[1] SANTOS R G, LOH W, BANNWART A C, et al. An overview of heavy oil properties and its recovery and transportation methods[J]. Brazilian Journal of Chemical Engineering, 2014, 31(3):571-590.
[2] 宁奎, 袁士宝, 蒋海岩. 火烧油层理论与实践[M]. 东营:中国石油大学出版社, 2009. NING K, YUAN S B, JIANG H Y. In-situ combustion theory & practice[M]. Dongying:China University of Petroleum Press, 2009. (in Chinese)
[3] LEI T M, WANG Z, LUO K H. Study of pore-scale coke combustion in porous media using lattice Boltzmann method[J]. Combustion and Flame, 2021, 225:104-119.
[4] YANG M, HARDING T G, CHEN Z X. Numerical investigation of the mechanisms in co-injection of steam and enriched air process using combustion tube tests[J]. Fuel, 2019, 242:638-648.
[5] YUAN C D, SADIKOV K, VARFOLOMEEV M, et al. Low-temperature combustion behavior of crude oils in porous media under air flow condition for in-situ combustion (ISC) process[J]. Fuel, 2020, 259:116293.
[6] 许强辉. 稠油火驱燃烧前缘的焦炭理化特性与反应传递问题研究[D]. 北京:清华大学, 2017. XU Q H. Chemical-structural properties of the coke and reactive transport of the combustion front during crude oil in-situ combustion[D]. Beijing:Tsinghua University, 2017. (in Chinese)
[7] 刘冬. 稠油火驱过程中的成焦机理与燃烧带推进特性研究[D]. 北京:清华大学, 2021. LIU D. Research on the coking mechanisms of heavy oil and the combustion zone propagation characteristics during in-situ combustion[D]. Beijing:Tsinghua University, 2021. (in Chinese)
[8] SARATHI P S. In-situ combustion handbook——principles and practices[R]. Tulsa, OK (US):National Petroleum Technology Office, 1999.
[9] 张方礼, 户昶昊, 马宏斌, 等. 辽河油田火驱开发技术进展[J]. 特种油气藏, 2020, 27(6):12-19. ZHANG F L, HU C H, MA H B, et al. Development of fire flooding technology in Liaohe oilfield[J]. Special Oil & Gas Reservoirs, 2020, 27(6):12-19. (in Chinese)
[10] XI C F, GUAN W L, HUANG J H. Research and application of fire-flooding technologies in post-steam injected heavy oil reservoir[C]//International Petroleum Technology Conference. Beijing, China:OnePetro, 2013.
[11] ALEXANDER J D, MARTIN W L, DEW J N. Factors affecting fuel availability and composition during in situ combustion[J]. Journal of Petroleum Technology, 1962, 14(10):1154-1164.
[12] BOUSAID I S, RAMEY JR H J. Oxidation of crude oil in porous media[J]. Society of Petroleum Engineers Journal, 1968, 8(2):137-148.
[13] RANJBAR M. Influence of reservoir rock composition on crude oil pyrolysis and combustion[J]. Journal of Analytical and Applied Pyrolysis, 1993, 27(1):87-95.
[14] 江航. 稠油中温氧化生热降黏基础实验研究[D]. 北京:中国石油勘探开发研究院, 2016.JIANG H. Experimental studies of heat release and viscosity reduction characteristics during the crude oil moderate temperature oxidation[D]. Beijing:Research Insititute of Pertroleum Exploration & Development, 2016. (in Chinese)
[15] FAN C, ZAN C, ZHANG Q, et al. Air injection for enhanced oil recovery:In situ monitoring the low-temperature oxidation of oil through thermogravimetry/differential scanning calorimetry and pressure differential scanning calorimetry[J]. Industrial & Engineering Chemistry Research, 2015, 54(26):6634-6640.
[16] FAN C, ZAN C, ZHANG Q, et al. The oxidation of heavy oil:Thermogravimetric analysis and non-isothermal kinetics using the distributed activation energy model[J]. Fuel Processing Technology, 2014, 119:146-150.
[17] 韩云超. 稠油中低温氧化生热基础实验与数值模型研究[D]. 北京:清华大学, 2018. HAN Y C. Basic experimental and numerical model study of low to medium temperature oxidation heating in heavy oil[D]. Beijing:Tsinghua University, 2018. (in Chinese)
[18] YANG J Y, XU Q H, JIANG H, et al. Reaction model of low asphaltene heavy oil from ramped temperature oxidation experimental analyses and numerical simulations[J]. Energy, 2021, 219:119669.
[19] MOORE R G, LAURESHEN C J, MEHTA S A, et al. Observations and design considerations for in situ combustion projects[J]. Journal of Canadian Petroleum Technology, 1999, 38(13):1-9.
[20] YOSHIKI K S, PHILLIPS C R. Kinetics of the thermo-oxidative and thermal cracking reactions of Athabasca bitumen[J]. Fuel, 1985, 64(11):1591-1598.
[21] DRICI O, VOSSOUGHI S. Study of the surface area effect on crude oil combustion by thermal analysis techniques[J]. Journal of Petroleum Technology, 1985, 37(4):731-735.
[22] HASCAKIR B, KOVSCEK A R. Analysis of in-situ combustion performance in heterogeneous media[C]//SPE Heavy Oil Conference. Calgary, Alberta, Canada:Society of Petroleum Engineers, 2014.
[23] 关文龙, 马德胜, 梁金中, 等. 火驱储层区带特征实验研究[J]. 石油学报, 2010, 31(1):100-104, 109. GUAN W L, MA D S, LIANG J Z, et al. Experimental research on thermodynamic characteristics of in-situ combustion zones in heavy oil reservoir[J]. Acta Petrolei Sinica, 2010, 31(1):100-104, 109. (in Chinese)
[24] 唐君实, 关文龙, 蒋有伟, 等. 稀油火烧油层物理模拟[J]. 石油学报, 2015, 36(9):1135-1140. TANG J S, GUAN W L, JIANG Y W, et al. Physical simulation of light oil in-situ combustion[J]. Acta Petrolei Sinica, 2015, 36(9):1135-1140. (in Chinese)
[25] 梁金中, 关文龙, 蒋有伟, 等. 水平井火驱辅助重力泄油燃烧前缘展布与调控[J]. 石油勘探与开发, 2012, 39(6):720-727. LIANG J Z, GUAN W L, JIANG Y W, et al. Propagation and control of fire front in the combustion assisted gravity drainage process using horizontal wells[J]. Petroleum Exploration and Development, 2012, 39(6):720-727. (in Chinese)
[26] 江航, 昝成, 宋新民, 等. 高压近绝热量热法获取原油氧化动力学参数[J]. 石油学报, 2014, 35(4):745-748. JIANG H, ZAN C, SONG X M, et al. Determination of oxidation kinetics parameters for crude oil using high pressure and near adiabatic calorimetry method[J]. Acta Petrolei Sinica, 2014, 35(4):745-748. (in Chinese)
[27] 唐君实, 关文龙, 梁金中, 等. 热重分析仪求取稠油高温氧化动力学参数[J]. 石油学报, 2013, 34(4):775-779. TANG J S, GUAN W L, LIANG J Z, et al. Determination on high-temperature oxidation kinetic parameters of heavy oils with thermogravimetric analyzer[J]. Acta Petrolei Sinica, 2013, 34(4):775-779. (in Chinese)
[28] MAHINPEY N, AMBALAE A, ASGHARI K. In situ combustion in enhanced oil recovery (EOR):A review[J]. Chemical Engineering Communications, 2007, 194(8):995-1021.
[29] 谭闻濒. 多孔介质中稠油结焦特性及其渗流实验研究[D]. 北京:清华大学, 2015. TANG W P. Coking properties of heavy oil in porous media and its seepage experiment research[D]. Beijing:Tsinghua University, 2015. (in Chinese)
[30] XU Q H, JIANG H, ZAN C, et al. Coke formation and coupled effects on pore structure and permeability change during crude oil in situ combustion[J]. Energy & Fuels, 2016, 30(2):933-942.
[31] 江航, 许强辉, 马德胜, 等. 注空气开采过程中稠油结焦量影响因素[J]. 石油学报, 2016, 37(8):1030-1036. JIANG H, XU Q H, MA D S, et al. Influence factors of coking amount during recovery of heavy oil by air injection[J]. Acta Petrolei Sinica, 2016, 37(8):1030-1036. (in Chinese)
[32] 许强辉, 江航, 史琳, 等. 注空气采油过程中焦炭生成及理化性质研究的装置及方法:105445444A [P]. 2016-03-30. XU Q H, JIANG H, SHI L, et al. Experimental apparatus and method for investigating coke formation and chemical-structural properties during crude oil air injection technique:105445444A [P]. 2016-03-30. (in Chinese)
[33] XU Q H, JIANG H, MA D S, et al. Pyrolysis of a low asphaltene crude oil under idealized in situ combustion conditions[J]. Energy & Fuels, 2017, 31(10):10545-10554.
[34] XU Q H, LIU Z M, JIANG H, et al. Chemical-structural properties of the coke produced by low temperature oxidation reactions during crude oil in-situ combustion[J]. Fuel, 2017, 207:179-188.
