Observability analysis of MIMU devices in different conditions

XING Haifeng; CHEN Zhiyong; ZHANG Xinxi; GUO Meifeng

doi:10.16511/j.cnki.qhdxxb.2019.21.030

PDF(5867 KB)

Journal of Tsinghua University(Science and Technology) ›› 2020, Vol. 60 ›› Issue (1) : 82-88. DOI: 10.16511/j.cnki.qhdxxb.2019.21.030

MACHANICAL ENGINEERING

Observability analysis of MIMU devices in different conditions

{{article.zuoZhe_EN}}

Author information +

History +

Abstract

Micro inertial measurement units (MIMU) based on micro-electro-mechanical-system (MEMS) designs are very small and light with low power consumption, but they have large inertial errors that limit applications. The rotation modulation technique was used to reduce the influence of these errors so that the MIMU systems can more accurately identify the northern direction. However, there have been few observability analyses of MIMU devices with the observability closely related to whether the Kalman filtering can accurately estimate the error state. This study analyzes the MIMU observability using Kalman filtering based on measured data for stationary, multi-position and continuous rotation conditions. The results show that the heading angle error in the stationary condition is quite large and the device cannot be self-aligned. A multi-positioning scheme with rotation around the heading axis and the pitch axis makes the MIMU error state completely observable. With continuous rotation, the Kalman filtering can quickly estimate the heading angle and the azimuth accelerometer bias with the azimuth gyro drift estimated after a short period of time. The gyro drift and the accelerometer bias in the horizontal plane cannot be accurately estimated using Kalman filtering, but they can be measured by the north-seeking algorithm. The research provides a theoretical basis for improving the self-alignment accuracy of MIMU devices and evaluating their performance.

Key words

micro inertial measurement unit (MIMU) / observability / Kalman filtering / rotation modulation technique (RMT)

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

XING Haifeng, CHEN Zhiyong, ZHANG Xinxi, GUO Meifeng. Observability analysis of MIMU devices in different conditions[J]. Journal of Tsinghua University(Science and Technology). 2020, 60(1): 82-88 https://doi.org/10.16511/j.cnki.qhdxxb.2019.21.030

References

[1] ZHANG C H, CHEN J B, XU J H, et al. Application of correlation detection in rotation-modulation north-seeking based on MEMS gyroscope[C]//Proceedings of 2014 IEEE Chinese Guidance, Navigation and Control Conference, Yantai, China:Chinese Society of Aeronautics and Astronautics (CSAA), 2014:441-445.
[2] JOHNSON B, CHRIST K, ENDEAN D, et al. Tuning fork MEMS gyroscope for precision northfinding[C]//Proceedings of the 2015 DGON Inertial Sensors and Systems Symposium (ISS), Karlsruhe, Germany:Institute of Flight Guidance (IFF), 2015:1-10.
[3] ARIFFIN N H, ARSAD N, BAIS B. Low cost MEMS gyroscope and accelerometer implementation without Kalman filter for angle estimation[C]//IEEE International Conference on Advances in Electrical, Electronic and System Engineering (ICAEES), Putrajaya, Malaysia:National University of Malaysia (UKM), 2016:77-81.
[4] ZHANG Y J, ZHOU B, SONG M L, et al. A novel MEMS gyro north finder design based on the rotation modulation technique[J]. Sensors, 2017, 17(5):973.
[5] WU Y X, ZHANG H L, WU M P, et al. Observability of strapdown INS alignment:A global perspective[J]. IEEE Transactions on Aerospace and Electronic Systems, 2012, 48(1):78-102.
[6] 高亢, 陈希军, 任顺清, 等. SINS大失准角传递对准模型的可观测性分析[J]. 哈尔滨工业大学学报, 2019, 51(4):6-11. GAO K, CHEN X J, REN S Q, et al. A novel observability analysis method for SINS large misalignment angle transfer alignment model[J]. Journal of Harbin Institute of Technology, 2019, 51(4):6-11. (in Chinese)
[7] 王琪, 汪立新, 秦伟伟, 等. 基于局部可观测性分析的惯性平台连续自标定路径优化设计[J]. 中国惯性技术学报, 2018, 26(6):713-720. WANG Q, Wang L X, QIN W W, et al. Optimal design of continuous self-calibration path for inertial platform based on local observability analysis[J]. Journal of Chinese Inertial Technology, 2018, 26(6):713-720. (in Chinese)
[8] CHANDRASEKHARY R S, MURTHY B N. Novel two position ground alignment technique for strapdown inertial navigation system[C]//2014 IEEE International Conference on Aerospace Electronics and Remote Sensing Technology (ICARES), Yogyakarta, Indonesia:IEEE Aerospace & Electronic Systems Society (AESS), 2014:94-98.
[9] QIAN W X, LIU J Y, ZHAO W, et al. Novel method of improving the alignment accuracy of SINS on revolving mounting base[J]. Journal of Systems Engineering and Electronics, 2009, 20(5):1052-1057.
[10] CAO J Y, TANG J X, WANG Y, et al. Observability analysis of four-position alignment for laser gyroscope strap-down inertial navigation system[C]//Proceedings of 2011 International Conference on Electronics and Optoelectronics (ICEOE), Dalian, China:North University of China (NUC), 2011:227-230.
[11] DU S, SUN W, GAO Y. Improving observability of an inertial system by rotary motions of an IMU[J]. Sensors, 2017, 17(4):698.
[12] ZHOU Z, TAN Z, WANG X, et al. Modified dynamic north-finding scheme with a fiber optic gyroscope[J]. IEEE Photonics Journal, 2018, 10(2):1-10.
[13] 王琦, 高春峰, 应智慧, 等. 捷联惯导系统单位置初始对准可观测性分析[J]. 中国激光, 2018(1):18-23. WANG Q, GAO C F, YING Z H, et al. Observability analysis of fixed position initial alignment of strapdown inertial navigation system[J]. Chinese Journal of Lasers, 2018(1):18-23. (in Chinese)
[14] 刘志琴, 王新龙. 捷联惯导系统最优多位置对准的确定与分析[J]. 北京航空航天大学学报, 2013, 39(3):330-334. LIU Z Q, WANG X L. Determination and analysis of optimal multi-position alignment for strapdown inertial navigation system[J].Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(3):330-334. (in Chinese)