[1] DAVIS L B, WASHAM R M. Development of a dry low NO_x combustor[C]//ASME 1989 International Gas Turbine and Aeroengine Congress and Exposition. Toronto, Canada:ASME, 1989.
[2] DAVIS L B. Dry low NO_x combustion systems for GE heavy-duty gas turbines[C]//ASME 1989 International Gas Turbine and Aeroengine Congress and Exhibition. Birmingham, USA:ASME, 1996.
[3] VANDERVORT C L. 9 ppm NO_x/CO combustion system for "F" class industrial gas turbines[J]. Journal of Engineering for Gas Turbines and Power, 2001, 123(2):317-321.
[4] TANAKA Y, NOSE M, NAKAO M, et al. Development of low NO_x combustion system with EGR for 1700℃-class gas turbine[J]. Mitsubishi Heavy Industries Technical Review, 2013, 50(1):1-6.
[5] HADA S, TSUKAGOSHI K, MASADA J, et al. Test results of the world's first 1600℃ J-series gas turbine[J]. Mitsubishi Heavy Industries Technical Review, 2012, 49(1):18-23.
[6] LEONARD G, STEGMAIER J. Development of an aeroderivative gas turbine dry low emissions combustion system[J]. Journal of Engineering for Turbines and Power, 1994, 116(3):542-546.
[7] GOH E, SIRIGNANO M, LI J, et al. Prediction of minimum achievable NO_x levels for fuel-staged combustors[J]. Combustion and Flame, 2019, 200:276-285.
[8] U.S. Energy Information Administration. International energy outlook[R]. Washington, DC:U.S. Energy Information Administration, 2019.
[9] 郭磊, 宋文蛰, 王相平, 等. IGCC燃用低热值燃料的燃气轮机运行性能优化[J]. 中国电力, 2019, 52(2):14-19. GUO L, SONG W Z, WANG X P, et al. Performance optimization of the IGCC gas turbine fueled with low heat value syngas[J]. Electric Power, 2019, 52(2):14-19. (in Chinese)
[10] KOBAYASHI H, HAYAKAWA A, SOMARATHNE K D K A, et al. Science and technology of ammonia combustion[J]. Proceedings of the Combustion Institute, 2019, 37(1):109-133.
[11] ROMOSER C E, HARPER J, WILSON M B, et al. E-class late fuel staging technology delivers flexibility leap[C]//ASME Turbo Expo 2016:Turbomachinery Technical Conference and Exposition. Seoul, South Korea:ASME, 2016.
[12] KARIM H, NATARAJAN J, NARRA V, et al. Staged combustion system for improved emissions operability and flexibility for 7HA class heavy duty gas turbine engine[C]//ASME Turbo Expo 2017:Turbomachinery Technical Conference and Exposition. Charlotte, North Carolina, USA:ASME, 2017.
[13] PENNELL D A, BOTHIEN M R, CIANI A, et al. An introduction to the Ansaldo GT36 constant pressure sequential combustor[C]//ASME Turbo Expo 2017:Turbomachinery Technical Conference and Exposition. Charlotte, North Carolina, USA:ASME, 2017.
[14] WINKLER D, GENG W, ENGELBRECHT G, et al. Staged combustion concept for increased operational flexibility of gas turbines[C]//Global Power and Propulsion Society Forum. Zurich, Switzerland:Global Power and Propulsion Society, 2017, 1:184-194.
[15] HOFERICHTER V, AHRENS D, KOLB M, et al. A reactor model for the NO_x formation in a reacting jet in hot cross flow under atmospheric and high pressure conditions[C]//ASME Turbo Expo 2014:Turbine Technical Conference and Exposition. Düsseldorf, Germany:ASME, 2014.
[16] WEINZIERL J, KOLB M, AHRENS D, et al. Large-eddy simulation of a reacting jet in cross flow with NO_x prediction[J]. Journal of Engineering for Gas Turbines and Power, 2017, 139(3):031502.
