[1] JACKSON T A, EKLUND D R, FINK A J. High speed propulsion:Performance advantage of advanced materials[J]. Journal of Materials Science, 2004, 39(19):5905-5913.
[2] SUTTON G P, BIBLARZ O. Rocket propulsion elements[M]. 9th ed. New Jersey:John Wiley & Sons, 2017.
[3] POLEZHAEV Y V. Will there or will there not be a hypersonic airplane?[J]. Journal of Engineering Physics and Thermophysics, 2000, 73(1):3-8.
[4] DUWEZ P, WHEELER JR H L. Experimental study of cooling by injection of a fluid through a porous material[J]. Journal of the Aeronautical Sciences, 1948, 15(9):509-521.
[5] HUANG Z, ZHU Y H, JIANG P X, et al. Investigation of a porous transpiration-cooled strut injector[J]. Journal of Propulsion and Power, 2015, 31(1):278-285.
[6] GLASS D E, DILLEY A D, KELLY H N. Numerical analysis of convection/transpiration cooling[J]. Journal of Spacecraft and Rockets, 2001, 38(1):15-20.
[7] KUNTZ R J, BLUBAUGH A L, LABOTZ R J, et al. Transpiration-cooled devices:3585800[P]. 1971-06-22.
[8] 刘伟强, 陈启智, 吴宝元. 典型结构的层板发汗冷却推力室传热特性的推算方法[J]. 推进技术, 1998, 19(6):15-19. LIU W Q, CHEN Q Z, WU B Y. Calculation method of heat transfer in platelet transpiration cooled thrust with typical structure[J]. Journal of Propulsion Technology, 1998, 19(6):15-19. (in Chinese)
[9] 丁亮. 烧结多孔介质材料发汗冷却的研究[D]. 合肥:中国科学技术大学, 2012. DING L. Investigation on transpiration cooling within sintered porous material[D]. Hefei:University of Science and Technology of China, 2012. (in Chinese)
[10] LIU Y Q, JIANG P X, XIONG Y B, et al. Experimental and numerical investigation of transpiration cooling for sintered porous flat plates[J]. Applied Thermal Engineering, 2013, 50(1):997-1007.
[11] 熊宴斌. 超声速主流条件发汗冷却的流动和传热机理研究[D]. 北京:清华大学, 2013. XIONG Y B. Study of the mechanism of flow and heat transfer on supersonic transpiration cooling[D]. Beijing:Tsinghua University, 2013. (in Chinese)
[12] ZHU Y H, JIANG P X, SUN J G, et al. Injector head transpiration cooling coupled with combustion in H₂/O₂ subscale thrust chamber[J]. Journal of Thermophysics and Heat Transfer, 2013, 27(1):42-51.
[13] BÖHRK H. Transpiration-cooled hypersonic flight experiment:Setup, flight measurement, and reconstruction[J]. Journal of Spacecraft and Rockets, 2015, 52(3):674-683.
[14] KÖNIG V, ROM M, MVLLER S, et al. Numerical and experimental investigation of transpiration cooling with carbon/carbon characteristic outflow distributions[J]. Journal of Thermophysics and Heat Transfer, 2019, 33(2):449-461.
[15] PROKEIN D, VON WOLFERSDORF J, BOEHRK H. Analysis of anisotropy effects for transpiration cooled CMC leading edges using OpenFOAM[C]//20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Glasgow, Scotland:AIAA, 2015.
[16] VAN FOREEST A, SIPPEL M, GVLHAN A, et al. Transpiration cooling using liquid water[J]. Journal of Thermophysics and Heat Transfer, 2009, 23(4):693-702.
[17] HUANG G, ZHU Y H, LIAO Z Y, et al. Experimental investigation of transpiration cooling with phase change for sintered porous plates[J]. International Journal of Heat and Mass Transfer, 2017, 114:1201-1213.
[18] WANG J H, ZHAO L J, WANG X C, et al. An experimental investigation on transpiration cooling of wedge shaped nose cone with liquid coolant[J]. International Journal of Heat and Mass Transfer, 2014, 75:442-449.
