[1] 李俊杰,胡秋晨,刘鹏超,等. TBCC发动机的典型方案及试验技术发展分析[J].火箭推进, 2022, 48(6):26-34, 68. LI J J, HU Q C, LIU P C, et al. Analysis of typical scheme and test technique development of TBCC engine[J]. Journal of Rocket Propulsion, 2022, 48(6):26-34, 68.(in Chinese)
[2] 王占学,张明阳,张晓博,等.变循环涡扇冲压组合发动机发展现状及关键技术分析[J].推进技术, 2020, 41(9):1921-1934. DOI:10.13675/j.cnki.tjjs.200321.WANG Z X, ZHANG M Y, ZHANG X B, et al. Development status and key technologies of variable cycle turbofan-ramjet engine[J]. Journal of Propulsion Technology, 2020, 41(9):1921-1934. DOI:10.13675/j.cnki.tjjs.200321.(in Chinese)
[3] 陈博,桂丰,李茜,等.国外并联式涡轮基组合循环发动机技术发展途径浅析[J].燃气涡轮试验与研究, 2019, 32(1):57-62. CHEN B, GUI F, LI Q, et al. Study on the development approach of foreign over/under TBCC engine technology[J]. Gas Turbine Experiment and Research, 2019, 32(1):57-62.(in Chinese)
[4] 李凌蔚,吴宋伟,张天宏,等.涡轮基变循环组合动力控制技术发展分析[J].推进技术, 2023, 44(11):2203092. DOI:10.13675/j.cnki.tjjs.2203092.LI L W, WU S W, ZHANG T H, et al. Development analysis of turbine-based variable cycle combined power control technology[J]. Journal of Propulsion Technology, 2023, 44(11):2203092. DOI:10.13675/j.cnki.tjjs.2203092.(in Chinese)
[5] 王欣欣,张苏佳.涡轮基组合循环发动机的发展现状及关键技术浅析[J].中国航天, 2021(2):58-61. WANG X X, ZHANG S J. Development status and key technologies analysis of TBCC engine[J]. Aerospace China, 2021(2):58-61.(in Chinese)
[6] 孙启荣.组合动力技术比较及TBCC关键技术展望[J].科技视界, 2021(10):50-52. DOI:10.19694/j.cnki.issn2095-2457.2021.10.15.SUN Q R. Comparison of combined power technology and prospect of TBCC key technology[J]. Science&Technology Vision, 2021(10):50-52. DOI:10.19694/j.cnki.issn2095-2457.2021.10.15.(in Chinese)
[7] 彭小波.组合循环动力技术在天地往返领域的发展与应用[J].导弹与航天运载技术, 2013(1):78-82. PENG X B. Development of combined cycle propulsion technology in reusable launch vehicle[J]. Missiles and Space Vehicles, 2013(1):78-82.(in Chinese)
[8] MCCONNAUGHEY P K, FEMMININEO M G, KOELFGEN S J, et al. NASA's launch propulsion systems technology roadmap[R]. Washington, D.C.:USA. NASA, 2012.
[9] 张升升,郑雄,吕雅,等.国外组合循环动力技术研究进展[J].科技导报, 2020, 38(12):33-53. ZHANG S S, ZHENG X, LV Y, et al. Research progress of oversea combined cycle propulsion technology[J]. Science&Technology Review, 2020, 38(12):33-53.(in Chinese)
[10] COLVILLE J, LEWIS M. An aerodynamic redesign of the SR-71 inlet with applications to turbine based combined cycle engines[C]//40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Fort Lauderdale, USA:AIAA, 2004:3481.
[11] CORDA S, NEAL B A, MOES T R, et al. Flight testing the linear aerospike SR-71 experiment (LASRE):NASA/TM-1998-206567[R].Hanover:NASA, 1998.
[12] BARTOLOTTA P A, MCNELIS N B, SHAFER D G. High speed turbines:Development of a turbine accelerator (RTA) for space access:AIAA-2003-6943[R]. Virginia, USA:AIAA, 2003.
[13] BULMAN M, SIEBENHAAR A. Combined cycle propulsion:Aerojet innovations for practical hypersonic vehicles[C]//17th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. San Francisco, USA:AIAA, 2011:2397.
[14] WALKER S, TANG M, MORRIS S, et al. Falcon HTV-3X-a reusable hypersonic test bed[C]//15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Dayton, USA:AIAA, 2008:2544.
[15] MIYAGI H, MIYAGAWA H, MONJI T, et al. Combined cycle engine research in Japanese HYPR project[C]//31st Joint Propulsion Conference and Exhibit. San Diego, USA:AIAA, 1995:2751.
