Simulation and parameter design of laser survey in underground energy storage caverns

doi:10.16511/j.cnki.qhdxxb.2017.25.027

Abstract
Figures/Tables
References
Related Articles
Metrics

Download: PDF(2924 KB)
Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks

Abstract Laser survey parameters are difficult to select due to the effects of different factors on the laser measurements. The characteristics of laser survey parameters are used here to define a design criterion and a design model for the laser survey parameters. The storage cavern dimensions and application-dependent parameters were used on a laser survey simulation of an underground storage cavern based on the design model to identify the design parameters for an in-situ laser survey of an underground storage cavern. The results show that the laser survey simulation and parameter design are an efficient tool for studying the survey parameters to optimize the various tasks in the planning stage.

Keywords underground energy storage caverns laser survey design model simulation parameter design

ZTFLH:

TN249

Issue Date: 15 July 2017

	Service

	E-mail this article
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

LÜ Xiaoning, LIU Xiaoli, DUAN Yunling, TANG Zhili. Simulation and parameter design of laser survey in underground energy storage caverns[J]. Journal of Tsinghua University(Science and Technology),2017, 57(7): 713-719.

URL:

http://jst.tsinghuajournals.com/EN/10.16511/j.cnki.qhdxxb.2017.25.027 OR http://jst.tsinghuajournals.com/EN/Y2017/V57/I7/713

[1]	Soudarissanane S, Lindenbergh R, Menenti M, et al. Scanning geometry: Influencing factor on the quality of terrestrial laser scanning points [J]. ISPRS J Photogramm Remote Sens, 2011, 66(4): 389-399.
[2]	Kukko A, Hyyppa J. Small-footprint laser scanning simulator for system validation, error assessment, and algorithm development [J]. Photogrammetric Engineering & Remote Sensing, 2009, 75(9): 1177-1189. url: http://dx.doi.org/grammetric Engineering
[3]	Pesci A, Teza G, Bonali E. Terrestrial laser scanner resolution: Numerical simulations and experiments on spatial sampling optimization [J]. Remote Sensing, 2011, 3(1): 167-184.
[4]	Arguelles-Fraga R, Ordonez C, Garcia-Cortes S, et al. Measurement planning for circular cross-section tunnels using terrestrial laser scanning [J]. Automat Constr, 2013, 31(3): 1-9.
[5]	Roca-Pardinas J, Arguelles-Fraga R, de Asis Lopez F, et al. Analysis of the influence of range and angle of incidence of terrestrial laser scanning measurements on tunnel inspection [J]. Tunn Undergr Sp Tech, 2014, 43(7): 133-139.
[6]	Buckley S J, Howell J A, Enge H D, et al. Terrestrial laser scanning in geology: Data acquisition, processing and accuracy considerations [J]. Journal of the Geological Society, 2008, 165(3): 625-638.
[7]	Gikas V. Three-dimensional laser scanning for geometry documentation and construction management of highway tunnels during excavation [J]. Sensors, 2012, 12(8): 11249-11270.
[8]	Lichti D D, Jamtsho S. Angular resolution of terrestrial laser scanners [J]. The Photogrammetric Record, 2006, 21(114): 141-160.
[9]	MacEachren A M, Davidson J V. Sampling and isometric mapping of continuous geographic surfaces [J]. The American Cartographer, 1987, 14(4): 299-320.
[10]	Lichti D D. Error modelling, calibration and analysis of an AM-CW terrestrial laser scanner system [J]. ISPRS J Photogramm Remote Sens, 2007, 61(5): 307-324.
[11]	Delaloye D, Diederichs M S, Walton G, et al. Sensitivity testing of the newly developed elliptical fitting method for the measurement of convergence in tunnels and shafts [J]. Rock Mech Rock Eng, 2015, 48(2): 651-667.
[12]	Zhao J, Choa V, Broms B B. Construction and utilization of rock caverns in Singapore Part B: Development costs and utilization [J]. Tunn Undergr Sp Tech, 1996, 11(1): 73-79.
[13]	Lee C I, Song J J. Rock engineering in underground energy storage in Korea [J]. Tunn Undergr Sp Tech, 2003, 18(5): 467-483.
[14]	何世德. 三心拱弧与椭圆弧[J]. 河北煤炭, 1987(4): 15-18.HE Shide. Three-centered circular arch and elliptical arch [J]. Hebei Coal, 1987(4): 15-18. (in Chinese)
[15]	Trimble. Trimble TX5 scanner datasheet [EB/OL]. (2012-11-07). http://www.trimble.com. url: http://www.trimble.com.