[19] 黄干, 廖致远, 祝银海, 等. 高温主流条件下相变发汗冷却实验研究[J]. 工程热物理学报, 2017, 38(4):817-821. HUANG G, LIAO Z Y, ZHU Y H, et al. Experimental investigation of transpiration cooling with phase change in high temperature flow[J]. Journal of Engineering Thermophysics, 2017, 38(4):817-821. (in Chinese)
[20] 孟丽燕, 姜培学, 余磊, 等. 发汗冷却中流动与换热的数值模拟[J]. 工程热物理学报, 2002, 23(5):593-595. MENG L Y, JIANG P X, YU L, et al. Numerical simulation of fluid flow and heat transfer in transpiration cooling[J]. Journal of Engineering Thermophysics, 2002, 23(5):593-595. (in Chinese)
[21] 姜培学, 余磊, 任泽霈. 变物性与热辐射对发汗冷却过程的影响规律研究[J]. 航空动力学报, 2004, 19(2):184-190. JIANG P X, YU L, REN Z P. Influence of variable thermophysical properties and thermal radiation on convection heat transfer in transpiration cooling[J]. Journal of Aerospace Power, 2004, 19(2):184-190. (in Chinese)
[22] 余磊, 姜培学, 任泽霈. 发汗冷却换热过程的实验研究与数值模拟[J]. 工程热物理学报, 2005, 26(1):95-97. YU L, JIANG P X, REN Z P. Experimental investigation and numerical simulation of convection heat transfer in transpiration cooling[J]. Journal of Engineering Thermophysics, 2005, 26(1):95-97. (in Chinese)
[23] 孟丽燕, 姜培学, 蒋方帅, 等. 烧结多孔壁面发汗冷却换热的实验研究[J]. 清华大学学报(自然科学版), 2005, 45(11):1537-1539. MENG L Y, JIANG P X, JIANG F S, et al. Experimental investigation of the heat transfer for transpiration cooling through a sintered porous plate[J]. Journal of Tsinghua University (Science and Technology), 2005, 45(11):1537-1539. (in Chinese)
[24] 姜培学, 任泽霈, 张左璠, 等. 液体火箭发动机推力室发汗冷却传热过程的数值模拟(I)数理模型[J]. 推进技术, 1999, 20(3):1-4. JIANG P X, REN Z P, ZHANG Z F, et al. Numerical simulation of heat transfer in transpiration cooled liquid rocket thruster chamber (I) physical mathematical model[J]. Journal of Propulsion Technology, 1999, 20(3):1-4. (in Chinese)
[25] 姜培学, 任泽霈, 张左璠, 等. 液体火箭发动机推力室发汗冷却传热过程的数值模拟(II)数值方法与计算结果[J]. 推进技术, 1999, 20(4):17-21. JIANG P X, REN Z P, ZHANG Z F, et al. Numerical simulation of heat transfer in a transpiration cooled liquid rocket thrust chamber (II) numerical method and results[J]. Journal of Propulsion Technology, 1999, 20(4):17-21. (in Chinese)
[26] LIU Y Q, JIANG P X, JIN S S, et al. Transpiration cooling of a nose cone by various foreign gases[J]. International Journal of Heat and Mass Transfer, 2010, 53(23-24):5364-5372.
[27] HUANG Z, ZHU Y H, XIONG Y B, et al. Investigation of supersonic transpiration cooling through sintered metal porous flat plates[J]. Journal of Porous Media, 2015, 18(11):1047-1057.
[28] JIANG P X, LIAO Z Y, HUANG Z, et al. Influence of shock waves on supersonic transpiration cooling[J]. International Journal of Heat and Mass Transfer, 2019, 129:965-974.
[29] SHI J X, WANG J H. A numerical investigation of transpiration cooling with liquid coolant phase change[J]. Transport in Porous Media, 2011, 87(3):703-716.
[30] HE F, WANG J H. Numerical investigation on critical heat flux and coolant volume required for transpiration cooling with phase change[J]. Energy Conversion and Management, 2014, 80:591-597.
[31] 胡皓玮, 胥蕊娜, 姜培学. 多孔介质流动沸腾微观实验研究[J]. 工程热物理学报, 2021, 42(2):424-429. HU H W, XU R N, JIANG P X. Experimental investigation of flow boiling in porous media with micromodels[J]. Journal of Engineering Thermophysics, 2021, 42(2):424-429. (in Chinese)
[32] HU H W, JIANG P X, OUYANG X L, et al. A modified energy equation model for flow boiling in porous media and its application to transpiration cooling at low pressures with transient effect[J]. International Journal of Heat and Mass Transfer, 2020, 158:119745.
[33] DONG W J, WANG J H, CHEN S Y, et al. Modelling and investigation on heat transfer deterioration during transpiration cooling with liquid coolant phase-change[J]. Applied Thermal Engineering, 2018, 128(5):381-392.
[34] WU N, WANG J H, DONG W J, et al. An experimental investigation on combined sublimation and transpiration cooling for sintered porous plates[J]. International Journal of Heat and Mass Transfer, 2018, 116:685-693.
[35] WU N, WANG J H, HE F, et al. An experimental investigation on transpiration cooling of a nose cone model with a gradient porosity layout[J]. Experimental Thermal and Fluid Science, 2019, 106:194-201.
[36] 伍楠. 发散冷却关键问题的实验和数值研究[D]. 合肥:中国科学技术大学, 2019. WU N. Experimental and numerical investigations on the key problems of transpiration cooling[D]. Hefei:University of Science and Technology of China, 2019. (in Chinese)
[37] XIAO X F, ZHAO G B, ZHOU W X. Numerical investigation of transpiration cooling for porous nose cone with liquid coolant[J]. International Journal of Heat and Mass Transfer, 2018, 121:1297-1306.