[16] MIYAGI H, KIMURA H, CABE J, et al. Combined cycle engine research in Japanese HYPR program[C]//34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Cleveland, USA:AIAA, 1998:3278.
[17] STEELANT J. Achievements obtained for sustained hypersonic flight within the LAPCAT project[C]//15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Dayton, USA:AIAA, 2008:2578.
[18] STEELANT J, VARVILL R, WALTON C, et al. Achievements obtained for sustained hypersonic flight within the LAPCAT-II project[C]//20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Glasgow, Scotland:AIAA, 2015:3677.
[19] 赵钰琦. TBCC发动机的建模与过渡段性能优化[D].哈尔滨:哈尔滨工业大学, 2014. ZHAO Y Q. Mathematic model and performance optimization in the transition section fro turbine based combined cycle engine[D]. Harbin:Harbin Institute of Technology, 2014.(in Chinese)
[20] 江晨钟. TBCC推进系统与飞行器耦合建模及特性分析[D].哈尔滨:哈尔滨工业大学, 2017. JIANG C Z. The coupled modeling and characteristics analisis of tbcc propulsion system and aerocraft[D]. Harbin:Harbin Institute of Technology, 2017.(in Chinese)
[21] 李龙. TBCC推进系统总体性能建模与工作特性分析[D].南京:南京航空航天大学, 2008. LI L. Performance mathematic model and operation characteristic analysis for turbine based combined cycle engine[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2008.(in Chinese)
[22] 尹朝林.外并联式TBCC组合发动机的建模与特性分析[D].哈尔滨:哈尔滨工业大学, 2016. YIN C L. The modeling and characteristicsanalisis of over/under TBCC[D]. Harbin:Harbin Institute of Technology, 2016.(in Chinese)
[23] 张建东. TBCC发动机进气系统设计技术研究[D].西安:西北工业大学, 2007. ZHANG J D. Research on design technology of TBCC intake system[D]. Xi'an:Northwestern Polytechnical University, 2007.(in Chinese)
[24] 倪凯捷. TBCC可调二元进气道设计方法研究[D].南京:南京理工大学, 2017. NI K J. Research on TBCC adjustable binary inlet design method[D]. Nanjing:Nanjing University of Science&Technology, 2017.(in Chinese)
[25] 闵浩. TBCC可调高超声速内转进气道设计方法研究[D].南京:南京理工大学, 2018. MIN H. Research on the design method of TBCC adjustable hypersonic internal rotor inlet[D]. Nanjing:Nanjing University of Science and Technology, 2018.(in Chinese)
[26] 刘君.并联型TBCC进气道模态转换过程气动特性及流动机理[D].南京:南京航空航天大学, 2020. DOI:10.27239/d.cnki.gnhhu.2020.002529.LIU J. Aerodynamic and fluid dynamics investigation of inlet mode transition for turbine based combined cycle propulsion system[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2020. DOI:10.27239/d.cnki.gnhhu.2020.002529.(in Chinese)
[27] 邬林科.宽域TBCC可调组合进气道设计方法及气动特性研究[D].哈尔滨:哈尔滨工业大学, 2020. DOI:10.27061/d.cnki.ghgdu.2020.004296.WU L K. Research on design and aerodynamic characteristics of wide-range TBCC variable combined inlet[D]. Harbin:Harbin Institute of Technology, 2020. DOI:10.27061/d.cnki.ghgdu.2020.004296.(in Chinese)
[28] 乐婷.内并联TBCC进气道变几何设计及气动性能研究[D].南京:南京航空航天大学, 2019. DOI:10.27239/d.cnki.gnhhu.2019.000117.YUE T. Variable geometry design andaerodynamic performance research of TBCC inlet[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2019. DOI:10.27239/d.cnki.gnhhu.2019.000117.(in Chinese)
[29] 何墨凡.内转式TBCC进气道气动设计与分析[D].南京:南京航空航天大学, 2020. DOI:10.27239/d.cnki.gnhhu.2020.001136.HE M F. Aerodynamic design and analysis of TBCC inward-turning inlet[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2020. DOI:10.27239/d.cnki.gnhhu.2020.001136.(in Chinese)
[30] 蒲永彬.一体化二元变几何进气道设计及气动性能研究[D].南京:南京航空航天大学, 2018. PU Y B. Variable geometry design and aerodynamic performance research of integrated two-dimensional inlet[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2018.(in Chinese)
[31] 曹石彬.外并联型TBCC进气道模态转换特性研究[D].哈尔滨:哈尔滨工业大学, 2016. CAO S B. Investigation of over/under TBCC inlet mode transition characteristics[D]. Harbin:Harbin Institute of Technology, 2016.(in Chinese)
[32] 唐伟员.用于内并联TBCC的变几何二元式进气道设计及气动研究[D].南京:南京航空航天大学, 2016. TANG W Y. Aerodynamic design and study of a variable geometry two-dimensional inlet used in inner shunt-wound turbine based combined cycle[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2016.(in Chinese)
