Please wait a minute...
 首页  期刊介绍 期刊订阅 联系我们
 
最新录用  |  预出版  |  当期目录  |  过刊浏览  |  阅读排行  |  下载排行  |  引用排行  |  百年期刊
Journal of Tsinghua University(Science and Technology)    2016, Vol. 56 Issue (12) : 1249-1254     DOI: 10.16511/j.cnki.qhdxxb.2016.25.034
HYDRAULIC ENGINEERING |
Mini-slump flow measurement tool based on self phase image processing
NIE Ding, AN Xuehui
State Key Laboratory of Hydroscience and Engineering, Tsinghua University, Beijing 100084, China
Download: PDF(2721 KB)  
Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks    
Abstract  The workability of self-compacting concrete (SCC) is mainly affected by the SCC formulated paste rheological parameters. The paste rheological parameters are obtained from relative mini-slump flow tests. A mini-slump flow measurement tool was developed based on image processing for use on smart phones. First, a predefined mark is placed on the surface of the test plate. Then, the paste spread is imaged over time with the positions of the mark in the images recorded by the smart phone camera found by image processing. Every image of the tests is analyzed to calculate the relative mini-slump flow. The mini-slump flow rate is then calculated with the rheological parameters. The tool was evaluated using a series of mini-slump flow tests. The results show that the mini-slump flow times calculated by the tool are accurate and are nearly the same as those given by the standard method. Thus, this tool is a convenient, effective tool for mini-slump flow tests to obtain the rheological parameters of the paste.
Keywords self-compacting concrete      paste      mini-slump flow test      image processing      smart phones     
ZTFLH:  TV523  
  TP391.4  
Issue Date: 15 December 2016
Service
E-mail this article
E-mail Alert
RSS
Articles by authors
NIE Ding
AN Xuehui
Cite this article:   
NIE Ding,AN Xuehui. Mini-slump flow measurement tool based on self phase image processing[J]. Journal of Tsinghua University(Science and Technology), 2016, 56(12): 1249-1254.
URL:  
http://jst.tsinghuajournals.com/EN/10.16511/j.cnki.qhdxxb.2016.25.034     OR     http://jst.tsinghuajournals.com/EN/Y2016/V56/I12/1249
  
  
  
  
  
