| POWER SYSTEMS |
|
|
|
|
|
Dynamic analysis and multi-objective parameter optimization in multi-receiver wireless power transfer systems |
| TAN Tian, CHEN Kainan, LIN Qiuqiong, JIANG Ye, ZHAO Zhengming |
| State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment, Department of Electrical Engineering, Tsinghua University, Beijing 100084, China |
|
|
|
|
Abstract Wireless power transfer (WPT) can improve power supply safety, reliability and flexibility. Multi-receiver WPT systems have many advantages as high power, contactless power supplies for electric vehicle charging, rail transit and other systems. However, dynamic analysis and optimization methods are not well developed for multi-receiver WPT systems. This paper presents a dynamic model for a typical multi-receiver WPT system to analyze the effects of the system parameters on the steady-state and dynamic responses. Then, a multi-objective parameter optimization method is developed for the system based on the dynamic model. Simulations and experiments show that the dynamic model and optimization method are accurate and effective.
|
| Keywords
contactless power supplies
multi-receiver wireless power transfer
dynamic model
dynamic performance
multi-objective optimization
|
|
Issue Date: 26 August 2021
|
|
|
[1] CHEN X, YU S, ZHANG Z. A receiver-controlled coupler for multiple output wireless power transfer applications[J]. IEEE Transactions on Circuits and Systems I:Regular Papers, 2019, 66(11):4542-4552.
[2] MOON J, HWANG H, JO B, et al. Design and implementation of a high-efficiency 6.78 MHz resonant wireless power transfer system with a 5 W fully integrated power receiver[J]. IET Power Electronics, 2017, 10(5):577-587.
[3] VAN THUAN N, KANG S H, CHOI J H, et al. Magnetic resonance wireless power transfer using three-coil system with single planar receiver for laptop applications[J]. IEEE Transactions on Consumer Electronics, 2015, 61(2):160-166.
[4] LEE S, JUNG G, SHIN S, et al. The optimal design of high-powered power supply modules for wireless power transferred train[C]//2012 Electrical Systems for Aircraft, Railway and Ship Propulsion. Bologna, Italy, 2012.
[5] CHENG Y, WANG G, GHOVANLOO M. Analytical modeling and optimization of small solenoid coils for millimeter-sized biomedical implants[J]. IEEE Transactions on Microwave Theory and Techniques, 2017, 65(3):1024-1035.
[6] AGARWAL K, JEGADEESAN R, GUO Y, et al. Wireless power transfer strategies for implantable bioelectronics[J]. IEEE Reviews in Biomedical Engineering, 2017, 10:136-161.
[7] FENG H, TAVAKOLI R, ONAR O C, et al. Advances in high-power wireless charging systems:Overview and design considerations[J]. IEEE Transactions on Transportation Electrification, 2020, 3(6):886-919.
[8] HUTCHINSON L, WATERSON B, ANVARI B, et al. Potential of wireless power transfer for dynamic charging of electric vehicles[J]. IET Intelligent Transport Systems, 2019, 13(1):3-12.
[9] PATIL D, MCDONOUGH M K, MILLER J M, et al. Wireless power transfer for vehicular applications:Overview and challenges[J]. IEEE Transactions on Transportation Electrification, 2018, 4(1):3-37.
[10] 麦瑞坤, 李勇, 何正友, 等. 无线电能传输技术及其在轨道交通中研究进展[J]. 西南交通大学学报, 2016, 51(3):446-461. MAI R K, LI Y, HE Z Y, et al. Wireless power transfer technology and its research progress in rail transportation[J]. Journal of Southwest Jiaotong University, 2016, 51(3):446-461. (in Chinese)
[11] 林云志, 赖一雄. 轨道交通无线供电技术的研究进展[J]. 科学技术与工程, 2020, 20(3):892-898. LIN Y Z, LAI Y X. Research progress of wireless power transmission technology for rail transit[J]. Science Technology and Engineering, 2020, 20(3):892-898. (in Chinese)
[12] AHN D, HONG S. Effect of coupling between multiple transmitters or multiple receivers on wireless power transfer[J]. IEEE Transactions on Industrial Electronics, 2013, 60(7):2602-2613.
[13] MI C C, BUJA G, CHOI S Y, et al. Modern advances in wireless power transfer systems for roadway powered electric vehicles[J]. IEEE Transactions on Industrial Electronics, 2016, 63(10):6533-6545.
[14] LEE S, LEE B, LEE J. A new design methodology for a 300-kW, low flux density, large air gap, online wireless power transfer system[J]. IEEE Transactions on Industry Applications, 2016, 52(5):4234-4242.
[15] KIM J H, LEE B, LEE J, et al. Development of 1-MW inductive power transfer system for a high-speed train[J]. IEEE Transactions on Industrial Electronics, 2015, 62(10):6242-6250.
[16] ZHANG Y, ZHAO Z, CHEN K. Frequency-splitting analysis of four-coil resonant wireless power transfer[J]. IEEE Transactions on Industry Applications, 2014, 50(4):2436-2445.
[17] SUN Y, LIAO Z, YE Z, et al. Determining the maximum power transfer points for MC-WPT systems with arbitrary number of coils[J]. IEEE Transactions on Power Electronics, 2018, 33(11):9734-9743.
[18] ZHANG Y, ZHAO Z, CHEN K. Frequency-splitting analysis of four-coil resonant wireless power transfer[J]. IEEE Transactions on Industry Applications, 2014, 50(4):2436-2445.
[19] LEE S B, KIM M, JANG I G. Determination of the optimal resonant condition for multi-receiver wireless power transfer systems considering the transfer efficiency and different rated powers with altered coupling effects[J/OL]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2020. DOI:10.1109/JESTPE.2020.2983824.
[20] FENG R, CZARKOWSKI D, DE LEON F, et al. Optimal design of resonant coupled multi-receiver wireless power transfer systems[C]//2017 IEEE International Conference on Industrial Technology (ICIT). Toronto, Canada, 2017.
[21] LIU F, YANG Y, DING Z, et al. A multifrequency superposition methodology to achieve high efficiency and targeted power distribution for a multiload MCR WPT system[J]. IEEE Transactions on Power Electronics, 2018, 33(10):9005-9016.
[22] HUANG Y, LIU C, XIAO Y, et al. Separate power allocation and control method based on multiple power channels for wireless power transfer[J]. IEEE Transactions on Power Electronics, 2020, 35(9):9046-9056.
[23] VORPERIAN V. Simplified analysis of PWM converters using model of PWM switch:Continuous conduction mode[J]. IEEE Transactions on Aerospace and Electronic Systems, 1990, 26(3):490-496.
[24] ZAHID Z U, DALALA Z M, ZHENG C, et al. Modeling and control of series-series compensated inductive power transfer system[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2015, 3(1):111-123.
[25] TAN T, CHEN K, LIN Q, et al. Impedance shaping control strategy for wireless power transfer system based on dynamic small-signal analysis[J]. IEEE Transactions on Circuits and Systems I:Regular Papers, 2021, 68(3):1354-1365.
[26] BOSSHARD R, KOLAR J W. Multi-objective optimization of 50 kW/85 kHz IPT system for public transport[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2016, 4(4):1370-1382.
[27] WILDRICK C M, LEE F C, CHO B H, et al. A method of defining the load impedance specification for a stable distributed power system[J]. IEEE Transactions on Power Electronics, 1995, 10(3):280-285. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
2021,
Vol. 61
