煤层干式钻孔粉尘运动及粒径分布的数值模拟

张福宏; 陈举师; 高杨; 汲银凤

doi:10.16511/j.cnki.qhdxxb.2018.22.046

PDF(15121 KB)

清华大学学报（自然科学版） ›› 2018, Vol. 58 ›› Issue (10) : 872-880. DOI: 10.16511/j.cnki.qhdxxb.2018.22.046

土木工程

煤层干式钻孔粉尘运动及粒径分布的数值模拟

张福宏¹, 陈举师¹, 高杨², 汲银凤¹

作者信息 +

Numerical simulation of the dust movement and particle size distribution during dry drilling in a coal seam

ZHANG Fuhong¹, CHEN Jushi¹, GAO Yang², JI Yinfeng¹

Author information +

文章历史 +

摘要

为有效地减轻煤层干式钻孔粉尘污染，改善现有粉尘防治效果，运用SolidWorks联合DesignModeler建模，采用Fluent对煤层干式钻孔粉尘运动进行数值模拟。研究发现：粉尘颗粒自孔底产生后，在环状狭缝射流及钻杆持续转动的双重作用下，向孔口方向高速喷出。随着粉尘颗粒在钻场内不断运动，粉尘扩散速度逐渐降低，粉尘质量流率不断减小，R-R分布指数缓慢增大，粉尘中位径及R-R特征粒径先增大后减小。粉尘质量浓度随时间推移先逐渐增大至最大值，而后围绕该最大值小幅波动；沿程先迅速上升至最大值，而后急剧降低至较小值，再逐步缓慢降低。该研究可为煤层干式钻孔粉尘控制装置结构参数的设定提供指导。

Abstract

This paper describes a numerical simulation of the dust movement during dry drilling in a coal seam to reduce dust pollution and improve dust control in a mine. SolidWorks and DesignModeler are used to build the models with Fluent then used to calculate the flow field. The results show that the jet flow from the cyclic slits and the continuous rotation of the drill pipe spew dust particles out from the bottom hole at high speed in the direction of the orifices. As the dust particles move away from the drill, the dust diffusion and mass flow rate gradually decrease. The R-R distribution index increases slowly with the median dust particle diameter and the R-R characteristic size first increasing and then decreasing. The dust concentration gradually increases to a maximum and then fluctuates a small amount around the maximum over time. The dust mass concentration along the seam quickly rose to a maximum, then dropped sharply and then more slowly. The results are then used to determine the structural parameters of dust control equipment during dry drilling in coal seams.

导出引用

张福宏, 陈举师, 高杨, 汲银凤. 煤层干式钻孔粉尘运动及粒径分布的数值模拟[J]. 清华大学学报（自然科学版）. 2018, 58(10): 872-880 https://doi.org/10.16511/j.cnki.qhdxxb.2018.22.046

ZHANG Fuhong, CHEN Jushi, GAO Yang, JI Yinfeng. Numerical simulation of the dust movement and particle size distribution during dry drilling in a coal seam[J]. Journal of Tsinghua University(Science and Technology). 2018, 58(10): 872-880 https://doi.org/10.16511/j.cnki.qhdxxb.2018.22.046