[33] 吕郑. Ma0-6并联式TBCC排气系统的设计及性能研究[D].南京:南京航空航天大学, 2019. DOI:10.27239/d.cnki.gnhhu.2019.002012.LÜ Z. Research on design and performance of Ma0-6 over-under TBCC exhaust system[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2019. DOI:10.27239/d.cnki.gnhhu.2019.002012.(in Chinese)
[34] 汪丰. Ma0-7并联式TBCC排气系统设计与性能研究[D].南京:南京航空航天大学, 2018. DOI:10.27239/d.cnki.gnhhu.2019.000418.WANG F. Design and performance study of a Ma0-7 over-under TBCC exhaust system[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2018. DOI:10.27239/d.cnki.gnhhu.2019.000418.(in Chinese)
[35] 李超.并联式TBCC排气系统的气动设计、性能研究及初步优化[D].南京:南京航空航天大学, 2008. LI C. Aerodynamic scheme designing, performance analysis and preliminary optimization of over/under TBCC exhaust system[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2008.(in Chinese)
[36] 彭波.并联式TBCC排气系统优化设计及性能研究[D].南京:南京航空航天大学, 2021. DOI:10.27239/d.cnki.gnhhu.2021.000696.PENG B. Optimization design and performance study of parallel TBCC exhaust system[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2021. DOI:10.27239/d.cnki.gnhhu.2021.000696.(in Chinese)
[37] 周唯阳.串联布局TBCC可调喷管的设计、仿真与实验研究[D].南京:南京航空航天大学, 2012. ZHOU W Y. Computational and experimental study on avariable nozzle for TBCC with tandem layout[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2012.(in Chinese)
[38] 李恒.基于TBCC飞推一体化计力体系研究[D].南京:南京航空航天大学, 2021. DOI:10.27239/d.cnki.gnhhu.2021.001119.LI H. Research on force accounting of the airframe integrated propulsion system based on TBCC[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2021. DOI:10.27239/d.cnki.gnhhu.2021.001119.(in Chinese)
[39] 伍谦.串联式TBCC发动机建模与控制方法研究[D].南京:南京航空航天大学, 2018. WU Q. Research on modeling and control of Co-axial turbine-based combined cycle engine[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2018.(in Chinese)
[40] 冯海龙.串联式TBCC发动机模式转换控制方法研究[D].南京:南京航空航天大学, 2020. DOI:10.27239/d.cnki.gnhhu.2020.000861.FENG H L. Research on mode transition control of tandem turbine based combined cycle engine[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2020. DOI:10.27239/d.cnki.gnhhu.2020.000861.(in Chinese)
[41] 桂丰.高超声速飞行器飞推一体化气动性能与优化研究[D].南京:南京航空航天大学, 2013. GUI F. Research on airframe/propulsion integrated aerodynamic performance and optimization for hypersonic vehicle[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2013.(in Chinese)
[42] 吴琼.高超声速飞行器飞推一体气动设计改进研究[D].南京:南京航空航天大学, 2019. DOI:10.27239/d.cnki.gnhhu.2019.000594.WU Q. The improvement research on the aerodynamic design of hypersonic vehicle/propulsion integration[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2019. DOI:10.27239/d.cnki.gnhhu.2019.000594.(in Chinese)
[43] 韦宝禧,凌文辉,冮强,等. TRRE发动机关键技术分析及推进性能探索研究[J].推进技术, 2017, 38(2):298-305. DOI:10.13675/j.cnki.tjjs.2017.02.008.WEI B X, LING W H, GANG Q, et al. Analysis of key technologies and propulsion performance research of TRRE engine[J]. Journal of Propulsion Technology, 2017, 38(2):298-305. DOI:10.13675/j.cnki.tjjs.2017.02.008.(in Chinese)
[44] 赵俊杰,徐惊雷.基于CFD/CSD的TRRE排气系统气-热耦合分析[J].机械制造与自动化, 2022, 51(2):103-106. DOI:10.19344/j.cnki.issn1671-5276.2022.02.028.ZHAO J J, XU J L. Fluid-thermal coupling analysis based on CFD/CSD of TRRE exhaust system[J]. Machine Building&Automation, 2022, 51(2):103-106. DOI:10.19344/j.cnki.issn1671-5276.2022.02.028.(in Chinese)
[45] 西北工业大学"飞天一号"火箭冲压组合动力飞行试验圆满成功[J].陕西教育(高教), 2022(9):9. Northwestern Polytechnical University "Feitian One" rocket stamping combination power flight test was successful[J]. Shaanxi Education, 2022(9):9.(in Chinese)
[46] MARU Y, TANATSUGU N, SATO T, et al. Multi-row disk arrangement concept for spike of axisymmetric air inlet[C]//40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Fort Lauderdale, USA:AIAA, 2004:3407.