[17] 钱文凯, 朱民, 李苏辉, 等. 燃气轮机分级燃烧室NO_x排放动力学模拟研究[J]. 动力工程学报, 2019, 39(1):33-40. QIAN W K, ZHU M, LI S H, et al. A kinetics study on NO_x emission of an axially-staged gas turbine combustor[J]. Journal of Chinese Society of Power Engineering, 2019, 39(1):33-40. (in Chinese)
[18] 郑祥龙. 燃料轴向分级燃烧污染物排放及其交叉射流火焰特性研究[D]. 北京:中国科学院大学, 2020. ZHENG X L. Investigations on the pollutant emissions of the axial-fuel-staged combustion and characteristics of the jet-in-crossflow flames[D]. Beijing:University of Chinese Academy of Sciences, 2020. (in Chinese)
[19] SAMULSEN S. Rich burn, quick-mix, lean burn (RQL) combustor, the gas turbine handbook. Section 3. 2. 1. 3. U. S. Department of Energy, National Energy Technology Laboratory, Morgantown, WV, 2006.
[20] MCKINNEY R, CHEUNG A, SOWA W, et al. The Pratt & Whitney TALON X low emissions combustor:Revolutionary results with evolutionary technology[C]//45th AIAA Aerospace Sciences Meeting and Exhibit. Reno, USA:AIAA, 2007.
[21] FEITELBERG A S, LACEY M A. The GE rich-quench-lean gas turbine combustor[J]. Journal of Engineering for Turbines and Power, 1998, 120(3):502-508.
[22] STRAUB D L, CASLETON K H, LEWIS R E, et al. Assessment of rich-burn, quick-mix, lean-burn trapped vortex combustor for stationary gas turbines[J]. Journal of Engineering for Gas Turbines and Power, 2005, 127(1):36-41.
[23] SULLIVAN-LEWIS E, HACK R, MCDONELL V. Performance assessment of a gas fired RQL combustion system operated in a vitiated air stream[C]//48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Atlanta, USA:AIAA, 2012.
[24] LIU H Y, QIAN W K, ZHU M, et al. Kinetics modeling on NO_x emissions of a syngas turbine combustor using rich-burn, quick-mix, lean-burn combustion method[J]. Journal of Engineering for Gas Turbines and Power, 2020, 142(2):021005.
[25] IKI N, KURATA O, MATSUNUMA T, et al. NO_x reduction in a swirl combustor firing ammonia for a micro gas turbine[C]//ASME Turbo Expo 2018:Turbomachinery Technical Conference and Exposition. Oslo, Norway:ASME, 2018.
[26] LI S, ZHANG S, ZHOU H, et al. Analysis of air-staged combustion of NH₃/CH₄ mixture with low NO_x emission at gas turbine conditions in model combustors[J]. Fuel, 2019, 237:50-59.
[27] LI Z X, LI S H. Kinetics modeling of NO_x emissions characteristics of a NH₃/H₂ fueled gas turbine combustor[J]. International Journal of Hydrogen Energy, 2021, 46(5):4526-4537.
[28] YORK W D, ZIMINSKY W S, YILMAZ E. Development and testing of a low NO_x hydrogen combustion system for heavy-duty gas turbines[J]. Journal of Engineering for Gas Turbines and Power, 2013, 135(2):022001.
[29] LEE H, HERNANDEZ S, MCDONELL V, et al. Development of flashback resistant low-emission micro-mixing fuel injector for 100% hydrogen and syngas fuels[C]//ASME Turbo Expo 2009:Power for Land, Sea, and Air. Orlando, USA:ASME, 2009.
[30] HUGHES M J, BERRY J D. Advanced multi-tube mixer combustion for 65% efficiency[C]. U.S. DoE UTSR workshop. Orlando, USA:U.S. DoE, 2019.
[31] HAQUE M A, NEMITALLAH M A, ABDELHAFEZ A, et al. Review of fuel/oxidizer-flexible combustion in gas turbines[J]. Energy & Fuels, 2020, 34(9):10459-10485.
[32] ELKADY A M, EVULET A, BRAND A, et al. Exhaust gas recirculation in DLN F-class gas turbines for post-combustion CO₂ capture[C]//ASME Turbo Expo 2008:Power for Land, Sea, and Air. Berlin, Germany:ASME, 2008.
[33] LI H J, ELKADY A M, EVULET A. Effect of exhaust gas recirculation on NO_x formation in premixed combustion system[C]//47th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition. Orlando, USA:AIAA, 2009.
[34] PFEFFERLE W C, CARRUBBA R V, HECK R M, et al. Catathermal combustion new process for low emissions fuel conversion[C]//ASME-AMER SOC Mechanical Engineering. New York, USA:ASME-AMER, 1976, 98(5):94-95.
[35] SMITH L, ETEMAD S, KARIM H, et al. Catalytic combustion, the gas turbine handbook[M]. Section 3. 2. 2. U.S. Department of Energy, National Energy Technology Laboratory, Morgantown, 2006.
[36] FANT D B, JACKSON G S, KARIM H, et al. Status of catalytic combustion R&D for the department of energy advanced turbine systems program[J]. Journal of Engineering for Gas Turbines and Power, 2000, 122(2):293-300.
[37] YEE D Y, LUNDBERG K, WEAKLEY C K. Field demonstration of a 1.5 MW industrial gas turbine with a low emissions catalytic combustion system[J]. Journal of Engineering for Gas Turbines and Power, 2001, 123(3):550-556.
[38] SMITH L L, KARIM H, CASTALDI M J, et al. Rich-catalytic lean-burn combustion for low-single-digit NO_x gas turbines[J]. Journal of Engineering for Gas Turbines and Power, 2005, 127(1):27-35.
[39] LIEUWEN T, MCDONELL V, SANTAVICCA D, et al. Burner development and operability issues associated with steady flowing syngas fired combustors[J]. Combustion Science and Technology, 2008, 180(6):1169-1192.
[40] CHENG R K. Ultralean low swirl burner:5735681. 1998-04-07.
[41] CHENG R K. Low swirl combustion, the gas turbine handbook[M]. Section 3. 2. 1. 4. 2. U. S. Department of Energy, National Energy Technology Laboratory, Morgantown, WV, 2006.
[42] CHENG R K, LITTLEJOHN D, NAZEER W A, et al. Laboratory studies of the flow field characteristics of low-swirl injectors for adaptation to fuel-flexible turbines[J]. Journal of Engineering for Gas Turbines and Power, 2008, 130(2):021501.
[43] EMADI M, KAUFMAN K, BURKHALTER M W, et al. Examination of thermo-acoustic instability in a low swirl burner[J]. International Journal of Hydrogen Energy, 2012, 40(39):13594-13603.
[44] OCHRYMIUK T, BADUR J. Flameless oxidation at the GT26 gas turbine:Numerical study via full chemistry[J]. Task Quarterly, 2001, 5(2):239-246.
[45] LEVY Y, SHERBAUM V, ARFI P. Basic thermodynamics of FLOXCOM, the low-NO_x gas turbines adiabatic combustor[J]. Applied Thermal Engineering, 2004, 24(11-12):1593-1605.
[46] KRUSE S, KERSCHGENS B, BERGER L, et al. Experimental and numerical study of MILD combustion for gas turbine applications[J]. Applied Energy, 2015, 148:456-465.
[47] PERPIGNAN A A V, RAO A G, ROEKAERTS D J E M. Flameless combustion and its potential towards gas turbines[J]. Progress in Energy and Combustion Science, 2018, 69:28-62.
[48] KHALLAGHI N, HANAK D P, MANOVIC V. Techno-economic evaluation of near-zero CO₂ emission gas-fired power generation technologies:A review[J]. Journal of Natural Gas Science and Engineering, 2020, 74:103095.
[49] SAANUM I, DITARANTO M. Experimental study of oxy-fuel combustion under gas turbine conditions[J]. Energy & Fuels, 2017, 31(4):4445-4451.
[50] LIU C Y, CHEN G, SIPÖCZ N, et al. Characteristics of oxy-fuel combustion in gas turbines[J]. Applied Energy, 2012, 89(1):387-394.
[51] QIAN W K, LIU H Y, ZHU M, et al. Kinetics study of a staged combustor concept for oxy-fuel combustion gas turbine cycles[C]//ASME Turbo Expo 2019:Turbomachinery Technical Conference and Exposition. Phoenix, Arizona, USA:ASME, 2019.
[52] SUNDKVIST S G, DAHLQUIST A, JANCZEWSKI J, et al. Concept for a combustion system in oxy-fuel gas turbine combined cycles[J]. Journal of Engineering for Gas Turbines and Power, 2014, 136(10):101513.
[53] 李苏辉, 钱文凯, 朱民. 一种分级供氧燃烧室及燃气轮机分级供氧燃烧方法:201910492576.7. 2020-10-13. LI S H, QIAN W K, ZHU M. Graded oxygen supply combustion chamber and graded oxygen supply combustion method of combustion gas turbine:201910492576.7. 2020-10-13. (in Chinese)
[54] MCCLUNG A, BRUN K, DELIMONT J. Comparison of supercritical carbon dioxide cycles for oxy-combustion[C]//ASME Turbo Expo 2015:Turbine Technical Conference and Exposition. Montreal, Quebec, Canada:ASME, 2015.
[55] COOGAN S, GAO X, MCCLUNG A, et al. Evaluation of kinetic mechanisms for direct fired supercritical oxy-combustion of natural gas[C]//ASME Turbo Expo 2016:Turbomachinery Technical Conference and Exposition. Seoul, South Korea:ASME, 2016.
[56] DELIMONT J, MCCLUNG A, PORTNOFF M. Direct fired oxy-fuel combustor for sCO₂ power cycles:1 MW scale design and preliminary bench top testing[C]//ASME Turbo Expo 2017:Turbomachinery Technical Conference and Exposition. Charlotte, North Carolina, USA:ASME, 2017.
[57] DELIMONT J, MCCLUNG A, PORTNOFF M. Simulation of a direct fired oxy-fuel combustor for sCO₂ power cycles[C]//The Fifth International Symposium on Supercritical CO₂ Power Cycles. San Antonio, USA:SWRI, 2016, 2:29-31.
[58] DELIMONT J, ANDREWS N, CHORDIA L. Computational modeling of a direct fired oxy-fuel combustor for sCO₂ power cycles[C]//The 6th International Supercritical CO₂ Power Cycles Symposium. Pittsburg, USA:SWRI, 2018, 134:1-11.
[59] STRAKEY P A. Oxy-combustion modeling for direct-fired supercritical CO₂ power cycles[J]. Journal of Energy Resources Technology, 2019, 141(7):070706.
[60] CHOWDHURY A S M A R, BADHAN A, CABRERA L A, et al. Conceptual design of a supercritical oxy-fuel combustor based on LOx/methane rocket engine technologies[C]//14th International Energy Conversion Engineering Conference. Salt Lake City, USA:AIAA, 2016.
[61] MANIKANTACHARI K R V, MARTIN S, VESELY L, et al. A strategy of reactant mixing in methane direct-fired sCO₂ combustors[C]//ASME Turbo Expo 2018:Turbomachinery Technical Conference and Exposition. Oslo, Norway:ASME, 2018.
[62] KARIMI M, OCHS B, LIU Z F, et al. Measurement of methane autoignition delays in carbon dioxide and argon diluents at high pressure conditions[J]. Combustion and Flame, 2019, 204:304-319.
[63] GVLEN S C. Pressure gain combustion advantage in land-based electric power generation[J]. Journal of the Global Power and Propulsion Society, 2017, 1:288-302.
[64] KAILASANATH K. Review of propulsion applications of detonation waves[J]. AIAA Journal, 2000, 38(9):1698-1708.
[65] LU F K, BRAUN E M. Rotating detonation wave propulsion:Experimental challenges, modeling, and engine concepts[J]. Journal of Propulsion and Power, 2014, 30(5):1125-1142.
[66] ANAND V, GUTMARK E. A review of pollutants emissions in various pressure gain combustors[J]. International Journal of Spray and Combustion Dynamics, 2019, 11, doi:10.1177/1756827719870724.
[67] ZHOU R, WU D, WANG J P. Progress of continuously rotating detonation engines[J]. Chinese Journal of Aeronautics, 2016, 29(1):15-29.
[68] WANG B, WANG J P. Introduction to the special section on recent progress on rotating detonation and its application[J]. AIAA Journal, 2020, 58(12):4974-4975.
[69] MA J Z, LUAN M Y, XIA Z J, et al. Recent progress, development trends, and consideration of continuous detonation engines[J]. AIAA Journal, 2020, 58(12):4976-5035.
[70] BOLLAND O, MATHIEU P. Comparison of two CO₂ removal options in combined cycle power plants[J]. Energy Conversion and Management 1998, 39(16-18):1653-1663.
[71] MILCAREK R J, AHN J. Rich-burn, flame-assisted fuel cell, quick-mix, lean-Burn (RFQL) combustor and power generation[J]. Journal of Power Sources, 2018, 381:18-25.