[1]	WANG Bin, ZHANG Jiwen, WU Dan. Aerial assembly measurement and control analysis method based on robot modeling[J]. Journal of Tsinghua University(Science and Technology), 2024, 64(4): 724-737.
[2]	REN Jianqiang, NI Shunjiang. Crowd guidance and control technology for public places[J]. Journal of Tsinghua University(Science and Technology), 2024, 64(3): 471-477.
[3]	LI Yu, WANG Xiangqin, MIN Jingchun. Numerical simulation of fuel flow and heat transfer in a serpentine tube considering the fuel variable properties[J]. Journal of Tsinghua University(Science and Technology), 2024, 64(2): 337-345.
[4]	SHI Yunjiao, ZHAO Ningbo, ZHENG Hongtao. Impact of inlet distortion on the flow characteristics of a heavy-duty gas turbine cylinder pressure[J]. Journal of Tsinghua University(Science and Technology), 2024, 64(1): 90-98.
[5]	LIU Anbang, CHEN Xi, ZHAO Qianchuan, LI Borui. Optimization method for allocations of energy storage systems and tractions for metro systems[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(9): 1408-1414.
[6]	YAN Zefan, LIU Rongzheng, LIU Bing, SHAO Youlin, LIU Malin. Molecular dynamics simulation of sintering behavior of SiC nanocoated particles[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(8): 1297-1308.
[7]	LI Congjian, GAO Hang, LIU Yi. Fast reconstruction of a wind field based on numerical simulation and machine learning[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(6): 882-887.
[8]	ZHAO Li, HE Chang, SHU Yidan, CHEN Qinglin, ZHANG Bingjian. Monte Carlo simulation of propylene/propane adsorption thermodynamics on molecular sieves[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(5): 714-722.
[9]	ZHONG Maohua, HU Peng, CHEN Junfeng, CHENG Huihang, WU Le, WEI Xuan. Research for smoke control in a subway tunnel under the ceiling multi-point vertical smoke exhaust[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(5): 754-764.
[10]	WANG Zhexin, LIU Hui, CHENG Li, GAO Lilei, LV Zhenlei, JIANG Nianming, HE Zuoxiang, LIU Yaqiang. Design of dedicated collimator for whole-body bone scanning on single photon emission computed tomography based on Monte Carlo simulation[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(5): 811-817.
[11]	AN Jian, CHEN Yuxuan, SU Xingyu, ZHOU Hua, REN Zhuyin. Applications and prospects of machine learning in turbulent combustion and engines[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(4): 462-472.
[12]	ZHOU Mingshuo, DING Siyu, WANG Xingjian. Review of subgrid models of the equation of state in the large eddy simulation of transcritical and supercritical flows and combustion[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(4): 473-486.
[13]	SUN Jihao, LUO Shaowen, ZHAO Ningbo, YANG Huiling, ZHENG Hongtao. Comparison of NO_x numerical models for methane/air combustion simulations[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(4): 623-632.
[14]	SUN Yifan, ZHU Wei, WU Yuxin, QI Haiying. The applicability study of Gao-Yong turbulence model to boundary layer transitions[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(4): 642-648.
[15]	MO Yi, CHEN Fan, XU Xiaoyan, JIAO Zhe, WEI Gang, LIN Hongjun, XIAO Wei, WANG Fang, REN Zhuyin. Modeling and simulation of two-phase turbulent combustion in aeroengine combustors[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(4): 670-680.

Viewed

Full text

Abstract

Cited

Shared

Discussed