Experiment study on oupling characteristics of thermo-acoustic power generator heated by heat pipes

ZHANG Youjia; JIANG Shunli; ZHOU Huihui; YUAN Dewen; WU Zhanghua; XU Jianjun; YAN Xiao; SU Dongchuan; TIAN Wenxi

doi:10.16511/j.cnki.qhdxxb.2023.25.041

PDF(10583 KB)

Journal of Tsinghua University(Science and Technology) ›› 2023, Vol. 63 ›› Issue (8) : 1204-1212. DOI: 10.16511/j.cnki.qhdxxb.2023.25.041

Research Article

Experiment study on oupling characteristics of thermo-acoustic power generator heated by heat pipes

{{article.zuoZhe_EN}}

Author information +

History +

Abstract

[Objective] A highly reliable energy-dense power source is the critical core component of the facilities involved in space and ocean exploration. The heat pipe reactor is equipped with a compact solid-state core, which provides benefits such as high reliability, passive heat transfer, and long life, rendering it the ideal solution for the current multipurpose power supply. However, the technical feasibility, reliability, and performance of the alkali metal high-temperature heat pipe, which is the critical component of the heat pipe reactor, remains to be verified and tested. Furthermore, the integrated heat pipes and thermoelectric converter technology need to be validated. In addition, the coupled operating characteristics of heat pipes and thermoelectric converters under high-temperature operating conditions is an important issue that remains to be addressed, both theoretically and experimentally. The principle design of the heat pipe nuclear reactor power supply requires efficient support based on a sufficient amount of experimental data. This study verifies the principle feasibility of the heat pipe nuclear reactor used as a power supply. The operating state features of the alkali metal high-temperature heat pipes and thermo-acoustic power generators under startup and steady states are studied experimentally.[Methods] This paper studies the coupled operating characteristics of sodium heat pipes and thermo-acoustic power generators experimentally. A multihole stainless steel cube assembled with ten electric heating elements and four sodium heat pipes is used to simulate the heat pipe nuclear reactor. A specially designed thermo-acoustic power generator is fitted with two symmetrical generator units and used as the thermoelectric converter. Stimulate and activate the thermo-acoustic power generator while the heat pipes are in fully startup state is the critical operation of thermo-acoustic power generator coupling sodium heat pipe system startup and stable running.[Results] The key technology of sodium heat pipes and thermo-acoustic power generator-integrated system startup method was obtained in this study. The sodium heat pipe was of prominent thermal response, and the temperature buffer could effectively improve the reliability of the thermoelectric conversion system. The coupling characteristics featured by the temperature field evolution of sodium heat pipes and thermoelectric converters were obtained at steady states. The thermoelectric conversion efficiency of the system and the output power of the thermo-acoustic power generator increased as the heat pipe operating temperature rised. In the long-time operation test, with a system heating power of 1 900 W, the thermo-acoustic power generator output power and thermoelectric conversion efficiency were 360 W and 19.00%, respectively. In the limit test of the operating temperature, with a heating power of 2 300 W, the thermo-acoustic power generator output power and thermoelectric conversion efficiency were 463 W and 20.13%, respectively.[Conclusions] The integrated technique of high-temperature sodium heat pipes and thermo-acoustic-electric energy converter effectively simulates the processes of heat transfer and thermoelectric conversion of the thermoelectric conversion system based on a heat pipe reactor. The coupling characteristics of heat pipes and thermo-acoustic power generators are obtained. This study verified the energy conversion principle feasibility for a heat pipe reactor coupled with a thermo-acoustic power generator. The results of this study can provide support for the prototype design of a nuclear power facility based on a heat pipe reactor.

Key words

heat pipes / thermo-acoustic power generator / steady characteristics / nuclear power supply / thermoelectric conversion

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

ZHANG Youjia, JIANG Shunli, ZHOU Huihui, YUAN Dewen, WU Zhanghua, XU Jianjun, YAN Xiao, SU Dongchuan, TIAN Wenxi. Experiment study on oupling characteristics of thermo-acoustic power generator heated by heat pipes[J]. Journal of Tsinghua University(Science and Technology). 2023, 63(8): 1204-1212 https://doi.org/10.16511/j.cnki.qhdxxb.2023.25.041

References

[1] 冯景祥, 姚尧, 潘峰, 等. 国外水下无人装备研究现状及发展趋势[J]. 舰船科学技术, 2021, 43(12):1-8. FENG J X, YAO Y, PAN F, et al. Existence and development trend of underwater unmanned equipment in foreign countries[J]. Ship Science and Technology, 2021, 43(12):1-8. (in Chinese)
[2] 秋穗正, 张泽秦, 张智鹏, 等. 海洋静默式热管反应堆热工水力特性研究[J]. 原子能科学技术, 2022, 56(6):989-1004. QIU S Z, ZHANG Z Q, ZHANG Z P, et al. Study on thermal-hydraulic characteristics of ocean silent heat pipe cooled reactor[J]. Atomic Energy Science and Technology, 2022, 56(6):989-1004. (in Chinese)
[3] 余红星, 马誉高, 张卓华, 等. 热管冷却反应堆的兴起和发展[J]. 核动力工程, 2019, 40(4):1-8. YU H X, MA Y G, ZHANG Z H, et al. Initiation and development of heat pipe cooled reactor[J]. Nuclear Power Engineering, 2019, 40(4):1-8. (in Chinese)
[4] 胡古, 赵守智. 空间核反应堆电源技术概览[J]. 深空探测学报, 2017, 4(5):430-443. HU G, ZHAO S Z. Overview of space nuclear reactor power technology[J]. Journal of Deep Space Exploration, 2017, 4(5):430-443. (in Chinese)
[5] 朱安文, 刘磊, 马世俊, 等. 空间核动力在深空探测中的应用及发展综述[J]. 深空探测学报, 2017, 4(5):397-404. ZHU A W, LIU L, MA S J, et al. An overview of the use and development of nuclear power system in deep space exploration[J]. Journal of Deep Space Exploration, 2017, 4(5):397-404. (in Chinese)
[6] 代智文, 刘天才, 王成龙, 等. 空间核反应堆电源热工水力特性研究综述[J]. 原子能科学技术, 2019, 53(7):1296-1309. DAI Z W, LIU T C, WANG C L, et al. Research review on thermal-hydraulic performance of space nuclear reactor power[J]. Atomic Energy Science and Technology, 2019, 53(7):1296-1309. (in Chinese)
[7] 王傲, 申凤阳, 胡古, 等. 热管空间核反应堆电源的研究进展[J]. 核技术, 2020, 43(6):060002. WANG A, SHEN F Y, HU G, et al. A survey of heatpipe space nuclear reactor power supply[J]. Nuclear Techniques, 2020, 43(6):060002. (in Chinese)
[8] 姚成志, 胡古, 解家春, 等. 月球基地核电源系统方案研究[J]. 原子能科学技术, 2016, 50(3):464-470. YAO C Z, HU G, XIE J C, et al. Scheme research of nuclear reactor power system for lunar base[J]. Atomic Energy Science and Technology, 2016, 50(3):464-470. (in Chinese)
[9] SUN H, WANG C L, MA P, et al. Conceptual design and analysis of a multipurpose micro nuclear reactor power source[J]. Annals of Nuclear Energy, 2018, 121:118-127.
[10] STERBENTZ J W, WERNER J E, MCKELLAR M G, et al. Special purpose nuclear reactor (5 MW) for reliable power at remote sites assessment report[R]. Idaho Falls:Idaho National Laboratory, 2017.
[11] 卫光仁, 柴宝华, 韩冶, 等. 高温钠热管传热性能试验研究[J]. 原子能科学技术, 2021, 55(6):1039-1046. WEI G R, CHAI B H, HAN Y, et al. Experimental study on heat transfer performance of high temperature sodium heat pipe[J]. Atomic Energy Science and Technology, 2021, 55(6):1039-1046. (in Chinese)
[12] 杨海旺, 代智文, 王成龙. 碱金属高温热管传热特性研究综述[J]. 热加工工艺, 2022, 51(20):1-7. YANG H W, DAI Z W, WANG C L. Review on transferring characteristics of alkali metal high temperature heat pipe[J]. Hot Working Technology, 2022, 51(20):1-7. (in Chinese)
[13] 刘逍, 田智星, 王成龙, 等. 高温热管传热特性实验研究[J]. 核动力工程, 2020, 41(S1):106-111. LIU X, TIAN Z X, WANG C L, et al. Experimental study on heat transfer performance of high temperature potassium heat pipe[J]. Nuclear Power Engineering, 2020, 41(S1):106-111. (in Chinese)
[14] 张泽秦, 王成龙, 孙浩, 等. 碱金属高温热管启动运行特性分析[J]. 原子能科学技术, 2021, 55(6):1015-1023. ZHANG Z Q, WANG C L, SUN H, et al. Analysis of startup characteristics for alkali metal high temperature heat pipe[J]. Atomic Energy Science and Technology, 2021, 55(6):1015-1023. (in Chinese)
[15] 白冰鹤. 高温热管内部流动相变强化传热研究[D]. 北京:华北电力大学, 2021. BAI B H. Research on internal flow-phase change and heat transfer enhancement of high temperature heat pipe[D]. Beijing:North China Electric Power University, 2021. (in Chinese)
[16] 李金旺, 戴书刚. 高温热管技术研究进展与展望[J]. 中国空间科学技术, 2019, 39(3):30-42. LI J W, DAI S G. Recent progress and prospect of high-temperature heat pipes technology[J]. Chinese Space Science and Technology, 2019, 39(3):30-42. (in Chinese)
[17] 余国瑶. 热声发动机自激振荡过程及热声转换特性研究[D]. 北京:中国科学院理化技术研究所, 2008. YU G Y. Study of spontaneous oscillation and thermoacoustic conversion characteristics of thermoacoustic heat engines[D]. Beijing:Technical Institute of Physics and Chemistry, 2008. (in Chinese)
[18] 董世充. 行波热声发电系统能量转换特性的理论与实验研究[D]. 北京:华北电力大学, 2020. DONG S C. Theoretical and experimental research on energy conversion characteristic in traveling-wave thermoacoustic power generation system[D]. Beijing:North China Electric Power University, 2020. (in Chinese)