[1] 李永生, 李建国. 波形膨胀节实用技术[M]. 北京:化学工业出版社, 2000. LI Y S, LI J G. Practical technology for bellows expansion joints[M]. Beijing:Chemical Industry Press, 2000.(in Chinese)
[2] IL'IN L A, LOBKOVA N A, LOS A O, et al. Approximate method of calculations for a helically corrugated tube[J]. Soviet Applied Mechanics, 1983, 19(9):764-767.
[3] BOLUND B, BERNHOFF H, LEIJON M. Flywheel energy and power storage systems[J]. Renewable & Sustainable Energy Reviews, 2007, 11(2):235-258.
[4] 戴兴建, 邓占峰, 刘刚, 等. 大容量先进飞轮储能电源技术发展状况[J]. 电工技术学报, 2011, 26(7):133-140. DAI X J, DENG Z F, LIU G, et al. Review on advanced flywheel energy storage system with large scale[J]. Transactions of China Electrotechnical Society, 2011, 26(7):133-140.(in Chinese)
[5] MOUSAVI G S M, FARAJI F, MAJAZI A, et al. A comprehensive review of flywheel energy storage system technology[J]. Renewable & Sustainable Energy Reviews, 2017, 67:477-490.
[6] 汤双清. 飞轮储能技术及应用[M]. 武汉:华中科技大学出版社, 2007. TANG S Q. Flywheel energy storage technology and its application[M]. Wuhan:Huazhong University of Science and Technology Press, 2007.(in Chinese)
[7] PEREZ-APARICIO J L, RIPOLL L. Exact, integrated and complete solutions for composite flywheels[J]. Composite Structures, 2011, 93(5):1404-1415.
[8] HA S K, KIM S J, NASIR S U, et al. Design optimization and fabrication of a hybrid composite flywheel rotor[J]. Composite Structures, 2012, 94(11):3290-3299.
[9] 戴兴建, 张小章, 姜新建, 等. 清华大学飞轮储能技术研究概况[J]. 储能科学与技术, 2012, 1(1):64-68. DAI X J, ZHANG X Z, JIANG X J, et al. Flywheel energy storage technology in Tsinghua University[J]. Energy Storage Science and Technology, 2012, 1(1):64-68.(in Chinese)
[10] 唐长亮, 戴兴建, 汪勇. 多层混杂复合材料飞轮力学设计与旋转试验[J]. 清华大学学报(自然科学版), 2015, 55(3):361-367. TANG C L, DAI X J, WANG Y. Mechanical design and spin test of a multi-layer commingled composite flywheel[J]. Journal of Tsinghua University (Science and Technology), 2015, 55(3):361-367. (in Chinese)
[11] 杨启述. 气体离心机技术基础[M].北京:原子能出版社,1991. YANG Q S. Technical foundation of gas centrifuge[M]. Beijing:Atomic Energy Press, 1991.(in Chinese)
[12] REICH J, CARDELLA A, CAPRICCIOLI A, et al. Experimental verification of the axial and lateral stiffness of large W7-X rectangular bellows[J]. Fusion Engineering & Design, 2007, 82(15-24):1924-1928.
[13] 任宁, 欧开良, 王长路, 等. Ω形波纹管的轴向刚度研究[J]. 机械强度, 2011, 33(5):719-723. REN N, OU K L, WANG C L, et al. Research on the axial stiffness of Ω-shaped bellows[J]. Journal of Mechanical Strength, 2011, 33(5):719-723.(in Chinese)
[14] 徐志翘, 刘燕, 杨嘉实, 等. 变厚度U型波纹壳大挠度问题的摄动解[J]. 清华大学学报(自然科学版), 1985(1):39-51. XU Z Q, LIU Y, YANG J S, et al. Large deflection of a U-shaped bellows with varying thickness[J]. Journal of Tsinghua University (Science and Technology), 1985(1):39-51. (in Chinese)
[15] 修筑, 王纪民, 马建敏. 厚度变化对U型波纹管轴向刚度的影响[J]. 噪声与振动控制, 2012, 32(5):189-192. XIU Z, WANG J M, MA J M. The effects of thickness variation on axial stiffness of U-shaped bellows[J]. Noise and Vibration Control, 2012, 32(5):189-192.(in Chinese)
[16] BECHT C. Predicting bellows response by numerical and theoretical methods[J]. Journal of Pressure Vessel Technology, 1986, 108(3):334-341.
[17] SHEN Z P. Approximate calculation of U-shaped bellows[J]. Tsinghua Science and Technology, 1996, 1(3):305-309.
[18] 王永岗, 戴诗亮, 吕英民. 波纹管在任意载荷作用下的几何非线性分析[J]. 清华大学学报(自然科学版), 2002, 42(2):220-223. WANG Y G, DAI S L, LÜ Y M. Geometrically nonlinear analysis for arbitrarily loaded bellows[J]. Journal of Tsinghua University (Science and Technology), 2002, 42(2):220-223. (in Chinese)
[19] STEINBRINK S E, AGGARWAL M C, SHEPHERD K I M. Linear and nonlinear finite element analysis of an exhaust manifold with included bellows[C]//ASME 2007 Pressure Vessels and Piping Conference. New York:American Society of Mechanical Engineers, 2007:89-94.
[20] 张承宗. 复合材料板壳力学解析理论[M]. 北京:国防工业出版社, 2009. ZHANG C Z. Mechanics analysis theory of composite plate and shell[M]. Beijing:National Defense Industry Press, 2009.(in Chinese)
[21] MEYER-PIENING H R, FARSHAD M, GEIER B, et al. Buckling loads of CFRP composite cylinders under combined axial and torsion loading experiments and computations[J]. Composite Structures, 2001, 53(4):427-435.
[22] PARK J S, HONG C S, KIM C G, et al. Analysis of filament wound composite structures considering the change of winding angles through the thickness direction[J]. Composite Structures, 2002, 55(1):63-71.
[23] 舒朝霞, 杨福江. 波纹管弯曲刚度测试方法研究[C]//中国核科学技术进展报告(第四卷)——中国核学会2015年学术年会论文集第4册(同位素分离分卷). 北京:中国核学会, 2015:196-200. SHU Z X, YANG F J. Research on measuring method of bending stiffness of bellows[C]//China Nuclear Science and Technology Progress Report (Volume IV) -Proceedings of 2015 Annual Meeting of Chinese Nuclear Society, Volume 4(Isotope Separation Sub-volume). Beijing:Chinese Nuclear Society, 2015:196-200.(in Chinese)