[1] MA B, LIU Y H, GAO Y F, et al. Estimation of vehicle sideslip angle based on steering torque[J]. The International Journal of Advanced Manufacturing Technology, 2018, 94(9-12):3229-3237.
[2] 李晓雷, 李湘臣, 皮志兵, 等. JXK6822BEV纯电动客车转向匹配设计与测试[J]. 客车技术与研究, 2017, 39(2):12-14. LI X L, LI X C, PI Z B, et al. Matching design and test for JXK6822BEV pure electrical bus steering system[J]. Bus & Coach Technology and Research, 2017, 39(2):12-14. (in Chinese)
[3] CHEON D S, NAM K H. Steering torque control using variable impedance models for a steer-by-wire system[J]. International Journal of Automotive Technology, 2017, 18(2):263-270.
[4] ZHAO W Z, LI Y J, WANG C Y. Robust control of hand wheel torque for active front steering system[J]. Science China Technological Sciences, 2015, 58(1):107-116.
[5] 范璐, 周兵. 低附着路面电动助力转向系统助力控制研究[J]. 汽车工程, 2014, 36(7):862-866, 878. FAN L, ZHOU B. A study on the assistance control of electric power steering system on low-adhesion roads[J]. Automotive Engineering, 2014, 36(7):862-866, 878. (in Chinese)
[6] 周兵, 徐蒙, 范璐. 低附着路面电动助力转向控制策略[J]. 湖南大学学报(自然科学版), 2015, 42(2):29-34. ZHOU B, XU M, FAN L. Control strategy for electric power steering on low friction coefficient roads[J]. Journal of Hunan University (Natural Sciences), 2015, 42(2):29-34. (in Chinese)
[7] 吕绪宁. 汽车主动横向稳定杆与主动前轮转向协调控制研究[D]. 长沙:湖南大学, 2014. LU X N. Research on coordinated control of active roll stabilizer and active front steering system for vehicle[D]. Changsha:Hunan University, 2014. (in Chinese)
[8] 张小江, 丁宏刚, 朱亚夫, 等. 重型车辆轮胎原地转向阻力矩研究[J]. 机械设计与制造, 2013(1):217-219. ZHANG X J, DING H G, ZHU Y F, et al. Research on steering resisting moment of heavy vehicle during spot turn[J]. Machinery Design & Manufacture, 2013(1):217-219. (in Chinese)
[9] 杨翔宇, 吕世明, 李楠, 等. 汽车转向系统回正力矩模型的比较及仿真研究[J]. 机械设计与制造, 2016(2):258-262. YANG X Y, LÜ S M, LI N, et al. Comparison and simulation of aligning torque models of vehicle steering system[J]. Machinery Design & Manufacture, 2016(2):258-262. (in Chinese)
[10] 曾志辉. 由前轮转角及车速确定的前轮转向阻力矩的研究[J]. 时代汽车, 2016(6):47-48. ZENG Z H. Research on front wheel steering resistance moment determined by front wheel angle and speed[J]. Auto Time, 2016(6):47-48. (in Chinese)
[11] 刘竞一, 汪随风, 周建文. 原地转向阻力矩计算优化和试验验证[J]. 拖拉机与农用运输车, 2016, 43(6):14-18, 23. LIU J Y, WANG S F, ZHOU J W. Calculation optimization and test validation of pivot steering resistance torque[J]. Tractor & Farm Transporter, 2016, 43(6):14-18, 23. (in Chinese)
[12] CHO Y G. Vehicle steering returnability with maximum steering wheel angle at low speeds[J]. International Journal of Automotive Technology, 2009, 10(4):431-439.
[13] VAN ENDE K T R, KVÇVKAY F, HENZE R, et al. Vehicle and steering system dynamics in the context of on-centre handling[J]. International Journal of Automotive Technology, 2015, 16(5):751-763.
[14] 党建民, 陈慧, 赵祥磊, 等. 中间位置转向力特性主客观评价相关性的研究[J]. 汽车工程, 2015, 37(8):946-950. DANG J M, CHEN H, ZHAO X L, et al. A study on the correlation between subjective and objective evaluations for on-center steering force characteristics[J]. Automotive Engineering, 2015, 37(8):946-950. (in Chinese)
[15] 耶尔森·赖姆帕尔. 汽车底盘基础[M]. 张洪欣, 余卓平, 译. 北京:科学普及出版社, 1992. YERSON. Automobile chassis foundation[M]. ZHANG H X, YU Z P, Trans. Beijing:Science Popularization Press, 1992. (in Chinese)
[16] 王同建. 装载机线控转向技术研究[D]. 长春:吉林大学, 2006. WANG T J. Research of steer-by-wire technology on wheel loder[D]. Changchun:Jilin University, 2006. (in Chinese)
[17] VELENIS E, TSIOTRAS P, CANUDAS-DE-WIT C, et al. Dynamic tyre friction models for combined longitudinal and lateral vehicle motion[J]. Vehicle System Dynamics, 2005, 43(1):3-29.