Please wait a minute...
 首页  期刊介绍 期刊订阅 联系我们
 
最新录用  |  预出版  |  当期目录  |  过刊浏览  |  阅读排行  |  下载排行  |  引用排行  |  百年期刊
Journal of Tsinghua University(Science and Technology)    2023, Vol. 63 Issue (10) : 1520-1528     DOI: 10.16511/j.cnki.qhdxxb.2023.22.032
PUBLIC SAFETY |
Combustion properties of glass fiber/phenolic resin at low ambient pressures
ZHANG Xiaoyu1, JIA Xuhong1,2, DAI Shangpei1, TANG Jing1, MA Junhao1
1. College of Civil Aviation Safety Engineering, Civil Aviation Flight University of China, Guanghan 618307, China;
2. Civil Aircraft Fire Science and Safety Engineering Key Laboratory of Sichuan Province, Civil Aviation Flight University of China, Guanghan 618307, China
Download: PDF(4265 KB)   HTML
Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks    
Abstract  [Objective] Accidental fires seriously threaten the safe operation of aircraft. Air transportation environments typically have low ambient pressures that can significantly influence the occurrence and spread of fire. The wallboards in civil aircraft are generally made of composite materials. The Federal Aviation Administration of the United States and the Civil Aviation Administration of China require that the fire resistance characteristics of these materials be experimentally verified. This study investigated a sandwich structure panel (panel A) and a laminated panel (panel B) of an Airbus aircraft to understand the influence of ambient pressure on aircraft fires and to enable the earliest possible detection, management, and prevention of aircraft fires at the low ambient pressures typically encountered in such situations. Panel A was composed of upper and lower resin base panels, with an aramid honeycomb core and adhesive middle layer, whereas panel B was a resin-based glass fiber-reinforced laminate. [Methods] The effects of ambient pressure on the thermal insulation, ignition time, mass loss, and smoke characteristics of the panels A and B were studied using self-built, low-pressure, oxygen-enriched combustors in Kangding, Sichuan Province (61 kPa) and Guanghan, Sichuan Province (96 kPa), respectively. The thermal insulation characteristics of the panels were studied by measuring the temperature on the back surface of the panel after heating the front surface for 60 s with a heating rod. The effect of pressure on the convective heat loss was studied using the ideal gas relation. The mass loss during the fire was recorded by an electronic balance, and the smoke generation was recorded in real time by a smoke analyzer. [Results] The temperature of the back surface of panel A was 692.3 ℃ at atmospheric pressure and 512.4 ℃ at low pressure with a decrease of about 26.0%. The temperature of the back surface of panel B at normal and low pressures was 810.5 ℃ and 820.9 ℃, respectively. Furthermore, the temperature variation as a function of time was almost the same under either pressure condition for panel B, indicating that changes in the ambient pressure in the range studied had almost no impact on the insulation of panel B. The heating rate of panel B was higher than that of panel A, demonstrating the superior thermal insulation performance of panel A. Regarding the effect of pressure on the convective heat loss, the measured ignition times were in good agreement with the analytical model. The ignition time for panel A was reduced from 24.16 s to 20.34 s, i.e., reduced by 16%. Pressure variations had less influence on the ignition time for panel B. Variations in the pressure affected the rate of combustion; the mass loss for panel A decreased from 8.7% to 4.9%, and the peak mass loss rate decreased from 68.7×10-3 g·s-1 to 22.8×10-3 g·s-1, whereas the mass loss for panel B decreased from 5.8% to 4.8% and the peak mass loss rate decreased from 35.0×10-3 g·s-1 to 12.5×10-3 g·s-1. The time of the maximum O2 consumption and the time of the CO and CO2 production peaks of either kind of panels were almost the same under different pressure environments, whereas the maximum O2 consumption and CO and CO2 production peaks in the low-pressure environment were higher than those at atmospheric pressure. [Conclusions] This preliminary study on the effect of pressure on the combustion characteristics of aircraft panels finds that pressure has a significant impact on the occurrence and spread of aircraft fires. This study can provide theoretical support for cabin fire prevention and fire rescue under different pressure environments.
Keywords low pressure      civil aircraft panel      glass fiber/phenolic resin      combustion characteristics     
Issue Date: 01 September 2023
Service
E-mail this article
E-mail Alert
RSS
Articles by authors
ZHANG Xiaoyu
JIA Xuhong
DAI Shangpei
TANG Jing
MA Junhao
Cite this article:   
ZHANG Xiaoyu,JIA Xuhong,DAI Shangpei, et al. Combustion properties of glass fiber/phenolic resin at low ambient pressures[J]. Journal of Tsinghua University(Science and Technology), 2023, 63(10): 1520-1528.
URL:  
http://jst.tsinghuajournals.com/EN/10.16511/j.cnki.qhdxxb.2023.22.032     OR     http://jst.tsinghuajournals.com/EN/Y2023/V63/I10/1520
  