[47] ALBERTSON C, EMAMI S, TREXLER C. Mach 4 test results of a dual-flowpath, turbine based combined cycle inlet[C]//14th AIAA/AHI Space Planes and Hypersonic Systems and Technologies Conference. Canberra, Australia:AIAA, 2006:8138.
[48] MALO-MOLINA F, GAITONDE D, KUTSCHENREUTER P. Numerical investigation of an innovative inward turning inlet[C]//17th AIAA Computational Fluid Dynamics Conference. Toronto, Canada:AIAA, 2005:4871.
[49] SMART M, TREXLER C. Mach 4 performance of a fixed-geometry hypersonic inlet with rectangular-to-elliptical shape transition[C]//41st Aerospace Sciences Meeting and Exhibit. Reno, Nevada:AIAA, 2003.
[50] SMART M, WHITE J. Computational investigation of the performance and back-pressure limits of a hypersonic inlet[C]//40th AIAA Aerospace Sciences Meeting&Exhibit. Reno, USA:AIAA, 2002:508.
[51] UNGEWITTER R, OTT J, DASH S. Advanced modeling methods for hypersonic scramjet evaluation[C]//42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference&Exhibit. Sacramento, USA:AIAA, 2006:4578.
[52] TAGUCHI H, FUTAMURA H, SHIMODAIRA K, et al. Design study on hypersonic engine components for TBCC space planes[C]//12th AIAA International Space Planes and Hypersonic Systems and Technologies. Norfolk, USA:AIAA, 2003:7006.
[53] OKAI K, TAGUCHI H, KOJIMA T, et al. Numerical analysis of variable intake and nozzle for hypersonic engines[C]//12th AIAA International Space Planes and Hypersonic Systems and Technologies. Norfolk, USA:AIAA, 2003:7069.
[54] LEDERER R, SCHWAB R, VOSS N. Hypersonic airbreathing propulsion activities for Saenger[C]//3rd International Aerospace Planes Conference. Orlando, USA:AIAA, 1991:5040.
[55] SCHABER R, SCHWAB R, VOSS N. Hypersonic propulsion considerations for a flying testbed[C]//27th Joint Propulsion Conference. Sacramento, USA:AIAA, 1991:2492.
[56] BERENS T. Experimental and numerical analysis of a two-duct nozzle/afterbody model at supersonic mach numbers[C]//International Aerospace Planes and Hypersonics Technologies. Chattanooga, USA:AIAA, 1995:6085.
[57] GAMBLE E, HAID D. Improving off-design nozzle performance using fluidic injection[C]//42nd AIAA Aerospace Sciences Meeting and Exhibit. Reno, USA:AIAA, 2004:1206.
[58] GAMBLE E, HAID D, D'ALESSANDRO S. Hydraulic and kinematic system model for TBCC dynamic Simulation[C]//46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference&Exhibit. Nashville, USA:AIAA, 2010:6641.
[59] LEDERER R. Testing the actively cooled, fully variable hypersonic demonstrator nozzle-results from the test campaign 1995/96[C]//Space Plane and Hypersonic Systems and Technology Conference. Norfolk, USA:AIAA, 1996:4550.
[60] 张留欢,徐惊雷,莫建伟.二元非对称喷管可调方案试验研究[J].航空学报, 2013, 34(4):772-778. ZHANG L H, XU J L, MO J W. Experimental study of 2D adjustable asymmetric nozzles[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(4):772-778.(in Chinese)
[61] YUNGSTER S, TREFNY C. Computational study of single-expansion-ramp nozzles with external burning[C]//32nd Aerospace Sciences Meeting and Exhibit. Reno, USA:AIAA, 1994:24.
