing Technology, Ministry of Education, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China
全文: PDF(1931 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 针对所设计的新型箱型钢结构现场全位置焊接机器人存在欠自由度和自由度耦合等问题,导出了一种基于实际焊接工艺需求的机器人逆运动学数值解法,解决了采用传统解析法求解机器人逆运动学问题时存在的困难。在数值解的基础上,进一步提出了一种基于递推算法的机器人运动轨迹规划和焊枪空间位姿调整方法,实现了机器人在焊接箱型钢结构直角转角过程中的焊枪空间位姿的平滑过渡和调整。该方法不仅实现了箱型钢全位置焊接的轨迹规划功能,有利于计算机自动求解,而且可有效适应不同型号尺寸的箱型钢结构。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
郭吉昌
朱志明
王鑫
马国锐
关键词 焊接机器人箱型钢结构逆运动学数值解法轨迹规划    
Abstract:Versatile welding robots designed for the field welding of box-type steel structures have the problems of low DOF (degree of freedom) and DOF coupling. A numerical solution method was developed for the inverse kinematics of the robot based on the layouts of actual welding processes to solve difficulties encountered in analytic methods. The numerical solution leads to a trajectory planning method based on the recursive algorithm to adjust the position and posture of the welding torch to realize smooth adjustments and transitions of the welding torch during welding of the right-angle turning point of the box-type steel structures. This approach provides trajectory planning for the all-position welding of box-type steel in an automatic algorithm that is applicable to different sizes of box-type steel structures.
Key wordswelding robot    box-type steel structure    inverse kinematics    numerical solution    trajectory planning
收稿日期: 2017-09-22      出版日期: 2018-03-15
ZTFLH:  TP242.3  
基金资助:国家自然科学基金面上项目(51775301)
通讯作者: 朱志明,E-mail:zzmdme@tsinghua.edu.cn     E-mail: zzmdme@tsinghua.edu.cn
作者简介: 郭吉昌(1987-),男,博士研究生。
引用本文:   
郭吉昌, 朱志明, 王鑫, 马国锐. 全位置焊接机器人逆运动学数值求解及轨迹规划方法[J]. 清华大学学报(自然科学版), 2018, 58(3): 292-297.
GUO Jichang, ZHU Zhiming, WANG Xin, MA Guorui. Numerical solution of the inverse kinematics and trajectory planning for an all-position welding robot. Journal of Tsinghua University(Science and Technology), 2018, 58(3): 292-297.
链接本文:  
http://jst.tsinghuajournals.com/CN/10.16511/j.cnki.qhdxxb.2018.21.006  或          http://jst.tsinghuajournals.com/CN/Y2018/V58/I3/292
  图1 新型箱型钢结构焊接机器人系统
  图2 机器人系统空间坐标系布局示意图
  图3 直线运动状态DGH 模型坐标系
  图4 机器人末端关节坐标系
  图5 基于递推算法的轨迹规划程序流程图
  图6 基于逆运动学数值解和递推算法的轨迹规划仿真
  图7 焊接机器人各关节参数变化曲线图(半周焊接)
[1] 朱志明, 郭吉昌, 马国锐, 等. 箱型钢结构环缝焊接的机器人运动学分析与轨迹规划[J]. 清华大学学报(自然科学版), 2017, 57(8):785-791. ZHU Z M, GUO J C, MA G R, et al. Kinematics analysis and trajectory planning for a welding robot for girth welding of box-type steel structures[J]. Journal of Tsinghua University (Science & Technology), 2017, 57(8):785-791. (in Chinese)
[2] DENAVIT J, HARTENBERG R S. A kinematic notation for lower-pair mechanisms based on matrices[J]. Transactions of the ASME Journal of Applied Mechanics, 1955, 22:215-221.
[3] RODD M G. Introduction to robotics:Mechanics and control:John J. Craig[J]. Automatica, 1987, 23(2):263-264.
[4] YOSHIKAWA K, TANAKA K. Welding robots for steel frame structures[J]. Computer-Aided Civil and Infrastructure Engineering, 1997, 12(1):43-56.
[5] NAGATA M, BABA N, TACHIKAWA H, et al. Steel frame welding robot systems and their application at the construction site[J]. Computer-Aided Civil and Infrastructure Engineering, 1997, 12(1):15-30.
[6] 清华大学, 中铁建设集团有限公司. 一种箱型钢结构轨道式全位置焊接机器人:CN201310201215.5. 2013-09-11. Tsinghua University, China Railway Construction Group Co., Ltd. Rail type all-position welding robot for box-type steel structures:CN201310201215.5. 2013-09-11. (in Chinese)
[7] 朱志明, 马国锐, 刘晗, 等. 箱型钢结构焊接机器人系统机构设计与研究[J]. 焊接, 2014(3):2-7. ZHU Z M, MA G R, LIU H, et al. The structure design of box-type steel structure welding robot[J]. Welding & Joining, 2014(3):2-7. (in Chinese)
[8] 朱志明, 马国锐, 郭吉昌, 等. 基于蒙特卡洛法的箱型钢结构焊接机器人工作空间分析[J]. 焊接, 2016(9):1-5. ZHU Z M, MA G R, GUO J C, et al. Analysis of box-type steel structure welding robot workspace based on Monte Carlo method[J]. Welding & Joining, 2016(9):1-5. (in Chinese)
[9] 蔡自兴, 谢斌. 机器人学[M]. 3版. 北京:清华大学出版社, 2015. CAI Z X, XIE B. Robotics[M]. 3th ed. Beijing, China:Tsinghua University Press, 2015. (in Chinese)
[10] PIEPER D L. The kinematics of manipulators under computer control[D]. Palo Alto, California:Stanford University, 1968.
[11] DUFFY J. Analysis of mechanisms and robot manipulators[M]. London, UK:Edward Arnold, 1980.
[12] 梶田秀司. 仿人机器人[M]. 管贻生, 译. 北京:清华大学出版社, 2007. KAJITA S. Humanoid robots[M]. GUAN Y S, Trans. Beijing, China:Tsinghua University Press, 2007. (in Chinese)
[13] 熊涛, 韦建军, 洪晓莉. 下肢康复机器人逆运动学数值解法[J]. 机械设计与制造, 2016(5):164-166, 170. XIONG T, WEI J J, HONG X L. Numerical method for solving the inverse kinematics of lower limb rehabilitation robot[J]. Machinery Design & Manufacture, 2016(5):164-166, 170. (in Chinese)
[1] 冯消冰, 潘际銮, 高力生, 田伟, 魏然, 潘百蛙, 陈永, 陈苏云. 爬行焊接机器人在球罐自动焊接中的应用[J]. 清华大学学报(自然科学版), 2021, 61(10): 1132-1143.
[2] 胡奎,张继文,董云飞,吴丹. 针对关节限位优化的7自由度机械臂逆运动学解法[J]. 清华大学学报(自然科学版), 2020, 60(12): 1007-1015.
[3] 朱志明, 郭吉昌, 马国锐, 刘博. 箱型钢结构环缝焊接的机器人运动学分析与轨迹规划[J]. 清华大学学报(自然科学版), 2017, 57(8): 785-791.
[4] 郭孟武, 钟宏志. 两种严格界面向目标误差估计方法的等价性[J]. 清华大学学报(自然科学版), 2017, 57(4): 362-368.
[5] 付骁鑫, 江永亨, 黄德先, 王京春, 黄开胜. 基于最优计算量分配的公路轨迹规划[J]. 清华大学学报(自然科学版), 2016, 56(3): 273-280.
[6] 邵君奕,张传清,陈雁,陈恳. 用于空间内曲面喷涂的冗余度机器人轨迹规划方法[J]. 清华大学学报(自然科学版), 2014, 54(6): 799-804.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 《清华大学学报(自然科学版)》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn