Development and key technology analysis of turbine-based combined cycle engine

LIN Weiquan; XU Hangrui; LAN Xudong

doi:10.16511/j.cnki.qhdxxb.2024.27.024

PDF(5913 KB)

Journal of Tsinghua University(Science and Technology) ›› 2024, Vol. 64 ›› Issue (9) : 1521-1535. DOI: 10.16511/j.cnki.qhdxxb.2024.27.024

AEROSPACE ENGINEERING

Development and key technology analysis of turbine-based combined cycle engine

{{article.zuoZhe_EN}}

Author information +

History +

Abstract

[Significance] With the rapid advancements in aerospace engineering technology, the performance requirements for aircraft are increasingly escalating. At present, there are numerous goals for aircraft utilization in military, transportation, and other sectors. Hypersonic aircraft, which operate under multiple operating conditions and across a wide velocity range, have become a hot research topic in many countries. A critical component of such high-performance aircraft is their power system. A high-performance aircraft must have a high-performance power system to match it. Existing mature power systems have limitations in terms of working conditions and performance. Therefore, the development trend has shifted toward combined power systems. Currently, prominent combined engines include rocket-based combined cycle (RBCC), turbine-based combined cycle (TBCC), air turborocket, and precooled engines. When considering factors like cost, performance, and safety, TBCC engines emerge as the most promising power system for hypersonic aircraft within the near space range of 20-100 km because of their flight envelope width, reusable, large unit thrust, and other advantages. Therefore, summarizing the key TBCC technologies and exploring their development path is crucial. [Progress] The United States, Japan, and the United Kingdom are pioneers in combined power research. These countries have achieved significant technical achievements, possess mature technologies, and have completed the entire research and development cycle for combined engine products. They are at the forefront of this field. In the future research and development strategy, the United States focuses on system-wide research of TBCC and RBCC technologies. Following the completion of the HYPR90 program, Japan has conducted an in-depth study into the precooled engine ATREX. Meanwhile, the UK continues its extensive research on SABRE, aiming to deploy it in future single-stage spacecraft. Other countries, such as Germany, Russia, and China, are also engaged in large-scale TBCC research, accumulating a large number of technologies to achieve breakthroughs from theory to engineering application in the future. In terms of TBCC key technologies, this paper analyzes and summarizes advancements in propulsion system technology and subsystem technology. For subsystems, current TBCC inlet forms are reviewed, with advanced mixed rectangular divergent and integrated multidimensional cross-sectional configurations being analyzed. The future direction points toward the development of 3D internal contraction inlets. The advantages and disadvantages of series and parallel exhaust systems are analyzed alongside the basic theory of the exhaust process, emphasizing the need for more theoretical support for exhaust systems. Numerous achievements in modal conversion control technology are listed, highlighting that future research should focus on integrating strongly coupled flight control with modal control technology. Regarding propulsion system technology, a comprehensive theoretical model for aircraft-engine integration is presented, pointing out the defects of the traditional separate design approach for aircraft and engines. This paper reviews the development of performance simulation and testing technologies domestically and internationally, suggesting that future assignments should involve developing sophisticated simulation software and building new test benches. [Conclusions and Prospects] The combined engine essentially integrates four types of engines: turbine, rocket, ramjet and precooled. This paper summarizes the key technologies of TBCC and explores their development routes while also providing three prospects for the future form of combined engines: combining new basic power forms, adopting new energy sources, and incorporating the external drive platforms.

Key words

aero engine / hypersonic / turbine-based combined cycle

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

LIN Weiquan, XU Hangrui, LAN Xudong. Development and key technology analysis of turbine-based combined cycle engine[J]. Journal of Tsinghua University(Science and Technology). 2024, 64(9): 1521-1535 https://doi.org/10.16511/j.cnki.qhdxxb.2024.27.024

References

[1] 李俊杰,胡秋晨,刘鹏超,等. TBCC发动机的典型方案及试验技术发展分析[J].火箭推进, 2022, 48(6):26-34, 68. LI J J, HU Q C, LIU P C, et al. Analysis of typical scheme and test technique development of TBCC engine[J]. Journal of Rocket Propulsion, 2022, 48(6):26-34, 68.(in Chinese)
[2] 王占学,张明阳,张晓博,等.变循环涡扇冲压组合发动机发展现状及关键技术分析[J].推进技术, 2020, 41(9):1921-1934. DOI:10.13675/j.cnki.tjjs.200321.WANG Z X, ZHANG M Y, ZHANG X B, et al. Development status and key technologies of variable cycle turbofan-ramjet engine[J]. Journal of Propulsion Technology, 2020, 41(9):1921-1934. DOI:10.13675/j.cnki.tjjs.200321.(in Chinese)
[3] 陈博,桂丰,李茜,等.国外并联式涡轮基组合循环发动机技术发展途径浅析[J].燃气涡轮试验与研究, 2019, 32(1):57-62. CHEN B, GUI F, LI Q, et al. Study on the development approach of foreign over/under TBCC engine technology[J]. Gas Turbine Experiment and Research, 2019, 32(1):57-62.(in Chinese)
[4] 李凌蔚,吴宋伟,张天宏,等.涡轮基变循环组合动力控制技术发展分析[J].推进技术, 2023, 44(11):2203092. DOI:10.13675/j.cnki.tjjs.2203092.LI L W, WU S W, ZHANG T H, et al. Development analysis of turbine-based variable cycle combined power control technology[J]. Journal of Propulsion Technology, 2023, 44(11):2203092. DOI:10.13675/j.cnki.tjjs.2203092.(in Chinese)
[5] 王欣欣,张苏佳.涡轮基组合循环发动机的发展现状及关键技术浅析[J].中国航天, 2021(2):58-61. WANG X X, ZHANG S J. Development status and key technologies analysis of TBCC engine[J]. Aerospace China, 2021(2):58-61.(in Chinese)
[6] 孙启荣.组合动力技术比较及TBCC关键技术展望[J].科技视界, 2021(10):50-52. DOI:10.19694/j.cnki.issn2095-2457.2021.10.15.SUN Q R. Comparison of combined power technology and prospect of TBCC key technology[J]. Science&Technology Vision, 2021(10):50-52. DOI:10.19694/j.cnki.issn2095-2457.2021.10.15.(in Chinese)
[7] 彭小波.组合循环动力技术在天地往返领域的发展与应用[J].导弹与航天运载技术, 2013(1):78-82. PENG X B. Development of combined cycle propulsion technology in reusable launch vehicle[J]. Missiles and Space Vehicles, 2013(1):78-82.(in Chinese)
[8] MCCONNAUGHEY P K, FEMMININEO M G, KOELFGEN S J, et al. NASA's launch propulsion systems technology roadmap[R]. Washington, D.C.:USA. NASA, 2012.
[9] 张升升,郑雄,吕雅,等.国外组合循环动力技术研究进展[J].科技导报, 2020, 38(12):33-53. ZHANG S S, ZHENG X, LV Y, et al. Research progress of oversea combined cycle propulsion technology[J]. Science&Technology Review, 2020, 38(12):33-53.(in Chinese)
[10] COLVILLE J, LEWIS M. An aerodynamic redesign of the SR-71 inlet with applications to turbine based combined cycle engines[C]//40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Fort Lauderdale, USA:AIAA, 2004:3481.
[11] CORDA S, NEAL B A, MOES T R, et al. Flight testing the linear aerospike SR-71 experiment (LASRE):NASA/TM-1998-206567[R].Hanover:NASA, 1998.
[12] BARTOLOTTA P A, MCNELIS N B, SHAFER D G. High speed turbines:Development of a turbine accelerator (RTA) for space access:AIAA-2003-6943[R]. Virginia, USA:AIAA, 2003.
