[1] UNNARKAT A P, SRIDHAR T, WANG H T, et al. Cobalt molybdenum oxide catalysts for selective oxidation of cyclohexane[J]. AIChE Journal, 2016, 62(12):4384-4402.
[2] 刘懿, 朱明乔, 王磊, 等. 微管内环己烷无催化氧化工艺条件对产物分布影响研究[J]. 高校化学工程学报, 2016, 30(2):378-383.LIU Y, ZHU M Q, WANG L, et al. Effects of process conditions on products distribution of cyclohexane non-catalytic oxidation in microcapillary[J]. Journal of Chemical Engineering of Chinese Universities, 2016, 30(2):378-383. (in Chinese)
[3] 李湘平, 周卫东. 环己酮生产现状及下游产业链分析[J]. 石油化工技术与经济, 2016, 32(4):1-5.LI X P, ZHOU W D. Analysis on production status and downstream industrial chain of cyclohexanone[J]. Technology & Economics in Petrochemicals, 2016, 32(4):1-5. (in Chinese)
[4] BHATTACHARY A. Modeling a continuous multistage liquid phase cyclohexane oxidation reactor network[J]. Chemical Engineering and Processing, 2005, 44:567-579.
[5] AGUSTRIYANTO R, FATMAWATI A. Model of steady state cyclohexane oxidation for ketone-alcohol (K-A) oil production[J]. Makara Journal of Science, 2014, 18(3):91-95.
[6] 张述伟, 余丰年, 俞裕国. 计算机辅助环己烷氧化反应器扩产的研究[J]. 大连理工大学学报, 1991, 31(3):287-292.ZHANG S W, YU F N, YU Y G. Study of increase in capacity of industrial cyclohexane oxidation reaction system[J]. Journal of Dalian University of Technology, 1991, 31(3):287-292. (in Chinese)
[7] 夏评, 王弘轼, 宋维端. 环己烷氧化过程的模拟与分析[J]. 华东化工学院学报, 1992, 18(6):388-393.XIA P, WANG H S, SONG W D. Simulation and analysis of cyclohexane oxidation process[J]. Journal of East China Institute of Chemical Technology, 1992, 18(6):388-393. (in Chinese)
[8] 田震华, 魏寿彭, 阚学成, 等. 环己烷氧化过程的模拟和优化[J]. 北京化工学院学报, 1994, 21(2):5-12.TIAN Z H, WEI S P, KAN X C, et al. Simulation and optimization for process of the oxidation of cyclohexane[J]. Journal of Beijing Institute of Chemcial Technology, 1994, 21(2):5-12. (in Chinese)
[9] 周权. 环己烷无催化氧化工艺研究[D]. 大连:大连理工大学, 2006.ZHOU Q. Study of the optimization of non-catalytic oxidation of cyclohexane[D]. Dalian:Dalian University of Technology, 2006. (in Chinese)
[10] WILKE C R, CHANG P. Correlation of diffusion coefficients in dilute solutions[J]. AIChE Journal, 1995, 1(2):264-270.
[11] AKITA K, YOSHIDA F. Bubble size, interfacial area, and liquid-phase mass transport coefficient in bubble columns[J]. Industrial and Engineering Chemistry Process Design and Development, 1974, 13(1):84-91.
[12] YAWS C L. Thermodynamic and physical property data[M]. New York, USA:Gulf Publishing Co New, 1992.
[13] FISCHER J, LANGE T, BOEHLING R, et al. Uncatalyzed selective oxidation of liquid cyclohexane with air in a microcapillary reactor[J]. Chemical Engineering Science, 2010, 65:4866-4872.
[14] SURESH A K, STRIDHAR T, POTTER O E. Autocatalytic oxidation of cyclohexane mass transport and chemical reaction[J]. AIChE Jounal, 1988, 34(1):81-93.
[15] COQUELET C, SOO C, VALTZ A, et al. "Vapor-liquid" equilibrium measurements and modeling for the cyclohexane+ cyclohexanol binary system[J]. Fluid Phase Equilibria, 2010, 298(1):33-37.
[16] 陈纪忠, 费黎明, 范镇, 等. 环己烷液相无催化剂的氧化动力学研究[J]. 化学反应工程与工艺, 1992, 9(3):237-245.CHEN J Z, FEI L M, FAN Z, et al. A study on the kinetics of liquid phase oxidation of cyclohexane without catalyst[J]. Chemical Reaction Engineering and Technology, 1992, 9(3):237-241. (in Chinese)
[17] KRZYSZTOFORSKI A, WOJCIK Z, POHORECKI R, et al. Industrial contribution to the reaction engineering of cyclohexane oxidation[J]. Industrial & Engineering Chemistry Process Design & Development, 1986, 25(4):894-898.
[18] JEVTIV R, RAMACHANDRAN P A, DUDUKOVIC M P. Effect of oxygen on cyclohexane oxidation:A stirred tank study[J]. Industrial & Engineering Chemistry Research, 2009, 48:7986-7993.
[19] CHEN J R. An inherently safer process of cyclohexane oxidation using pure oxygen:An example of how better process safety leads to better productivity[J]. Process Safety, 2004, 23(1):72-81.