[1] STOFF H. Incompressible flow in a labyrinth seal[J]. Journal of Fluid Mechanics, 1980, 100(4):817-829.
[2] RHODE D L, SOBOLIK S R. Simulation of subsonic flow through a generic labyrinth seal[J]. Journal of Engineering for Gas Turbines and Power, 1986, 108(4):674-680.
[3] MIYAKE K, ARIGA I. Leakage characteristics of rotating stepped labyrinth seals[J]. Transactions of the Japan Society of Mechanical Engineers, 1985, 51(466):1975-1980.
[4] 鲁周勋, 谢友柏, 丘大谋. 迷宫密封中流场的有限差分模拟[J]. 应用力学学报, 1992, 9(3):87-92.LU Z X, XIE Y B, QIU D M. Finite difference simulation of flow field in labyrinth seals[J]. Chinese Journal of Applied Mechanics, 1992, 9(3):87-92. (in Chinese)
[5] 朱高涛, 刘卫华. 迷宫密封泄漏量计算方法的分析[J]. 润滑与密封, 2006(4):123-126.ZHU G T, LIU W H. Analysis of calculation method of leakage of labyrinth seal[J]. Lubrication Engineering, 2006(4):123-126. (in Chinese)
[6] 丁学俊, 杨彦磊, 肖国俊, 等. 迷宫密封流场与泄漏特性研究[J]. 流体机械, 2006, 34(4):14-18.DING X J, YANG Y L, XIAO G J, et al. Investigation of flow and leakage in labyrinth seal[J]. Fluid Machinery, 2006, 34(4):14-18. (in Chinese)
[7] 马文生, 陈照波, 焦映厚. 偏心率和转速对迷宫密封力和动力学参数影响分析研究[J]. 振动工程学报, 2012, 25(3):282-287.MA W S, CHEN Z B, JIAO Y H. Study on the influence of eccentricity and rotating speed on labyrinth seal force and dynamic parameters[J]. Journal of Vibration Engineering, 2012, 25(3):282-287. (in Chinese)
[8] RHODE D L, HIBBS R I. Tooth thickness effect on the performance of gas labyrinth seals[J]. Journal of Tribology, 1992, 114(4):790-795.
[9] 尹露, 张万福, 潘渤, 等. 二氧化碳迷宫密封动力特性影响因素研究[J]. 热能动力工程, 2020, 35(6):28-36.YIN L, ZHANG W F, PAN B, et al. Study on influencing factors of dynamic characteristics for labyrinth seals with carbon dioxide[J]. Journal of Engineering for Thermal Energy and Power, 2020, 35(6):28-36. (in Chinese)
[10] 秦鹏博, 张万福, 曹浩, 等. 偏心迷宫密封动静特性研究[J]. 摩擦学学报, 2020, 200(6):52-62.QIN P B, ZHANG W F, CAO H, et al. Static and dynamic characteristics of eccentric labyrinth seals[J]. Tribology, 2020, 200(6):52-62. (in Chinese)
[11] 纪国剑, 吉洪湖. 直通篦齿静止衬套上磨损槽对泄漏特性影响的数值研究[J]. 航空动力学报, 2008, 23(8):1403-1408.JI G J, JI H H. Numerical investigation of effect of static bush with rub-grooves on the straight-through labyrinth seal leakage[J]. Journal of Aerospace Power, 2008, 23(8):1403-1408. (in Chinese)
[12] RHODE D L, HIBBS R I. Clearance effects on corresponding annular and labyrinth seal flow leakage characteristics[J]. Journal of Tribology, 1993, 115(4):699-704.
[13] DENECKE J, SCHRAMM V, KIM S, et al. Influence of rub-grooves on labyrinth seal leakage[J]. Journal of Turbomachinery, 2003, 125(2):771-779.
[14] 李宝良, 崔世昌, 徐治强,等. 一种高速旋转轴的新型复合密封设计[J]. 大连交通大学学报, 2019, 40(1):55-57.LI B L, CUl S C, XU Z Q, et al. Design of a new composite sealing of high speed reducer[J]. Journal of Dalian Jiaotong University, 2019, 40(1):55-57.(in Chinese)
[15] TOYOTA V. PTFE labyrinth seal for wind turbines has long service-life[J]. Sealing Technology, 2010(9):2-2.
[16] SMALL G. Outstanding physical properties make PEEK ideal for sealing applications[J]. Sealing Technology, 2014, 2014(4):9-12.
[17] DOWSON P, WALKER M S, WATSON A P. Development of abradable and rub-tolerant seal materials for application in centrifugal compressors and steam turbines[J]. Sealing Technology, 2004, 2004(12):5-10.
[18] 马亚如, 霍文浩, 刘婧, 等. 迷宫密封磨损失效泄漏特性和防碰磨结构设计研究[J]. 风机技术, 2019, 61(5):64-71.MA Y R, HUO W H, LIU J, et al. Investigations on the leakage performance of wear failure and anti-rubbing structure design for a labyrinth seal[J]. Chinese Journal of Turbomachinery, 2019, 61(5):64-71. (in Chinese)
[19] 孙丹, 王平, 赵欢, 等. 新型浮动式收敛袋型密封自适应同心性能数值与实验研究[J]. 航空动力学报, 2020, 41(3):325-335.SUN D, WANG P, ZHAO H, et al. Numerical and experimental study on adaptive concentric performance of a new floating convergent pocket seal[J]. Journal of Aerospace Power, 2020, 41(3):423270. (in Chinese)
[20] 孙丹, 王平, 王旭东, 等. 新型浮动式收敛袋型密封动力特性与自适应同心性能数值研究[J]. 推进技术, 2021, 42(2):406-414.SUN D, WANG P, WANG X D, et al. Investigation on rotordynamic characteristics and adaptive concentric performance of a new type of floating convergent pocket seal[J]. Journal of Propulsion Technology, 2021, 42(2):406-414. (in Chinese)