  
[1] Wu Q, An X. Development of a mix design method for SCC based on the rheological characteristics of paste[J]. Constr Build Mater, 2014, 53:642-651.
url: http://dx.doi.org/10.1016/j.conbuildmat.2013.12.008
[2] Roussel N, Stefani C, Leroy R. From mini-cone test to abrams cone test:Measurement of cement-based materials yield stress using slump tests[J]. Cem Concr Res, 2005, 35(5):817-822.
[3] Chidiac S E, Maadani O, Razaqpur A G, et al. Controlling the quality of fresh concrete-A new approach[J]. Mag Concr Res, 2000, 52(5):353-363.
[4] 吴琼. 基于净浆流变性的自密实混凝土配合比设计方法研究[D]. 北京:清华大学, 2014.WU Qiong. The Development of Mix Design Method for Self-compacting Concrete Based on the Rheological Characteristics of Paste[D]. Beijing:Tsinghua University, 2014. (in Chinese)
[5] Tregger N, Ferrara L, Shah S P. Identifying viscosity of cement paste from mini-slump-flow test[J]. ACI Materials Journal, 2008, 105(6):558-566.
[6] 沈乔楠. 堆石混凝土施工管理中视觉信息的处理方法及应用研究[D]. 北京:清华大学, 2010. SHEN Qiaonan. Study on the Processing Method and Application of Visual Information in Rock-filled Concrete Construction Management[D]. Beijing:Tsinghua University, 2010. (in Chinese)
[7] 李书阳, 沈乔楠, 安雪晖, 等. 基于增强现实的混凝土坍落扩展度测量[J]. 清华大学学报(自然科学版), 2012, 52(6):809-813. LI Shuyang, SHEN Qiaonan, AN Xuehui, et al. Slump flow measurements based on augmented reality[J]. J Tsinghua Univ (Sci & Tech), 2012, 52(6):809-813. (in Chinese)
url: http://dx.doi.org/nghua Univ (Sci
[8] 丁金铸. 基于图像处理的运动目标检测跟踪系统的设计与实现[D]. 武汉:华中师范大学, 2007.DING Jinzhu. The Design and Implementation of Moving Object Detection and Tracking System Based on Image Processing[D]. Wuhan:Central China Normal University, 2007. (in Chinese)
[9] Niu Y. Discussion about perspective transform[J]. J Computer Aided Design & Computer Graphics, 2001, 13(6):549-551.
url: http://dx.doi.org/puter Aided Design
[10] 胡东红, 汪浩, 艾君, 等. 两种图像校正算法在实际应用中的比较[J]. 计算机工程与应用, 2009, 45(13):191-193.HU Donghong, WANG Hao, AI Jun, et al. Comparisons of two kinds of image rectification algorithms[J]. Computer Engineering and Applications, 2009, 45(13):191-193. (in Chinese)
[11] 中国工程建设标准化协会203-2006. 自密实混凝土应用技术规程[S]. 北京:中国计划出版社, 2006.CECS 203-2006. Technical Specifications for Self Compacting Concrete Application[S]. Beijing:China Planning Press, 2006.
[12] 李书阳. 基于视觉信息的自密实混凝土工作性能评价方法研究[D]. 北京:清华大学, 2013. LI Shuyang. Research on Workablilty Evaluation of Self-compacting Concrete Based on Visual Informaton[D]. Beijing:Tsinghua University, 2013. (in Chinese)"
[1] XIE Weiqiang, ZHANG Xiaoping, LIU Xiaoli, ZHOU Xiaoxiong, LIU Quansheng. Three-dimensional morphological characterization of sand particles based on a multiangle projection method[J]. Journal of Tsinghua University(Science and Technology), 2024, 64(2): 294-302.
[2] LÜ Miao, AN Xuehui, LI Pengfei, ZHANG Jingbin, BAI Hao. Review of smart production techniques for the entire self-compacting concrete production process[J]. Journal of Tsinghua University(Science and Technology), 2022, 62(8): 1270-1280.
[3] WANG Hui, MA Jiajun, ZHOU Hu, HE Shiqin, JIN Feng. Mechanical behavior of rock-filled concrete with uniaxial compression[J]. Journal of Tsinghua University(Science and Technology), 2022, 62(2): 339-346.
[4] ZHANG Tianyi, ZHU Zhiming, ZHU Chuanhui, SUN Bowen. Visual sensing image processing and feature information extraction for arc welding[J]. Journal of Tsinghua University(Science and Technology), 2022, 62(1): 156-162.
[5] CHENG Shijia, ZHU Zhiming, FU Pingpo. Arc shape variations and characteristic temperatures of pulsed TIG welding arcs based on observed arc images[J]. Journal of Tsinghua University(Science and Technology), 2021, 61(9): 994-1001.
[6] ZHU Zhiming, CHENG Shijia, YU Yingfei, FU Pingpo. Automatic recognition and control of welding arc morphology as a function of the welding current and the tungsten electrode height[J]. Journal of Tsinghua University(Science and Technology), 2020, 60(4): 285-291.
[7] SUN Bowen, ZHU Zhiming, GUO Jichang, ZHANG Tianyi. Detection algorithms and optimization of image processing for visual sensors using combined laser structured light[J]. Journal of Tsinghua University(Science and Technology), 2019, 59(6): 445-452.
[8] ZHANG Simin, WANG Guolei, YU Qiankun, HUA Xiaotong, SONG Libin, CHEN Ken. Image processing analyses of the factors influencing the angle of an atomizer spray cone[J]. Journal of Tsinghua University(Science and Technology), 2019, 59(2): 103-110.
[9] DING Zhongcong, AN Xuehui. Analysis of self-compacting concrete workability based on twin-shaft mixing images[J]. Journal of Tsinghua University(Science and Technology), 2018, 58(11): 979-985.
[10] SHI Lin, XU Ran, XU Qianghui, XU Ying, ZHENG Licai. Advanced characterization of three-dimensional pores in coking sand by micro-CT[J]. Journal of Tsinghua University(Science and Technology), 2016, 56(10): 1079-1084.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
Copyright © Journal of Tsinghua University(Science and Technology), All Rights Reserved.
Powered by Beijing Magtech Co. Ltd