收稿日期: 2020-05-13
网络出版日期: 2020-10-14
Mechanical properties of the drum-shaped welded hollow spherical joints of the Beijing Daxing International Airport
Received date: 2020-05-13
Online published: 2020-10-14
北京大兴国际机场被英国《卫报》评选为“新世界七大奇迹”榜首。该文以北京大兴国际机场航站楼屋盖钢结构所采用的新型鼓形焊接空心球节点为研究对象，完成了鼓形焊接空心球节点足尺模型的抗拉和抗压破坏试验，揭示了节点的受力特点和失效机理；建立了精确的有限元数值模型，经试验数据验证后，研究了鼓面位置、是否加肋、鼓面数、壁厚、球径等因素对鼓形焊接空心球节点极限承载力的影响规律。在足尺试验和数值模拟研究成果基础上，提出了鼓形焊接空心球节点轴压和轴拉承载力计算公式与设计方法，为今后鼓形焊接空心球节点的分析与设计提供了技术支撑。
陈志华 , 温锁林 , 刘红波 , 王小盾 , 高昊天 , 王留成 , 朱邵宁 . 北京大兴国际机场鼓形焊接空心球节点力学性能[J]. 清华大学学报（自然科学版）, 2020 , 60(12) : 967 -976 . DOI: 10.16511/j.cnki.qhdxxb.2020.25.033
Beijing Daxing International Airport is ranked as one of the Top Seven Wonders of the New World by the Guardian. The airport uses drum-shaped welded hollow spherical joints in the steel roof structure. This study measured the tensile and compressive strengths of a full-scale model of the drum-shaped welded hollow spherical joints and analyzed the joint failure mechanism. A finite element model was then used to study the effects of the drum position, stiffening rib arrangement, drum size, wall thickness, and sphere diameter on the ultimate bearing capacity of the joints after verification of the model against test data. Design methods and calculational formulas were developed based on the full-scale test data and the finite element analyses to predict the axial tension and axial compression loadbearing capacities of drum-shaped welded hollow spherical joints.
| 5 | LIU H B , YING J J , CHEN Z H , et al. Ultimate tensile and compressive performances of welded hollow spherical joints with H-beam[J]. Journal of Constructional Steel Research, 2018. 150, 195- 208. |
| 6 | HAN Q H , LIU X L . Ultimate bearing capacity of the welded hollow spherical joints in spatial reticulated structures[J]. Engineering Structures, 2004. 26 (1): 73- 82. |
| 9 | HAN Q H , LIU Y M , XU Y . Stiffness characteristics of joints and influence on the stability of single-layer latticed domes[J]. Thin-Walled Structures, 2016. 107, 514- 525. |
| 10 | YAN X Y , DUAN Y , ZHANG Y X , et al. Study on compressive bearing capacity and axial stiffness of welded hollow spherical joints with H-shaped steel member[J]. Engineering Structures, 2020. 203, 109821. |
| 11 | WEN S L , LIU H B , CHEN Z H , et al. Ultimate bearing behavior of H-beam welded hollow spheres under eccentric compression[J]. Engineering Structures, 2020. 212, 110522. |
| 13 | LU J , LIU H B , CHEN Z H . Post-fire behavior of welded hollow spherical joints subjected to eccentric loads[J]. International Journal of Steel Structures, 2018. 18 (2): 456- 472. |
| 14 | LU J , LIU H B , CHEN Z H . Behavior of welded hollow spherical joints after exposure to ISO-834 standard fire[J]. Journal of Constructional Steel Research, 2018. 140, 108- 124. |
| 15 | LIU H B , LU J , CHEN Z H . Residual behavior of welded hollow spherical joints after exposure to elevated temperatures[J]. Journal of Constructional Steel Research, 2017. 137, 102- 118. |
| 16 | ZHAO Z W , LIU H Q , LIANG B . Bending capacity of corroded welded hollow spherical joints[J]. Thin-Walled Structures, 2018. 127, 523- 539. |
| 17 | ZHAO Z W , LIU H Q , LIANG B . Assessment of the bending capacity of welded hollow spherical joints with pit corrosion[J]. Thin-Walled Structures, 2018. 131, 274- 285. |
| 18 | CHEN H Y , LIU H B , CHEN Z H . Compressive strength of corroded special-shaped welded hollow spherical joints based on numerical simulation[J]. Thin-Walled Structures, 2020. 149, 106531. |
| 19 | LIU H B , CHEN H Y , CHEN Z H . Residual behaviour of welded hollow spherical joints under corrosion and de-rusting[J]. Journal of Constructional Steel Research, 2020. 167, 105977. |
/
| 〈 |
|
〉 |