[13] BULMAN M, SIEBENHAAR A. Combined cycle propulsion:Aerojet innovations for practical hypersonic vehicles[C]//17th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. San Francisco, USA:AIAA, 2011:2397.
[14] WALKER S, TANG M, MORRIS S, et al. Falcon HTV-3X-a reusable hypersonic test bed[C]//15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Dayton, USA:AIAA, 2008:2544.
[15] MIYAGI H, MIYAGAWA H, MONJI T, et al. Combined cycle engine research in Japanese HYPR project[C]//31st Joint Propulsion Conference and Exhibit. San Diego, USA:AIAA, 1995:2751.
[16] MIYAGI H, KIMURA H, CABE J, et al. Combined cycle engine research in Japanese HYPR program[C]//34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Cleveland, USA:AIAA, 1998:3278.
[17] STEELANT J. Achievements obtained for sustained hypersonic flight within the LAPCAT project[C]//15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Dayton, USA:AIAA, 2008:2578.
[18] STEELANT J, VARVILL R, WALTON C, et al. Achievements obtained for sustained hypersonic flight within the LAPCAT-II project[C]//20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Glasgow, Scotland:AIAA, 2015:3677.
[19] 赵钰琦. TBCC发动机的建模与过渡段性能优化[D].哈尔滨:哈尔滨工业大学, 2014. ZHAO Y Q. Mathematic model and performance optimization in the transition section fro turbine based combined cycle engine[D]. Harbin:Harbin Institute of Technology, 2014.(in Chinese)
[20] 江晨钟. TBCC推进系统与飞行器耦合建模及特性分析[D].哈尔滨:哈尔滨工业大学, 2017. JIANG C Z. The coupled modeling and characteristics analisis of tbcc propulsion system and aerocraft[D]. Harbin:Harbin Institute of Technology, 2017.(in Chinese)
[21] 李龙. TBCC推进系统总体性能建模与工作特性分析[D].南京:南京航空航天大学, 2008. LI L. Performance mathematic model and operation characteristic analysis for turbine based combined cycle engine[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2008.(in Chinese)
[22] 尹朝林.外并联式TBCC组合发动机的建模与特性分析[D].哈尔滨:哈尔滨工业大学, 2016. YIN C L. The modeling and characteristicsanalisis of over/under TBCC[D]. Harbin:Harbin Institute of Technology, 2016.(in Chinese)
[23] 张建东. TBCC发动机进气系统设计技术研究[D].西安:西北工业大学, 2007. ZHANG J D. Research on design technology of TBCC intake system[D]. Xi'an:Northwestern Polytechnical University, 2007.(in Chinese)
[24] 倪凯捷. TBCC可调二元进气道设计方法研究[D].南京:南京理工大学, 2017. NI K J. Research on TBCC adjustable binary inlet design method[D]. Nanjing:Nanjing University of Science&Technology, 2017.(in Chinese)
[25] 闵浩. TBCC可调高超声速内转进气道设计方法研究[D].南京:南京理工大学, 2018. MIN H. Research on the design method of TBCC adjustable hypersonic internal rotor inlet[D]. Nanjing:Nanjing University of Science and Technology, 2018.(in Chinese)
[26] 刘君.并联型TBCC进气道模态转换过程气动特性及流动机理[D].南京:南京航空航天大学, 2020. DOI:10.27239/d.cnki.gnhhu.2020.002529.LIU J. Aerodynamic and fluid dynamics investigation of inlet mode transition for turbine based combined cycle propulsion system[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2020. DOI:10.27239/d.cnki.gnhhu.2020.002529.(in Chinese)
[27] 邬林科.宽域TBCC可调组合进气道设计方法及气动特性研究[D].哈尔滨:哈尔滨工业大学, 2020. DOI:10.27061/d.cnki.ghgdu.2020.004296.WU L K. Research on design and aerodynamic characteristics of wide-range TBCC variable combined inlet[D]. Harbin:Harbin Institute of Technology, 2020. DOI:10.27061/d.cnki.ghgdu.2020.004296.(in Chinese)