  
  
  
  
  
  
  
  
  
[1] 杨雪梅.酚醛阻燃复合材料在民用飞机上的应用[J].工程与试验, 2015, 55(3):30-34, 103. YANG X M. Application of flame retardant phenolic composite to civil aircraft[J]. Engineering&Test, 2015, 55(3):30-34, 103.(in Chinese)
[2] Federal Aviation Administration USA. 14 CFR part 25, §25.841-Pressurized cabins[S/OL].(2014-11-04)[2023-03-03] . https://www.ecfr.gov/current/title-14/chapter-I/subchapter-C/part-25/subpart-D/subject-group-ECFRc61d71ee0787390/section-25.841.
[3] 中国民用航空局.中国民用航空规章第25部运输类飞机适航标准:CCAR-25-R4[S]. 2011. Civil Aviation Administration of China. Civil aviation regulations of China. Part 25:Airworthiness standards for transport aircraft:CCAR-25-R4[S]. 2011.(in Chinese)
[4] 李大玉,赵坤,周魁斌,等.背板对聚甲基丙烯酸甲酯向下火蔓延的影响[J].清华大学学报(自然科学版), 2023, 63(5):783-791. LI D Y, ZHAO K, ZHOU K B, et al. Effects of the backboard on downward flame spread over polymethyl methacrylate[J]. Journal of Tsinghua University (Science and Technology), 2023, 63(5):783-791.(in Chinese)
[5] 陈松华,徐艳英,王志,等.通用航空碳纤维复合材料火灾危险性评价[J].消防科学与技术, 2019, 38(12):1645-1648. CHEN S H, XU Y Y, WANG Z, et al. Fire risk assessment of general aviation carbon fiber composites[J]. Fire Science and Technology, 2019, 38(12):1645-1648.(in Chinese)
[6] HIRSCH D, WILLIAMS J, BEESON H. Pressure effects on oxygen concentration flammability thresholds of materials for aerospace applications[J]. Journal of Testing and Evaluation, 2008, 36(1):69-72.
[7] KANURY A M. Modeling of pool fires with a variety of polymers[J]. Symposium (International) on Combustion, 1975, 15(1):193-202.
[8] ALPERT R L. Pressure modeling of fires controlled by radiation[J]. Symposium (International) on Combustion, 1977, 16(1):1489-1500.
[9] LAUTENBERGER C, TORERO J, FERNANDEZ-PELLO C. Understanding material flammability[M]//APTE V. Flammability testing of materials used in construction, transport and mining. 2nd ed. Oxford:Woodhead Publishing, 2022:1-22.
[10] DAO D Q, LUCHE F, RICHARD F, et al. Determination of characteristic parameters for the thermal decomposition of epoxy resin/carbon fibre composites in cone calorimeter[J]. International Journal of Hydrogen Energy, 2013, 38(19):8167-8178.
[11] ZARZECKI M, QUINTIERE J G, LYON R E, et al. The effect of pressure and oxygen concentration on the combustion of PMMA[J]. Combustion and Flame, 2013, 160(8):1519-1530.
[12] 郄军芳.辐射方向和海拔高度对固体可燃物热解及着火特性影响的实验研究[D].合肥:中国科学技术大学, 2011. QIE J F. Experimental study of the influences of orientation and altitude on pyrolysis and ignition of solid combustibles[D]. Hefei:University of Science and Technology of China, 2011.(in Chinese)
[13] 薛岩.低压条件下PE和ETFE导线火蔓延实验研究[D].合肥:中国科学技术大学, 2017. XUE Y. Experimental study of flame spread over PE and ETFE wire under sub-atmospheric conditions[D]. Hefei:University of Science and Technology of China, 2017.(in Chinese)
[14] WANG Z, WANG J. Experimental study on flame propagation over horizontal electrical wires under varying pressure[J]. International Journal of Thermal Sciences, 2020, 156:106492.
[15] 冯瑞,田润和,陈科位,等.低气压环境对固体燃烧特性影响的实验研究[J].清华大学学报(自然科学版), 2019, 59(2):111-121. FENG R, TIAN R H, CHEN K W, et al. Experimental study of the effect of low pressures on solid fuel combustion characteristics[J]. Journal of Tsinghua University (Science&Technology), 2019, 59(2):111-121.(in Chinese)
[16] GRINCHUK P S. Contact heat conductivity under conditions of high-temperature heat transfer in fibrous heat-insulating materials[J]. Journal of Engineering Physics and Thermophysics, 2014, 87(2):481-488.
[17] ISO. Reaction-to-fire tests-Heat release, smoke production and mass loss rate-Part l:Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement):ISO 5660-1:2015[S]. 2015.
[18] 黄松.低压条件下飞机典型内饰材料燃烧特性研究[D].德阳:中国民用航空飞行学院, 2019. HUANG S. Study on combustion properties of typical interior materials of aircraft under low ambient pressure[D]. Deyang:Civil Aviation Flight University of China, 2019.(in Chinese)
[19] 张政.低压环境下航空电缆燃烧特性研究[D].德阳:中国民用航空飞行学院, 2020. ZHANG Z. Study on combustion properties of aviation cable materials under low ambient pressure[D]. Deyang:Civil Aviation Flight University of China, 2020.(in Chinese)
[20] 徐利云,粘伟诚,王山英,等.废旧纤维制备蜂窝夹层复合材料的导热性研究[J].纤维复合材料, 2014, 31(1):30-33. XU L Y, NIAN W C, WANG S Y, et al. The study of thermal conductivity of honeycomb sandwich composite made from recycled waste fiber[J]. Fiber Composites, 2014, 31(1):30-33.(in Chinese)
[21] 吴大方,郑力铭,潘兵,等.非线性热环境下高温合金蜂窝板隔热性能研究[J].力学学报, 2012, 44(2):297-307. WU D F, ZHENG L M, PAN B, et al. Research on heat-shielding properties of superalloy honeycomb panel for non-linear high temperature environment[J]. Chinese Journal of Theoretical and Applied Mechanics, 2012, 44(2):297-307.(in Chinese)
[22] ZABETAKIS M G. Flammability characteristics of combustible gases and vapors[R]. Pittsburgh:U.S. Bureau of Mines, 1964.
[23] MCALLISTER S, FERNANDEZ-PELLO C, URBAN D, et al. Piloted ignition delay of PMMA in space exploration atmospheres[J]. Proceedings of the Combustion Institute, 2009, 32(2):2453-2459.
[24] CHEN R Y, LU S X, LI C H, et al. Correlation analysis of heat flux and cone calorimeter test data of commercial flame-retardant ethylene-propylene-diene monomer (EPDM) rubber[J]. Journal of Thermal Analysis and Calorimetry, 2016, 123(1):545-556.
[25] CHIU H T, CHIU S H, JENG R E, et al. A study of the combustion and fire-retardance behaviour of unsaturated polyester/phenolic resin blends[J]. Polymer Degradation and Stability, 2000, 70(3):505-514.
[26] 贾旭宏,杨晓光,黄松,等.低压条件下航空地毯燃烧特性研究[J].西北工业大学学报, 2020, 38(2):319-324. JIA X H, YANG X G, HUANG S, et al. Study on combustion properties of aviation carpet under low ambient pressure[J]. Journal of Northwestern Polytechnical University, 2020, 38(2):319-324.(in Chinese)
[27] 刘全义,孙中正,吕志豪,等.不同压力条件下典型机舱材料燃烧特征的实验研究[J].清华大学学报(自然科学版), 2019, 59(6):432-437. LIU Q Y, SUN Z Z, LÜ Z H, et al. Experimental study of the burning characteristics of typical aircraft cabin materials at various pressures[J]. Journal of Tsinghua University (Science and Technology), 2019, 59(6):432-437.(in Chinese)
[28] 杨满江.高原环境下压力影响气体燃烧特征和烟气特性的实验与模拟研究[D].合肥:中国科学技术大学, 2011. YANG M J. Experimental and computational study on the effects of low atmospheric pressure on the gas fuel combustion characteristics and smoke properties under high attitudes[D]. Hefei:University of Science and Technology of China, 2011.(in Chinese)
[1] LIU Quanyi, SUN Zhongzheng, LÜ Zhihao, JIA Xuhong, ZHI Maoyong, ZHANG Hui. Experimental study of the burning characteristics of typical aircraft cabin materials at various pressures[J]. Journal of Tsinghua University(Science and Technology), 2019, 59(6): 432-437.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
Copyright © Journal of Tsinghua University(Science and Technology), All Rights Reserved.
Powered by Beijing Magtech Co. Ltd