[38] SU H, WANG J H, HE F, et al. Numerical investigation on transpiration cooling with coolant phase change under hypersonic conditions[J]. International Journal of Heat and Mass Transfer, 2019, 129:480-490.
[39] SHEN L, WANG J H, DONG W J, et al. An experimental investigation on transpiration cooling with phase change under supersonic condition[J]. Applied Thermal Engineering, 2016, 105:549-556.
[40] ZHANG B, HUANG H M, LU X L, et al. Experimental investigation on transpiration cooling for porous ceramic with liquid water[J]. Acta Astronautica, 2020, 167:117-121.
[41] 黄拯. 高温与超音速条件下发汗冷却基础问题研究[D]. 北京:清华大学, 2015. HUANG Z. Research on the transpiration cooling in supersonic and high temperature flow[D]. Beijing:Tsinghua University, 2015. (in Chinese)
[42] 廖致远, 祝银海, 黄干, 等. 超声速主流平板相变发汗冷却实验研究[J]. 推进技术, 2019, 40(5):1058-1064. LIAO Z Y, ZHU Y H, HUANG G, et al. Experimental investigation of transpiration cooling on a porous plate with phase change in supersonic flow tunnel[J]. Journal of Propulsion Technology, 2019, 40(5):1058-1064. (in Chinese)
[43] JIANG P X, HUANG G, ZHU Y H, et al. Experimental investigation of biomimetic self-pumping and self-adaptive transpiration cooling[J]. Bioinspiration & Biomimetics, 2017, 12(5):056002.
[44] HUANG G, LIAO Z Y, XU R N, et al. Self-pumping transpiration cooling with phase change for sintered porous plates[J]. Applied Thermal Engineering, 2019, 159:113870.
[45] HUANG G, ZHU Y H, LIAO Z Y, et al. Experimental investigation of self-pumping internal transpiration cooling[J]. International Journal of Heat and Mass Transfer, 2018, 123:514-522.
[46] HUANG G, LIAO Z Y, XU R N, et al. Self-pumping transpiration cooling with a protective porous armor[J]. Applied Thermal Engineering, 2020, 164:114485.
[47] HUANG G, ZHU Y H, LIAO Z Y, et al. Biomimetic self-pumping transpiration cooling for additive manufactured porous module with tree-like micro-channel[J]. International Journal of Heat and Mass Transfer, 2019, 131:403-410.
[48] 祝银海, 姜培学, 孙纪国, 等. 液体火箭推力室面板发汗冷却与燃烧耦合数值模拟[J]. 工程热物理学报, 2012, 33(1):101-104. ZHU Y H, JIANG P X, SUN J G, et al. Numerical investigation of transpiration cooling coupled with combustion in the thrust chamber of liquid rocket[J]. Journal of Engineering Thermophysics, 2012, 33(1):101-104. (in Chinese)
[49] HUANG G, ZHU Y H, JIANG P X, et al. Investigation of inclined porous transpiration-cooled struts[J]. Journal of Spacecraft and Rockets, 2018, 55(3):660-668.
[50] 金韶山, 姜培学, 孙纪国. 液体火箭发动机喷管发汗冷却研究[J]. 航空动力学报, 2008, 23(7):1334-1340. JIN S S, JIANG P X, SUN J G. Investigation on the transpiration cooling of a liquid rocket nozzle[J]. Journal of Aerospace Power, 2008, 23(7):1334-1340. (in Chinese)
[51] 金韶山, 姜培学, 孙纪国. 发汗冷却喷管多孔壁面的分段设计分析[J]. 航空动力学报, 2008, 23(12):2346-2352. JIN S S, JIANG P X, SUN J G. Analysis of the subsection design of the porous wall of a transpiration cooling nozzle[J]. Journal of Aerospace Power, 2008, 23(12):2346-2352. (in Chinese)
[52] XIONG Y B, ZHU Y H, JIANG P X. Numerical simulation of transpiration cooling for sintered metal porous strut of the scramjet combustion chamber[J]. Heat Transfer Engineering, 2014, 35(6-8):721-729.
[53] JIANG P X, HUANG G, ZHU Y H, et al. Experimental investigation of combined transpiration and film cooling for sintered metal porous struts[J]. International Journal of Heat and Mass Transfer, 2017, 108:232-243.
[54] HUANG G, ZHU Y H, LIAO Z Y, et al. Experimental study on combined cooling method for porous struts in supersonic flow[J]. Journal of Heat Transfer, 2018, 140(2):022201.
[55] HUANG G, ZHU Y H, HUANG Z, et al. Investigation of combined transpiration and opposing jet cooling of sintered metal porous struts[J]. Heat Transfer Engineering, 2018, 39(7-8):711-723.