[28] 乐婷.内并联TBCC进气道变几何设计及气动性能研究[D].南京:南京航空航天大学, 2019. DOI:10.27239/d.cnki.gnhhu.2019.000117.YUE T. Variable geometry design andaerodynamic performance research of TBCC inlet[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2019. DOI:10.27239/d.cnki.gnhhu.2019.000117.(in Chinese)
[29] 何墨凡.内转式TBCC进气道气动设计与分析[D].南京:南京航空航天大学, 2020. DOI:10.27239/d.cnki.gnhhu.2020.001136.HE M F. Aerodynamic design and analysis of TBCC inward-turning inlet[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2020. DOI:10.27239/d.cnki.gnhhu.2020.001136.(in Chinese)
[30] 蒲永彬.一体化二元变几何进气道设计及气动性能研究[D].南京:南京航空航天大学, 2018. PU Y B. Variable geometry design and aerodynamic performance research of integrated two-dimensional inlet[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2018.(in Chinese)
[31] 曹石彬.外并联型TBCC进气道模态转换特性研究[D].哈尔滨:哈尔滨工业大学, 2016. CAO S B. Investigation of over/under TBCC inlet mode transition characteristics[D]. Harbin:Harbin Institute of Technology, 2016.(in Chinese)
[32] 唐伟员.用于内并联TBCC的变几何二元式进气道设计及气动研究[D].南京:南京航空航天大学, 2016. TANG W Y. Aerodynamic design and study of a variable geometry two-dimensional inlet used in inner shunt-wound turbine based combined cycle[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2016.(in Chinese)
[33] 吕郑. Ma0-6并联式TBCC排气系统的设计及性能研究[D].南京:南京航空航天大学, 2019. DOI:10.27239/d.cnki.gnhhu.2019.002012.LÜ Z. Research on design and performance of Ma0-6 over-under TBCC exhaust system[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2019. DOI:10.27239/d.cnki.gnhhu.2019.002012.(in Chinese)
[34] 汪丰. Ma0-7并联式TBCC排气系统设计与性能研究[D].南京:南京航空航天大学, 2018. DOI:10.27239/d.cnki.gnhhu.2019.000418.WANG F. Design and performance study of a Ma0-7 over-under TBCC exhaust system[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2018. DOI:10.27239/d.cnki.gnhhu.2019.000418.(in Chinese)
[35] 李超.并联式TBCC排气系统的气动设计、性能研究及初步优化[D].南京:南京航空航天大学, 2008. LI C. Aerodynamic scheme designing, performance analysis and preliminary optimization of over/under TBCC exhaust system[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2008.(in Chinese)
[36] 彭波.并联式TBCC排气系统优化设计及性能研究[D].南京:南京航空航天大学, 2021. DOI:10.27239/d.cnki.gnhhu.2021.000696.PENG B. Optimization design and performance study of parallel TBCC exhaust system[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2021. DOI:10.27239/d.cnki.gnhhu.2021.000696.(in Chinese)
[37] 周唯阳.串联布局TBCC可调喷管的设计、仿真与实验研究[D].南京:南京航空航天大学, 2012. ZHOU W Y. Computational and experimental study on avariable nozzle for TBCC with tandem layout[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2012.(in Chinese)
[38] 李恒.基于TBCC飞推一体化计力体系研究[D].南京:南京航空航天大学, 2021. DOI:10.27239/d.cnki.gnhhu.2021.001119.LI H. Research on force accounting of the airframe integrated propulsion system based on TBCC[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2021. DOI:10.27239/d.cnki.gnhhu.2021.001119.(in Chinese)
[39] 伍谦.串联式TBCC发动机建模与控制方法研究[D].南京:南京航空航天大学, 2018. WU Q. Research on modeling and control of Co-axial turbine-based combined cycle engine[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2018.(in Chinese)
[40] 冯海龙.串联式TBCC发动机模式转换控制方法研究[D].南京:南京航空航天大学, 2020. DOI:10.27239/d.cnki.gnhhu.2020.000861.FENG H L. Research on mode transition control of tandem turbine based combined cycle engine[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2020. DOI:10.27239/d.cnki.gnhhu.2020.000861.(in Chinese)
[41] 桂丰.高超声速飞行器飞推一体化气动性能与优化研究[D].南京:南京航空航天大学, 2013. GUI F. Research on airframe/propulsion integrated aerodynamic performance and optimization for hypersonic vehicle[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2013.(in Chinese)
[42] 吴琼.高超声速飞行器飞推一体气动设计改进研究[D].南京:南京航空航天大学, 2019. DOI:10.27239/d.cnki.gnhhu.2019.000594.WU Q. The improvement research on the aerodynamic design of hypersonic vehicle/propulsion integration[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2019. DOI:10.27239/d.cnki.gnhhu.2019.000594.(in Chinese)
[43] 韦宝禧,凌文辉,冮强,等. TRRE发动机关键技术分析及推进性能探索研究[J].推进技术, 2017, 38(2):298-305. DOI:10.13675/j.cnki.tjjs.2017.02.008.WEI B X, LING W H, GANG Q, et al. Analysis of key technologies and propulsion performance research of TRRE engine[J]. Journal of Propulsion Technology, 2017, 38(2):298-305. DOI:10.13675/j.cnki.tjjs.2017.02.008.(in Chinese)
[44] 赵俊杰,徐惊雷.基于CFD/CSD的TRRE排气系统气-热耦合分析[J].机械制造与自动化, 2022, 51(2):103-106. DOI:10.19344/j.cnki.issn1671-5276.2022.02.028.ZHAO J J, XU J L. Fluid-thermal coupling analysis based on CFD/CSD of TRRE exhaust system[J]. Machine Building&Automation, 2022, 51(2):103-106. DOI:10.19344/j.cnki.issn1671-5276.2022.02.028.(in Chinese)
[45] 西北工业大学"飞天一号"火箭冲压组合动力飞行试验圆满成功[J].陕西教育(高教), 2022(9):9. Northwestern Polytechnical University "Feitian One" rocket stamping combination power flight test was successful[J]. Shaanxi Education, 2022(9):9.(in Chinese)
[46] MARU Y, TANATSUGU N, SATO T, et al. Multi-row disk arrangement concept for spike of axisymmetric air inlet[C]//40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Fort Lauderdale, USA:AIAA, 2004:3407.
[47] ALBERTSON C, EMAMI S, TREXLER C. Mach 4 test results of a dual-flowpath, turbine based combined cycle inlet[C]//14th AIAA/AHI Space Planes and Hypersonic Systems and Technologies Conference. Canberra, Australia:AIAA, 2006:8138.
[48] MALO-MOLINA F, GAITONDE D, KUTSCHENREUTER P. Numerical investigation of an innovative inward turning inlet[C]//17th AIAA Computational Fluid Dynamics Conference. Toronto, Canada:AIAA, 2005:4871.
[49] SMART M, TREXLER C. Mach 4 performance of a fixed-geometry hypersonic inlet with rectangular-to-elliptical shape transition[C]//41st Aerospace Sciences Meeting and Exhibit. Reno, Nevada:AIAA, 2003.
[50] SMART M, WHITE J. Computational investigation of the performance and back-pressure limits of a hypersonic inlet[C]//40th AIAA Aerospace Sciences Meeting&Exhibit. Reno, USA:AIAA, 2002:508.
[51] UNGEWITTER R, OTT J, DASH S. Advanced modeling methods for hypersonic scramjet evaluation[C]//42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference&Exhibit. Sacramento, USA:AIAA, 2006:4578.
[52] TAGUCHI H, FUTAMURA H, SHIMODAIRA K, et al. Design study on hypersonic engine components for TBCC space planes[C]//12th AIAA International Space Planes and Hypersonic Systems and Technologies. Norfolk, USA:AIAA, 2003:7006.
[53] OKAI K, TAGUCHI H, KOJIMA T, et al. Numerical analysis of variable intake and nozzle for hypersonic engines[C]//12th AIAA International Space Planes and Hypersonic Systems and Technologies. Norfolk, USA:AIAA, 2003:7069.
[54] LEDERER R, SCHWAB R, VOSS N. Hypersonic airbreathing propulsion activities for Saenger[C]//3rd International Aerospace Planes Conference. Orlando, USA:AIAA, 1991:5040.
[55] SCHABER R, SCHWAB R, VOSS N. Hypersonic propulsion considerations for a flying testbed[C]//27th Joint Propulsion Conference. Sacramento, USA:AIAA, 1991:2492.
[56] BERENS T. Experimental and numerical analysis of a two-duct nozzle/afterbody model at supersonic mach numbers[C]//International Aerospace Planes and Hypersonics Technologies. Chattanooga, USA:AIAA, 1995:6085.
[57] GAMBLE E, HAID D. Improving off-design nozzle performance using fluidic injection[C]//42nd AIAA Aerospace Sciences Meeting and Exhibit. Reno, USA:AIAA, 2004:1206.
[58] GAMBLE E, HAID D, D'ALESSANDRO S. Hydraulic and kinematic system model for TBCC dynamic Simulation[C]//46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference&Exhibit. Nashville, USA:AIAA, 2010:6641.
[59] LEDERER R. Testing the actively cooled, fully variable hypersonic demonstrator nozzle-results from the test campaign 1995/96[C]//Space Plane and Hypersonic Systems and Technology Conference. Norfolk, USA:AIAA, 1996:4550.
[60] 张留欢,徐惊雷,莫建伟.二元非对称喷管可调方案试验研究[J].航空学报, 2013, 34(4):772-778. ZHANG L H, XU J L, MO J W. Experimental study of 2D adjustable asymmetric nozzles[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(4):772-778.(in Chinese)
[61] YUNGSTER S, TREFNY C. Computational study of single-expansion-ramp nozzles with external burning[C]//32nd Aerospace Sciences Meeting and Exhibit. Reno, USA:AIAA, 1994:24.
[62] ASBURY S, GUNTHER C, HUNTER C. A passive cavity concept for improving the off-design performance of fixed-geometry exhaust nozzles[C]//32nd Joint Propulsion Conference and Exhibit. Lake Buena Vista, USA:AIAA, 1996:2541.
[63] GRØNLAND T A, BERENS T. Nozzle/afterbody integration of hypersonic vehicles by means of secondary air injection[C]//6th International Aerospace Planes and Hypersonics Technologies. Chattanooga, USA:AIAA, 1995.
[64] STUEBER T J, VRNAK D R, LE D K, et al. Control activity in support of NASA turbine based combined cycle (TBCC) research[R]. LKa Jolla, USA:NASA, 2010.
[65] OUZTS P. Mode transition design considerations for an airbreathing combined-cycle hypersonic vehicle[C]//15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Dayton, USA:AIAA, 2008:2621.
[66] MIN C, HAILONG T, ZHILI Z. Goal programming for stable mode transition in tandem turbo-ramjet engines[J]. Chinese Journal of Aeronautics, 2009, 22(5):486-492.
[67] CHEN M, JIA Z H, TANG H L. Research on integrated design of multi-variable combination adjusting laws of inlet/TBCC engine[J]. Energy Procedia, 2019, 158:1598-1605.
[68] QIU X J, SU W S, TANG Y T. The mode switch control research of small-type parallel TBCC engine based on SQP method[C]//AIAA Modeling and Simulation Technologies Conference. Dallas, USA:AIAA, 2015:2656.
[69] 聂聆聪,李岩,戴冬红,等.涡轮冲压组合发动机模态转换多变量控制研究[J].推进技术, 2017, 38(5):968-974. DOI:10.13675/j.cnki.tjjs.2017.05.002.NIE L C, LI Y, DAI D H, et al. Study on mode transition multi-variable control for turbine-based combined cycle engine[J]. Journal of Propulsion Technology, 2017, 38(5):968-974. DOI:10.13675/j.cnki.tjjs.2017.05.002.(in Chinese)
[70] 廉筱纯,吴虎.航空发动机原理[M].西安:西北工业大学出版社, 2005. LIAN X C, WU H. Principle of aeroengine[M]. Xi'an:Northwestern Polytechnical University Press, 2005.(in Chinese)
[71] 李韦康,张乐临,申丽艳,等.预冷涡轮组合发动机循环及其关键技术研究综述[J/OL].航空发动机, 2024:1-16.[2024-04-23]. http://kns.cnki.net/kcms/detail/21.1359.V.20240322.1235.002.html. LI W K, ZHANG L L, SHEN L Y, et al. Summary of research on precooled turbine combined engine cycle and its key technologies[J/OL]. Aeroengine, 2024:1-16.[2024-04-23]. http://kns.cnki.net/kcms/detail/21.1359.V.20240322.1235.002.html.(in Chinese)
[72] 焦帅祥.低阻高效空气预冷器设计优化与性能研究[D].长沙:国防科技大学, 2021. DOI:10.27052/d.cnki.gzjgu.2021.000926.JIAO S X. Optimization and performance research of low-resistance and high-efficiency air precooler[D]. Changsha:National University of Defense Technology, 2021. DOI:10.27052/,dcnki.Gzjgu.2021.000926.(in Chinese)
[73] 李帅,马同玲,刘洪涛,等. SABRE预冷器结构参数对其性能影响的数值分析[J].推进技术, 2022, 43(4):200818. DOI:10.13675/j.cnki.tjjs.200818.LI S, MA T L, LIU H T, et al. Numerical analysis of effects of pre-cooler structure parameter on its performance in SABRE[J]. Journal of Propulsion Technology, 2022, 43(4):200818. DOI:10.13675/j.cnki.tjjs.200818.(in Chinese)
[74] 徐东君,廉洁,南向谊,等.复合印刷电路板式预冷器的热力设计与优化[J].火箭推进, 2022, 48(6):59-68. XU D J, LIAN J, NAN X Y, et al. Thermal design and optimization of hybrid printed circuit precooler[J]. Journal of Rocket Propulsion, 2022, 48(6):59-68.(in Chinese)
[75] LIN A Q, ZHOU J, FAWZY H, et al. Evaluation of mass injection cooling on flow and heat transfer characteristics for high-temperature inlet air in a MIPCC engine[J]. International Journal of Heat and Mass Transfer, 2019, 135:620-630.
[76] MING L L, WU Y D, YANG Z Y, et al. Numerical study on the influence of mist-air mixtures on axial compressor performance[J]. Aerospace Science and Technology, 2022, 123:107505.
[77] NOVELO D A B, IGIE U, PRAKASH V, et al. Experimental investigation of gas turbine compressor water injection for NO_x emission reductions[J]. Energy, 2019, 176:235-248.
[78] 林阿强,郑群,张海,等.射流冷却对航空发动机压气机的特性分析[J].哈尔滨工程大学学报, 2019, 40(9):1608-1615.LIN A Q, ZHENG Q, ZHANG H, et al. Analysis of mass injection cooling on aero-engine compressor characteristics[J]. Journal of Harbin Engineering University, 2019, 40(9):1608-1615.(in Chinese)
[79] 刘旭峰,常鸿雯,薛洪科,等.射流预冷装置温降与流阻特性试验研究[J].航空发动机, 2018, 44(2):81-86. DOI:10.13477/j.cnki.aeroengine.2018.02.014.LIU X F, CHANG H W, XUE H K, et al. Investigation on temperature drop and flow resistance characteristics of mass injection pre-compressor cooling device[J]. Aeroengine, 2018, 44(2):81-86. DOI:10.13477/j.cnki.aeroengine.2018.02.014.(in Chinese)
[80] 郭建忠,蒋妮,程新荣,等.空天动力新型高性能燃料发展趋势及建议[J].空天技术, 2023(3):79-87. DOI:10.16338/j.issn.2097-0714.20220625.GUO J Z, JIANG N, CHENG X R, et al. Development trend and suggestion of new high performance fuel for aerospace propulsion[J]. Aerospace Technology, 2023(3):79-87. DOI:10.16338/j.issn.2097-0714.20220625.(in Chinese)
[81] 王赛,方建华,吴江,等.高能量密度燃料的合成及研究进展[J].当代化工, 2022, 51(3):691-696, 702. DOI:10.13840/j.cnki.cn21-1457/tq.2022.03.028.WANG S, FANG J H, WU J, et al. Synthesis and research progress of high energy density fuel[J]. Contemporary Chemical Industry, 2022, 51(3):691-696, 702. DOI:10.13840/j.cnki.cn21-1457/tq.2022.03.028.(in Chinese)
[82] HANK J, MURPHY J, MUTZMAN R. The X-51A scramjet engine flight demonstration program[C]//15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Dayton, USA:AIAA, 2008:2540.
[83] NIE J R, JIA T H, PAN L, et al. Development of high-energy-density liquid aerospace fuel:A perspective[J]. Transactions of Tianjin University, 2022, 28(1):1-5.
[84] BALSTER L M, CORPORAN E, DEWITT M J, et al. Development of an advanced, thermally stable, coal-based jet fuel[J]. Fuel Processing Technology, 2008, 89(4):364-378.
[85] HUANG B, SHRESTHA U, DAVIS R J, et al. Endothermic pyrolysis of JP-10 with and without zeolite catalyst for hypersonic applications[J]. AIAA Journal, 2018, 56(4):1616-1626.
[86] 刘小勇,张香文,方文军,等.吸气式发动机燃料研究进展及展望[J].推进技术, 2018, 39(10):2191-2195. DOI:10.13675/j.cnki.tjjs.2018.10.004.LIU X Y, ZHANG X W, FANG W J, et al. Fuel demand and future prospect for air-breathing aerospace engines[J]. Journal of Propulsion Technology, 2018, 39(10):2191-2195. DOI:10.13675/j.cnki.tjjs.2018.10.004.(in Chinese)
[87] CHAVEZ F R, SCHMIDT D K. Analytical aeropropulsive-aeroelastic hypersonic-vehicle model with dynamic analysis[J]. Journal of Guidance, Control, and Dynamics, 1994, 17(6):1308-1319.
[88] BOLENDER M, DOMAN D. A non-linear model for the longitudinal dynamics of a hypersonic air-breathing vehicle[C]//AIAA Guidance, Navigation, and Control Conference and Exhibit. San Francisco, USA:AIAA, 2005:6255.
[89] BOLENDER M A, DOMAN D B. Nonlinear longitudinal dynamical model of an air-breathing hypersonic vehicle[J]. Journal of spacecraft and rockets, 2007, 44(2):374-387.
[90] PARKER J T, SERRANI A, YURKOVICH S, et al. Control-oriented modeling of an air-breathing hypersonic vehicle[J]. Journal of Guidance, Control, and Dynamics, 2007, 30(3):856-869.
[91] BENSON T. Interactive educational tool for turbofan and afterburning turbojet engines[C]//32nd Joint Propulsion Conference and Exhibit. Lake Buena Vista, USA:AIAA, 1996:2561.
[92] BECHTEL R S, OLDS J R. T-BEAT:A conceptual design tool for turbine-based propulsion system analysis[R]. Georgia:Georgia Institute of Technology, 2001.
[93] SUBRAHMANYAM P. Numerical investigation of parametric and off-design performance analysis and simulation for airbreathing engines at hypersonic velocities[C]//44th AIAA Aerospace Sciences Meeting and Exhibit. Reno, USA:AIAA, 2006:220.
[94] YATSUYANAGI N, CHINZEI N, MITANI T, et al. Ramjet engine test facility (RJTF) in NAL-KRC, Japan[C]//8th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Norfolk, USA:AIAA, 1998:1511.
[95] 钟萍,陈丽艳,王颖.国外高超声速技术焦点领域及相关设备改造综述[J].飞航导弹, 2011(10):17-22. DOI:10.16338/j.issn.1009-1319.2011.10.013.ZHONG P, CHEN L Y, WANG Y. Overview of the focus areas of hypersonic technology and related equipment transformation in foreign countries[J]. Aerodynamic Missile Journal, 2011(10):17-22. DOI:10.16338/j.issn.1009-1319.2011.10.013.(in Chinese)