Please wait a minute...
 首页  期刊介绍 期刊订阅 联系我们 横山亮次奖 百年刊庆
 
最新录用  |  预出版  |  当期目录  |  过刊浏览  |  阅读排行  |  下载排行  |  引用排行  |  横山亮次奖  |  百年刊庆
清华大学学报(自然科学版)  2015, Vol. 55 Issue (1): 141-144    
  本期目录 | 过刊浏览 | 高级检索 |
利用约束方程法计算ITER中GDC电极所受的电磁力
郝丽1(),潘宇东2,李波2,袁建生1
2. 核工业西南物理研究院, 成都 610225
Electromagnetic force calculations for ITER GDC electrodes using constraint equations
Li HAO1(),Yudong PAN2,Bo LI2,Jiansheng YUAN1
1. Department of Electrical Engineering, Tsinghua University,Beijing 100084, China
2. Southwestern Institute of Physics, Chengdu 610225, China
全文: PDF(1237 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 

针对位于国际热核聚变试验堆(ITER)装置上端口的直流辉光放电清洗(GDC)电极的概念设计模型,该文利用ANSYS APDL语言对GDC电极在等离子体破裂过程中所受的电磁力进行了计算分析。在ITER有限元整体模型的基础上,将电极嵌入整体模型,采用在相应接触面上建立约束方程的方法,使局部和整体模型相耦合,实现了ITER装置在等离子体破裂事件下的三维暂态电磁场有限元计算,得到了GDC电极中的感应电流分布及其所受的电磁力,计算结果为ITER GDC电极概念设计提供了参考。

服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
关键词 国际热核聚变试验堆(ITER)暂态电磁场电磁力    
Abstract

Safety performance assessments are very important for the ITER (International Thermonuclear Experimental Reactor) GDC (glow discharge conditioning) conceptual design. This paper introduces a force analysis of the ITER GDC electrode using ANSYS APDL. The electrode model is imported into the original ITER finite element model. The partial and global models are coupled by the model processing and constraint equations are generated for the contact surfaces. The method is then used for three-dimensional transient electromagnetic field computations with plasma disruption. The predicted electromagnetic force on the electrode support for the ITER GDC structural analysis.

Key wordsInternational Thermonuclear Experimental Reactor (ITER)    transient electromagnetic field    electromagnetic force
收稿日期: 2013-07-27      出版日期: 2015-05-15
基金资助:国家自然科学基金资助项目(51177075)
引用本文:   
郝丽,潘宇东,李波,袁建生. 利用约束方程法计算ITER中GDC电极所受的电磁力[J]. 清华大学学报(自然科学版), 2015, 55(1): 141-144.
Li HAO,Yudong PAN,Bo LI,Jiansheng YUAN. Electromagnetic force calculations for ITER GDC electrodes using constraint equations. Journal of Tsinghua University(Science and Technology), 2015, 55(1): 141-144.
链接本文:  
http://jst.tsinghuajournals.com/CN/  或          http://jst.tsinghuajournals.com/CN/Y2015/V55/I1/141
  电极模型及其在整体模型中的位置
  电极网格图
  PartVNew模型
  LeftV模型
  路径示意
  约束和粘结2种方法的B值计算结果对比
  10.867s时电极的电流密度矢量图
  GDC电极所受的合力
[1] 石秉仁. 磁约束聚变原理与实践 [M]. 北京: 原子能出版社, 1999. SHI Bingren. Principles and Practice of Magnetic Confinement Fusion [M]. Beijing: Atomic Energy Press, 1999.(in Chinese)
[2] 万元熙. 磁约束核聚变-托卡马克及关键技术 [R]. 合肥: 中科院等离子体物理研究所, 2008. WAN Yuanxi. Magnetic Fusion-Tokamak Constraints and Key Technology [R]. Hefei: Plasma Physics Institute of Chinese Academy of Sciences, 2008. (in Chinese).
[3] Roccella M, Gasparotto M, Lattanzi D. Detailed electromagnetic analyses of the ITER in-vessel components during plasma disruptions[J]. Fusion Engineering, 1997, 1: 349-352
[4] 康伟山, 谌继明, 吴继红, 等. 垂直位移事故中ITER屏蔽包层的电磁场分析[J]. 核聚变与等离子体物理, 2010, 30(3): 261-266. KANG Weishan, CHEN Jiming, WU Jihong, et al.Electromagnetic analysis of ITER shield blanket under VDE[J]. Nuclear Fusion and Plasma Physics. 2010, 30(3): 261-266. (in Chinese)
[5] 李加宏, 胡建生, 王小明, 等. EAST超导托卡马克装置真空室壁处理的研究[J]. 物理学报, 2012, 61(20): 47-50. LI Jiahong, HU Jiansheng, WANG Xiaoming, et al.Wall cleaning fot pre-treatment on EAST[J]. Acta Physica Sinica. 2012, 61(20): 47-50. (in Chinese)
[6] 袁涛, 冯开明. 中国ITER固态试验包层模块第一壁结构优化[J] . 核聚变与等离子体物理, 2007, 27(4): 312-314. YUAN Tao, FENG Kaiming. Optimization design of firstwall structure of Chinese TBM for ITER solid breeder blanket[J]. Nuclear Fusion and Plasma Physics, 2007, 27(4): 312-314. (in Chinese)
[7] 周涛, 刘梦影, 廖航涛, 等. 聚变堆实验包层模块第一壁传热结构优化分析[J]. 中国电机工程学报, 2012, 32(26): 91-95. ZHOU Tao, LIU Mengying, LIAO Hangtao, et al.Heat transfer structure optimization analysis for the first-wall of fusion power reactor[J]. Proceedings of the CSEE, 2012, 32(26): 91-95. (in Chinese)
[8] 朱以文, 徐晗, 蔡元奇. 交界面非协调网格连结的新约束方程法[J]. 武汉大学学报, 2003, 36(6): 47-50. ZHU Yiwen, XU Han, CAI Yuanqi. A new constraint equation algorithm for interface non-conforming mesh gluing[J]. Engineering Journal of Wuhan Universi, 2003, 36(6): 47-50. (in Chinese)
[9] Quiroz L, Beckers P. Non-conforming mesh gluing in the finite element method[J]. International Journal for Numerical Methods in Engineering, 1995, 38(13): 2134-2165.
[10] Sellitto A, Borrell R, Caputo F, et al.Methodological approaches for kinematic coupling of non-matching finite element meshes[J]. Procedia Engineering, 2011, 10: 421-426.
[11] Bavestrello H, Avery P, Farhat C. Incorporation of linear multipoint constraints in domain-decomposition-based iterative solvers Part II: Blending FETI-DP and mortar methods and assembling floating substructures[J]. Computer Methods in Applied Mechanics and Engineering, 2007, 196(8): 1346-1368.
[12] Neugebauer R, Scheffler C, Wabner M. Implementation of control elements in FEM calculations of machine tools[J]. CIRP Journal of Manufacturing Science and Technology, 2011, 4(1): 71-79.
No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 《清华大学学报(自然科学版)》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn