[1] Lefebvre A H. Atomization and Sprays[M]. New York:Hemisphere Pub Corp, 1989.[2] Mullinger P J, Chigier N A. The design and performance of internal mixing multijet twin fluid atomizers[J]. Journal of the Institute of Fuel, 1974, 47(393):251-261.[3] Lefebvre A H, Wang X F, Martin C A. Spray characteristics of aerated-liquid pressure atomizers[J]. Journal of Propulsion and Power, 1988, 4(4):293-298.[4] Ferreira G, Barreras F, Lozano A, et al. Effect of the inner two-phase flow on the performance of an industrial twin-fluid nozzle with an internal mixing chamber[J]. Atomization & Sprays, 2009, 19(9):873-884.[5] Kufferath A, Wende B, Leuckel W. Influence of liquid flow conditions on spray characteristics of internal-mixing twin-fluid atomizers[J]. International Journal of Heat & Fluid Flow, 1999, 20(5):513-519.[6] Chin J S, Lefebvre A H. Flow patterns in internal-mixing, twin-fluid atomizers[J]. Atomization & Sprays, 1993, 3(4):463-475.[7] Kim S, Kondo S, Nishida K, et al. Effects of mixing chamber geometry and flow on spray characteristics from an internal mixing twin-fluid atomizer[J]. International Journal of Fluid Mechanics Research, 1997, 24(1-3):76-87.[8] Karnawat J, Kushari A. Controlled atomization using a twin-fluid swirl atomizer[J]. Experiments in Fluids, 2006, 41(4):649-663.[9] Qian L, Lin J, Xiong H. A fitting formula for predicting droplet mean diameter for various liquid in effervescent atomization spray[J]. Journal of Thermal Spray Technology, 2010, 19(3):586-601.[10] Sovani S D, Sojka P E, Lefebvre A H. Effervescent atomization[J]. Progress in Energy and Combustion Science, 2001, 27(4):483-521.[11] Xiong H, Qian L, Lin J. Simulation of droplet-gas flow in the effervescent atomization spray with an impinging plate[J]. Chinese Journal of Chemical Engineering, 2009, 17(1):8-19.[12] Ishii M. One-dimensional drift-flux model and constitutive equations for relative motion between phases in various two-phase flow regimes, ANL-77-47[R]. Illinois:Argonne National Lab, 1977.[13] 刘联胜, 杨华, 吴晋湘, 等. 环状出口气泡雾化喷嘴液膜破碎过程与喷雾特性[J]. 燃烧科学与技术, 2005, 11(2):121-125.LIU Liansheng, YANG Hua, WU Jinxiang, et al. Studies on breakup of liquid sheet and spray characteristics downstream of the annular spout effervescent atomizer[J]. Journal of Combustion Science and Technology, 2005, 11(2):121-125. (in Chinese)[14] 盛刚浩, 张海滨, 赵中闯, 等. 横向气流中环状流射流液膜的破碎与雾化[J]. 中国科学院大学学报, 2017, 34(2):160-165.SHENG Ganghao, ZHANG Haibin, ZHAO Zhongchuang, et al. Breakup and atomization of annular flow jet in crossflow[J]. Journal of University of Chinese Academy of Science, 2017, 34(2):160-165. (in Chinese)[15] Rizk N K, Lefebvre A H. The influence of liquid film thickness on airblast atomization[J]. Journal of Engineering for Power, 1980, 102(3):706-710.[16] 章明川, 吕勇, 王峻晔, 等. Y型喷嘴内部气液两相流动及液膜雾化的数学模型[J]. 燃烧科学与技术, 2000, 6(3):205-209.ZHANG Mingchuan, LÜ Yong, WANG Junye, et al. Mathematical modeling on the gas-liquid two phase flow in the Y-jet nozzle and its atomization process[J]. Journal of Combustion Science and Technology, 2000, 6(3):205-209.(in Chinese)[17] 赵其寿, 甘晓华. 空气雾化喷嘴内液膜厚度研究[J]. 工程热物理学报, 1985, 6(4):378-384.ZHAO Qishou, GAN Xiaohua. Study on liquid film thickness inside airblast atomizers[J]. Journal of Engineering Thermophysics, 1985, 6(4):378-384. (in Chinese)