为克服传统计算流体动力学-离散元法(CFD-DEM)中流体网格需为颗粒尺寸数倍的限制, 该文综合考虑相间作用力和颗粒-湍流相互作用, 建立了基于扩散平均算法的全耦合CFD-DEM密集颗粒水力输送模型。经实验验证, 全耦合模型能很好地预测管内两相流动特性。研究了管道倾角对2 mm粗颗粒水力输送特性包括颗粒空间分布、 两相轴向速度、 流体湍动能和压降等的影响。结果表明： 随着倾角增加, 颗粒由偏向管道底部堆积的分布逐渐向近乎均匀的分布转变, 流体轴向速度和湍动能分布先逐渐不对称后恢复对称, 在60°时不对称程度最大; 颗粒-颗粒和颗粒-壁面间碰撞次数均随倾角增加先略微增加后迅速减小; 两相流压降随倾角增加先增加后减小, 在60°时最大。为降低能耗, 输送颗粒应避免使用60°倾斜管, 尽量使用小角度或大角度倾斜管。
Abstract
[Objective] This study proposed a fully coupled computational fluid dynamics-discrete element method (CFD-DEM) model based on a diffusion averaging algorithm for the hydraulic transport of dense particles, integrally considering particle--liquid interphase force and complex particle-turbulence interaction. The proposed model overcame the limitation that fluid mesh needs to be several times the size of the particles in the traditional CFD-DEM model. Moreover, experimental and numerical studies were conducted mainly on horizontal and vertical pipes, and few were conducted on inclined pipes. [Methods] Calculation of particle volume fraction was divided into two steps. First, each particle was randomly and uniformly divided into several feature points, and the initial value of the particle volume fraction was calculated based on the number of feature points occupied in each mesh. Subsequently, a diffusion-based averaging method was employed to solve the particle volume fraction with the initial field and no-flux condition on all physical boundaries in the computational domain. Furthermore, the source terms were added to the k-ε turbulence model to account for the modulation of the turbulence from particles, and the discrete random walk model was used to calculate the stochastic effect of turbulence on particle motion. A drag force considering porosity modification was applied to the two-phase flow through densely packed particle beds. Other particle-liquid forces and particle torques caused by the fluid were also included in the model. The fully coupled CFD-DEM model predicted the hydraulic conveying of dense particles in the pipeline system well. Moreover, this model was used to investigate the effects of pipe inclination on the hydraulic transport of coarse particles (2 mm), including the effects on the spatial distribution of particles, axial velocity of each phase, fluid turbulent kinetic energy, and pressure drop. [Results] The results are summarized as follows: 1) The spatial distribution of particles gradually transformed from a relatively densely packed distribution at the bottom of the horizontal pipe to a nearly uniform distribution in the vertical pipe with increasing inclination angle. The distributions of axial liquid velocity and turbulent kinetic energy along the vertical direction were gradually asymmetric and then returned to symmetry, reaching the maximum degree of asymmetry at 60°. 2) In the inclined pipes, the axial velocity of particles was lower and higher at the bottom and top of the pipe, respectively. Meanwhile, the axial velocity of the particles in the vertical pipe was parabolically distributed, with higher velocity at the center of the pipe and lower velocity near the wall. 3) The number of collisions between particles and between particles and walls increased slightly and then decreased rapidly with increasing inclination angle. 4) Moreover, pressure drop in the two-phase flow initially increased and then decreased with increasing inclination angle, reaching the maximum at 60°. [Conclusions] This study demonstrates that the inclination angle significantly affects the distributions of particles, the number of collisions between particles and between particles and walls, liquid turbulent kinetic energy, and pressure drop. A small or large inclined angle is suggested for the hydraulic transport of particles, and a 60° inclined pipe should be avoided to reduce energy consumption.
关键词
倾斜管 /
水力输送 /
计算流体动力学-离散元法(CFD-DEM) /
压降 /
两相流
Key words
inclined pipe /
hydraulic transport /
computational fluid dynamics-discrete element method (CFD-DEM) /
pressure drop /
two-phase flow
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] ABULNAGA B E. Slurry systems handbook [M]. New York: McGraw-Hill, 2002.
[2] ALAJBEGOVIC＇ A, ASSAD A, BONETTO F, et al. Phase distribution and turbulence structure for solid/fluid upflow in a pipe [J]. International Journal of Multiphase Flow, 1994, 20(3): 453-479.
[3] LI Y, ZHANG H B, LIN Z, et al. Relationship between wear formation and large-particle motion in a pipe bend [J]. Royal Society Open Science, 2019, 6(1): 181254.
[4] UZI A, BEN AMI Y, LEVY A. Erosion prediction of industrial conveying pipelines [J]. Powder Technology, 2017, 309: 49-60.
[5] VAEZI M, KUMAR A. Pipeline hydraulic transport of biomass materials: A review of experimental programs, empirical correlations, and economic assessments [J]. Biomass and Bioenergy, 2015, 81: 70-82.
[6] XU L, ZHANG Q, ZHENG J Y, et al. Numerical prediction of erosion in elbow based on CFD-DEM simulation [J]. Powder Technology, 2016, 302: 236-246.
[7] MATOUSEK V. Pressure drops and flow patterns in sand-mixture pipes [J]. Experimental Thermal and Fluid Science, 2002, 26(6-7): 693-702.
