高速电主轴中主轴-机壳振动传递力学模型

刘成颖; 郑烽; 王立平

doi:10.16511/j.cnki.qhdxxb.2018.21.015

PDF(4810 KB)

清华大学学报（自然科学版） ›› 2018, Vol. 58 ›› Issue (7) : 671-676. DOI: 10.16511/j.cnki.qhdxxb.2018.21.015

机械工程

高速电主轴中主轴-机壳振动传递力学模型

刘成颖^1,3, 郑烽², 王立平^1,3

作者信息 +

Vibration transmission mechanical model between the shaft and housing of a high speed motor spindle

LIU Chengying^1,3, ZHENG Feng², WANG Liping^1,3

Author information +

文章历史 +

摘要

主轴的振动是影响机床加工精度的重要因素，且包含大量机床的工况信息。在保证精度的条件下，为实现主轴振动加速度能够在机壳外部测量，建立了主轴与机壳之间的振动传递力学模型。针对力学模型中的未知参数，基于Hertz理论和最小二乘法理论相结合的方法求解出轴承的线性刚度；基于Hooke定律，利用Ansys软件求解出电主轴固定基座的刚度。以170XDS20Z11型电主轴作为实验对象进行实验验证与仿真分析。结果表明：在机壳上测量振动信号，通过该模型可以高效、准确地推导出主轴真实振动。此理论可以运用到主轴振动间接测量方法中，提高测量精度。

Abstract

Spindle vibration is an important factor affecting the machining accuracy of machine tools with the vibrations reflecting a large amount of working condition information about the machine tool. A vibration transmission mechanics model was developed to model the coupling between the shaft and the chassis to improve machining accuracy when measuring the acceleration of the main shaft outside the shell. Hertz theory was used to calculate the bearing stiffness because of unknown parameters in the mechanical model. The base stiffness was calculated using Ansys and Hooke's theory. The vibrations of a 170XDS20Z11 motorized spindle were analyzed with the results showing that the spindle vibrations can be efficiently and accurately measured by measuring the shell vibrations. This theory can be applied to indirect measurements of spindle vibrations to improve measurement accuracy.

导出引用

刘成颖, 郑烽, 王立平. 高速电主轴中主轴-机壳振动传递力学模型[J]. 清华大学学报（自然科学版）. 2018, 58(7): 671-676 https://doi.org/10.16511/j.cnki.qhdxxb.2018.21.015

LIU Chengying, ZHENG Feng, WANG Liping. Vibration transmission mechanical model between the shaft and housing of a high speed motor spindle[J]. Journal of Tsinghua University(Science and Technology). 2018, 58(7): 671-676 https://doi.org/10.16511/j.cnki.qhdxxb.2018.21.015

参考文献

[1] 江浩. 铣削加工振动主动控制[D].上海:上海交通大学, 2009.JIANG H. Active vibration control in milling[D].Shanghai:Shanghai Jiao Tong University, 2009. (in Chinese)
[2] 周大帅. 高速电主轴综合性能测试及若干关键技术研究[D].北京:北京工业大学, 2011.ZHOU D S. Reseach on high-speed spindle comprehensive performance testing and some keys technological[D].Beijing:Beijing University of Technology, 2011. (in Chinese)
[3] 万海波, 杨世锡. 基于HHT的数控机床主轴振动监测系统的研制[J]. 振动与冲击, 2014, 33(6):48-52.WAN H B, YANG S X. Development of HHT-based vibration monitoring system for NC spindle[J]. Journal of Vibration and Shock, 2014, 33(6):48-52.(in Chinese)
[4] Clough D A, Fletcher S, Longstaff A P, et al. Non-contact measurement and analysis of machine tool spindles[C]//Proceedings of 2010 Computing and Engineering Annual Researchers' Conference. Huddersfield, UK:University of Huddersfield, 2010.
[5] 汪顺利, 丁毓峰, 王琳,等. 基于LabVIEW的机床主轴振动测量与分析[J]. 组合机床与自动化加工技术, 2014(2):32-35, 39.WANG S L, DING Y F, WANG L, et al. Vibration signal measurement and analysis of machine spindle based on LabVIEW[J]. Modular Machine Tool & Automatic Manufacturing Techniqu, 2014(2):32-35, 39. (in Chinese)
[6] 张祥雷, 冯伟, 陈站,等. 主轴振动测试及温升对主轴振动的影响[J]. 机械工程师, 2014(2):8-9.ZHANG X L, FENG W, CHEN Z, et al. Spindle vibration test and influence of temperature rise to the vibration[J]. Mechanical Engineer, 2014(2):8-9. (in Chinese)
[7] 陈超. 高速电主轴动态加载可靠性试验及其故障诊断研究[D].长春:吉林大学, 2016.CHEN C. The reliability test with dynamic load and fault diagnosis of high-speed motorized spindle[D].Changchun:Jilin University, 2016. (in Chinese)
[8] 李先广, 杨勇. 数控滚齿机滚刀主轴振动特性研究[J]. 机械工程学报, 2017, 53(1):130-139.LI X G, YANG Y. Research on the vibration properties of hob spindle for CNC gear hobbing machine[J]. Journal of Mechanical Engineering, 2017, 53(1):130-139. (in Chinese)
[9] AMIRAT Y, BENBOUZID M E H, BENSAKER B, et al. Condition monitoring and fault diagnosis in wind energy conversion systems:A review[C]//Proceedings of 2007 IEEE International Electric Machines & Drives Conference. Antalya, Turkey:IEEE, 2007:1434-1439.
[10] HARRIS T A, KOTZALAS M N. Advanced concepts of bearing technology[M]. 5th ed. Boca Raton:Taylor & Francis, 2006.
[11] 杜迎辉, 邱明, 蒋兴奇,等. 高速精密角接触球轴承刚度计算[J]. 轴承, 2001(11):5-8.DU Y H, QIU M, JING X Q, et al. Stiffness calculation of high speed precision angular contact ball bearings[J]. bearings, 2001(11):5-8. (in Chinese)
[12] 万俟昊天, 向阳, 夏雪宝,等. 过盈配合面的接触刚度和接触阻尼计算研究[J]. 船海工程, 2013, 42(3):85-90.MOQI H T, XIANG Y, XIA X B et al. Research on calculation of contact stiffness and contact damping of interference-fit surface[J]. Ship & Ocean Engineering, 2013, 42(3):85-90. (in Chinese)
[13] AHMADI A M, PETERSEN D, HOWARD C. A nonlinear dynamic vibration model of defective bearings:The importance of modelling the finite size of rolling elements[J]. Mechanical Systems and Signal Processing, 2015, 52-53:309-326.

基金

国家科技重大专项（2014ZX04001051）

PDF(4810 KB)

Accesses

Citation

Detail

段落导航

收稿日期	出版日期
2018-01-18	2018-07-15
发布日期
2018-07-15

选择文件类型/文献管理软件名称

选择包含的内容

摘要

Abstract

关键词

Key words

引用本文

{{custom_sec.title}}

{{custom_sec.title}}

参考文献

基金

访问统计

模态框（Modal）标题

选择文件类型/文献管理软件名称

选择包含的内容

摘要

Abstract

关键词

Key words

引用本文

{{custom_sec.title}}

{{custom_sec.title}}

参考文献

基金

访问统计