参考文献

[1] 吴代安. 煤层干式打钻孔口除尘装置研究与设计[D]. 淮南:安徽理工大学, 2010. WU D A. Research and design on dust collector of drilling dry hole at orifice in coal seam[D]. Huainan:Anhui University of Science and Technology, 2010. (in Chinese)
[2] 程亮, 卢义玉, 葛兆龙, 等. 煤层钻孔孔口气-固引射除尘装置设计与实验研究[J]. 应用基础与工程科学学报, 2015, 23(6):1109-1119. CHENG L, LU Y Y, GE Z L, et al. Design and experimental study of gas-solid ejecting dust removal apparatus used in coal drilling[J]. Journal of Basic Science and Engineering, 2015, 23(6):1109-1119. (in Chinese)
[3] 李栋, 卢义玉, 王洁, 等. 瓦斯抽放孔射流排水排渣方法与实验研究[J]. 采矿与安全工程学报, 2012, 29(2):283-288. LI D, LU Y Y, WANG J, et al. Method and experimental study on draining water and cinder by jet in gas drainage hole[J]. Journal of Mining & Safety Engineering, 2012, 29(2):283-288. (in Chinese)
[4] 王海峰, 李增华, 杨永良. 钻孔风力排渣最小风速及压力损失研究[J]. 煤矿安全, 2005, 36(3):4-6. WANG H F, LI Z H, YANG Y L. Study on lowest wind speed and pressure loss of drilling dust extraction with wind-force for borehole[J]. Safety in Coal Mines, 2005, 36(3):4-6. (in Chinese)
[5] 杨永良, 李增华, 高文举, 等. 煤层钻孔风力排渣模拟实验研究[J]. 采矿与安全工程学报, 2006, 23(4):415-418. YANG Y L, LI Z H, GAO W J, et al. Simulative experiment of pneumatic slag off for bore holes in coal seams[J]. Journal of Mining & Safety Engineering, 2006, 23(4):415-418. (in Chinese)
[6] 王永龙, 翟新献, 孙玉宁. 刻槽钻杆应用于突出煤层钻进的合理参数研究[J]. 煤炭学报, 2011, 36(2):304-307. WANG Y L, ZHAI X X, SUN Y N. Reasonable parameters study on grooved drill pipe used in drilling outburst coal seam[J]. Journal of China Coal Society, 2011, 36(2):304-307. (in Chinese)
[7] 武帅, 杨胜强. 高压气流引射喷雾降尘除尘技术应用研究[J]. 煤炭工程, 2012(5):64-66. WU S, YANG S Q. Applied study on dust reduction and control technology with high pressure air jet spray[J]. Coal Mine Engineering, 2012(5):64-66. (in Chinese)
[8] 刘晓蕊, 李宝玉. 新型泡沫除尘系统在井下突出软煤层钻孔中的应用[J]. 煤矿机械, 2010, 31(5):198-200. LIU X R, LI B Y. New system of foam dust remove and application when boring hole in outburst soft coat seam[J]. Coal Mine Machinery, 2010, 31(5):198-200. (in Chinese)
[9] 曹化朋. 钻孔口高射吸比水力旋转射流吸除尘的研究[D]. 镇江:江苏大学, 2010. CAO H P. Study on hydraulic rotation jet dust catcher with high ratio of water jet on drilling site[D]. Zhenjiang:Jiangsu University, 2010. (in Chinese)
[10] 陈举师, 姜兰, 蒋仲安. 边坡钻孔作业中粉尘分布及其影响因素的数值模拟[J]. 工程科学学报, 2015, 37(6):685-692. CHEN J S, JIANG L, JIANG Z A. Numerical simulation of dust distribution and influencing factors in slope drilling[J]. Chinese Journal of Engineering, 2015, 37(6):685-692. (in Chinese)
[11] 蒋仲安, 姜兰, 陈举师. 露天矿潜孔打钻粉尘浓度分布规律数值模拟[J]. 深圳大学学报理工版, 2013, 30(3):313-318. JIANG Z A, JIANG L, CHEN J S. Numerical simulation of dust concentration distribution regularities of down-the-hole drilling in open-pit mine[J]. Journal of Shenzhen University (Science and Engineering), 2013, 30(3):313-318. (in Chinese)
[12] 陈举师, 蒋仲安, 谭聪. 岩巷综掘工作面通风除尘系统的数值模拟[J]. 哈尔滨工业大学学报, 2015, 47(2):98-103. CHEN J S, JIANG Z A, TAN C. Numerical simulation of dust removal and ventilation system in the rock comprehensive tunneling face[J]. Journal of Harbin Institute of Technology, 2015, 47(2):98-103. (in Chinese)
[13] 蒋仲安, 陈举师, 王晶晶, 等. 胶带输送巷道粉尘运动规律的数值模拟[J]. 煤炭学报, 2012, 37(4):659-663. JIANG Z A, CHEN J S, WANG J J, et al. Numerical simulation of dust movement regularities in belt conveyer roadway[J]. Journal of China Coal Society, 2012, 37(4):659-663. (in Chinese)
[14] 陈绍杰, 陈举师, 汲银凤, 等. 煤层注水促抽瓦斯及其影响因素的数值模拟[J]. 哈尔滨工业大学学报, 2017, 49(11):87-94. CHEN S J, CHEN J S, JI Y F, et al. Numerical simulation of coal seam water infusion promoting methane drainage and its influence factors[J]. Journal of Harbin Institute of Technology, 2017, 49(11):87-94. (in Chinese)
[15] 丁旭东. 干式钻进煤尘在巷道中运移及分布规律的研究[D]. 淮南:安徽理工大学, 2012. DING X D. Study of migration and distribution of non-circulation drilling coal dust in roadways[D]. Huainan:Anhui University of Science and Technology, 2012. (in Chinese)

基金

国家自然科学基金资助项目（51604018）

PDF(15121 KB)

Accesses

Citation

Detail

段落导航

收稿日期	出版日期
2018-05-19	2018-10-15
发布日期
2018-10-17

选择文件类型/文献管理软件名称

选择包含的内容

摘要

Abstract

关键词

Key words

引用本文

{{custom_sec.title}}

{{custom_sec.title}}

参考文献

基金

访问统计

模态框（Modal）标题

选择文件类型/文献管理软件名称

选择包含的内容

摘要

Abstract

关键词

Key words

引用本文

{{custom_sec.title}}

{{custom_sec.title}}

参考文献

基金

访问统计