[8] 李鹏程. 粗颗粒垂直管水力提升规律研究 [D]. 北京: 清华大学, 2007. LI P C. Studies on mechanism of hydraulic hoist of coarse particle in vertical pipe [D]. Beijing: Tsinghua University, 2007. (in Chinese)
[9] SAD CHEMLOUL N, BENRABAH O. Measurement of velocities in two-phase flow by laser velocimetry: Interaction between solid particles' motion and turbulence [J]. Journal of Fluids Engineering, 2008, 130(7): 071301.
[10] RAVELET F, BAKIR F, KHELLADI S, et al. Experimental study of hydraulic transport of large particles in horizontal pipes [J]. Experimental Thermal and Fluid Science, 2013, 45: 187-197.
[11] VLASÁK P, CHÁRA Z, KRUPIČKA J, et al. Experimental investigation of coarse particles-water mixture flow in horizontal and inclined pipes [J]. Journal of Hydrology and Hydromechanics, 2014, 62(3): 241-247.
[12] LAHIRI S K, GHANTA K C. Slurry flow modelling by CFD [J]. Chemical Industry and Chemical Engineering Quarterly, 2010, 16(4): 295-308.
[13] OFEI T N, ISMAIL A Y. Eulerian-Eulerian simulation of particle-liquid slurry flow in horizontal pipe [J]. Journal of Petroleum Engineering, 2016, 2016: 5743471.
[14] MESSA G V, MALAVASI S. Numerical prediction of dispersed turbulent liquid-solid flows in vertical pipes [J]. Journal of Hydraulic Research, 2014, 52(5): 684-692.
[15] UZI A, LEVY A. Flow characteristics of coarse particles in horizontal hydraulic conveying [J]. Powder Technology, 2018, 326: 302-321.
[16] XIONG T, ZHANG X Z, MIEDEMA S A, et al. Study of the characteristics of the flow regimes and dynamics of coarse particles in pipeline transportation [J]. Powder Technology, 2019, 347: 148-158.
[17] ZHOU M M, WANG S, KUANG S B, et al. CFD-DEM modelling of hydraulic conveying of solid particles in a vertical pipe [J]. Powder Technology, 2019, 354: 893-905.
[18] 张德胜, 周游, 赵睿杰, 等. 垂直管内固-液两相流全耦合CFD-DEM模型研究 [J]. 农业机械学报, 2022, 53(12): 212-222. ZHANG D S, ZHOU Y, ZHAO R J, et al. Solid-liquid two-phase flow based on fully coupled CFD-DEM method in vertical pipe [J]. Transactions of the Chinese Society for Agricultural Machinery, 2022, 53(12): 212-222. (in Chinese)
[19] ZHAO R J, ZHOU Y, ZHANG D S, et al. Numerical investigation of the hydraulic transport of coarse particles in a vertical pipe based on a fully-coupled numerical model [J]. International Journal of Multiphase Flow, 2022, 155: 104094.
[20] 李文馨. 基于DEM的欧拉-拉格朗日水沙两相流数学模型及其应用 [D]. 北京: 清华大学, 2023. LI W X. Development and application of a DEM-based Euler-Lagrange model for sediment transport [D]. Beijing: Tsinghua University, 2023. (in Chinese)
[21] CROWE C T, SCHWARZKOPF J D, SOMMERFELD M, et al. Multiphase flows with droplets and particles: 2nd ed [M]. Boca Raton: CRC Press, 2012.
[22] SUN R, XIAO H. Diffusion-based coarse graining in hybrid continuum-discrete solvers: Theoretical formulation and a priori tests [J]. International Journal of Multiphase Flow, 2015, 77: 142-157.
[23] SUN R, XIAO H. Diffusion-based coarse graining in hybrid continuum-discrete solvers: Applications in CFD-DEM [J]. International Journal of Multiphase Flow, 2015, 72: 233-247.
[24] ZHOU Z Y, KUANG S B, CHU K W, et al. Discrete particle simulation of particle-fluid flow: Model formulations and their applicability [J]. Journal of Fluid Mechanics, 2010, 661: 482-510.
[25] DI FELICE R. The voidage function for fluid-particle interaction systems [J]. International Journal of Multiphase Flow, 1994, 20(1): 153-159.
[26] RONG L W, DONG K J, YU A B. Lattice-Boltzmann simulation of fluid flow through packed beds of uniform spheres: Effect of porosity [J]. Chemical Engineering Science, 2013, 99: 44-58.
[27] LOTH E, DORGAN A J. An equation of motion for particles of finite Reynolds number and size [J]. Environmental Fluid Mechanics, 2009, 9(2): 187-206.
[28] RUBINOW S I, KELLER J B. The transverse force on a spinning sphere moving in a viscous fluid [J]. Journal of Fluid Mechanics, 1961, 11(3): 447-459.
[29] GOSMAN A D, LOANNIDES E. Aspects of computer simulation of liquid-fueled combustors [J]. Journal of Energy, 1983, 7(6): 482-490.
[30] HERTZ H. On the contact of elastic solids [J]. Journal für die Reine und Angewandte Mathematik, 1882, 92: 156-171.
[31] MINDLIN R D, DERESIEWICZ H. Elastic spheres in contact under varying oblique forces [J]. Journal of Applied Mechanics, 1953, 20(3): 327-344.
[32] ZHANG L, ZHOU Y, SI Q R, et al. Coarse particle-laden flows and energy dissipation in inclined hydraulic conveying pipes [J]. Particulate Science and Technology, 2023: 1-19.
基金
国家自然科学基金国际合作与交流项目(41961144014)
PDF(6308 KB)