[35] 许然. 火烧油层技术中焦炭分布三维精细表征及焦炭性质研究[D]. 北京:清华大学, 2016. XU R. Advanced characterization of three-dimensional distribution of coke in coking sand and study on properties of coke[D]. Beijing:Tsinghua University, 2015. (in Chinese)
[36] 郑若楠. 稠油在典型黏土矿物作用下的热转化成焦研究[D]. 北京:清华大学, 2020. ZHENG R N. Research on the coke formation during the thermal conversion of heavy oil under the effect of typical clay minerals[D]. Beijing:Tsinghua University, 2020. (in Chinese)
[37] CNUDDE V, BOONE M N. High-resolution X-ray computed tomography in geosciences:A review of the current technology and applications[J]. Earth-Science Reviews, 2013, 123:1-17.
[38] WILDENSCHILD D, SHEPPARD A P. X-ray imaging and analysis techniques for quantifying pore-scale structure and processes in subsurface porous medium systems[J]. Advances in Water Resources, 2013, 51:217-246.
[39] MORENO-ATANASIO R, WILLIAMS R A, JIA X D. Combining X-ray microtomography with computer simulation for analysis of granular and porous materials[J]. Particuology, 2010, 8(2):81-99.
[40] XU Q H, LONG W, JIANG H, et al. Quantification of the microstructure, effective hydraulic radius and effective transport properties changed by the coke deposition during the crude oil in-situ combustion[J]. Chemical Engineering Journal, 2018, 331:856-869.
[41] 史琳, 许然, 许强辉, 等. 基于显微CT技术的结焦砂3维孔隙结构精细表征[J]. 清华大学学报(自然科学版), 2016, 56(10):1079-1084.SHI L, XU R, XU Q H, et al. Advanced characterization of three-dimensional pores in coking sand by micro-CT[J]. Journal of Tsinghua University (Science and Technology), 2016, 56(10):1079-1084. (in Chinese)
[42] OGUNBANWO O, GERRITSEN M, KOVSCEK A R. Uncertainty analysis on in-situ combustion simulations using experimental design[C]//SPE Western Regional Meeting. Bakersfield, California, USA:Society of Petroleum Engineers, 2012.
[43] 蒋海岩, 高成国, 袁士宝, 等. 火烧油层过程中稠油氧化反应的启动机理及干预机制[R]. 西安:西安石油大学, 中国石油天然气股份有限公司新疆油田分公司, 2020. JIANG H Y, GAO C G, YUAN S B, et al. The initiation and intervention mechanism of crude oil oxidation reactions during in-situ combustion[R]. Xi'an:Xi'an Shiyou University, PetroChina Xinjiang Oilfield Company, 2020. (in Chinese)
[44] XU Q H, LONG W, JIANG H, et al. Pore-scale modelling of the coupled thermal and reactive flow at the combustion front during crude oil in-situ combustion[J]. Chemical Engineering Journal, 2018, 350:776-790.
[45] XU Q, DAI X, YANG J, et al. Pore-scale modeling of coke combustion in a multiscale porous medium using the micro-continuum framework[J]. Journal of Fluid Mechanics, 2022, 932:A51.
[46] ZHU Z Y, LIU Y N, LIU C H, et al. In-situ combustion frontal stability analysis[J]. SPE Journal, 2021, 26(4):2271-2286.
[47] SOULAINE C, ROMAN S, KOVSCEK A, et al. Mineral dissolution and wormholing from a pore-scale perspective[J]. Journal of Fluid Mechanics, 2017, 827:457-483.
[48] CINAR M, CASTANIER L M, KOVSCEK A R. Combustion kinetics of heavy oils in porous media[J]. Energy & Fuels, 2011, 25(10):4438-4451.
[49] SEQUERA B, MOORE R G, MEHTA S A, et al. Numerical simulation of in-situ combustion experiments operated under low temperature conditions[J]. Journal of Canadian Petroleum Technology, 2010, 49(1):55-64.
[50] YANG M, HARDING T G, CHEN Z X. An improved kinetics model for in situ combustion of pre-steamed oil sands[J]. Energy & Fuels, 2017, 31(4):3546-3556.
[51] JIANG H, YANG J Y, HUANG J, et al. Heat release model for the low temperature oxidation of heavy oils from experimental analyses and numerical simulations[J]. Energy & Fuels, 2019, 33(5):3970-3978.
[52] CINAR M, CASTANIER L, KOVSCEK A R. Improved analysis of the kinetics of crude-oil in-situ combustion[C]//SPE Western Regional and Pacific Section AAPG Joint Meeting. Bakersfield, California, USA:Society of Petroleum Engineers, 2008.