[62] ASBURY S, GUNTHER C, HUNTER C. A passive cavity concept for improving the off-design performance of fixed-geometry exhaust nozzles[C]//32nd Joint Propulsion Conference and Exhibit. Lake Buena Vista, USA:AIAA, 1996:2541.
[63] GRØNLAND T A, BERENS T. Nozzle/afterbody integration of hypersonic vehicles by means of secondary air injection[C]//6th International Aerospace Planes and Hypersonics Technologies. Chattanooga, USA:AIAA, 1995.
[64] STUEBER T J, VRNAK D R, LE D K, et al. Control activity in support of NASA turbine based combined cycle (TBCC) research[R]. LKa Jolla, USA:NASA, 2010.
[65] OUZTS P. Mode transition design considerations for an airbreathing combined-cycle hypersonic vehicle[C]//15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Dayton, USA:AIAA, 2008:2621.
[66] MIN C, HAILONG T, ZHILI Z. Goal programming for stable mode transition in tandem turbo-ramjet engines[J]. Chinese Journal of Aeronautics, 2009, 22(5):486-492.
[67] CHEN M, JIA Z H, TANG H L. Research on integrated design of multi-variable combination adjusting laws of inlet/TBCC engine[J]. Energy Procedia, 2019, 158:1598-1605.
[68] QIU X J, SU W S, TANG Y T. The mode switch control research of small-type parallel TBCC engine based on SQP method[C]//AIAA Modeling and Simulation Technologies Conference. Dallas, USA:AIAA, 2015:2656.
[69] 聂聆聪,李岩,戴冬红,等.涡轮冲压组合发动机模态转换多变量控制研究[J].推进技术, 2017, 38(5):968-974. DOI:10.13675/j.cnki.tjjs.2017.05.002.NIE L C, LI Y, DAI D H, et al. Study on mode transition multi-variable control for turbine-based combined cycle engine[J]. Journal of Propulsion Technology, 2017, 38(5):968-974. DOI:10.13675/j.cnki.tjjs.2017.05.002.(in Chinese)
[70] 廉筱纯,吴虎.航空发动机原理[M].西安:西北工业大学出版社, 2005. LIAN X C, WU H. Principle of aeroengine[M]. Xi'an:Northwestern Polytechnical University Press, 2005.(in Chinese)
[71] 李韦康,张乐临,申丽艳,等.预冷涡轮组合发动机循环及其关键技术研究综述[J/OL].航空发动机, 2024:1-16.[2024-04-23]. http://kns.cnki.net/kcms/detail/21.1359.V.20240322.1235.002.html. LI W K, ZHANG L L, SHEN L Y, et al. Summary of research on precooled turbine combined engine cycle and its key technologies[J/OL]. Aeroengine, 2024:1-16.[2024-04-23]. http://kns.cnki.net/kcms/detail/21.1359.V.20240322.1235.002.html.(in Chinese)
[72] 焦帅祥.低阻高效空气预冷器设计优化与性能研究[D].长沙:国防科技大学, 2021. DOI:10.27052/d.cnki.gzjgu.2021.000926.JIAO S X. Optimization and performance research of low-resistance and high-efficiency air precooler[D]. Changsha:National University of Defense Technology, 2021. DOI:10.27052/,dcnki.Gzjgu.2021.000926.(in Chinese)
[73] 李帅,马同玲,刘洪涛,等. SABRE预冷器结构参数对其性能影响的数值分析[J].推进技术, 2022, 43(4):200818. DOI:10.13675/j.cnki.tjjs.200818.LI S, MA T L, LIU H T, et al. Numerical analysis of effects of pre-cooler structure parameter on its performance in SABRE[J]. Journal of Propulsion Technology, 2022, 43(4):200818. DOI:10.13675/j.cnki.tjjs.200818.(in Chinese)
[74] 徐东君,廉洁,南向谊,等.复合印刷电路板式预冷器的热力设计与优化[J].火箭推进, 2022, 48(6):59-68. XU D J, LIAN J, NAN X Y, et al. Thermal design and optimization of hybrid printed circuit precooler[J]. Journal of Rocket Propulsion, 2022, 48(6):59-68.(in Chinese)
[75] LIN A Q, ZHOU J, FAWZY H, et al. Evaluation of mass injection cooling on flow and heat transfer characteristics for high-temperature inlet air in a MIPCC engine[J]. International Journal of Heat and Mass Transfer, 2019, 135:620-630.
[76] MING L L, WU Y D, YANG Z Y, et al. Numerical study on the influence of mist-air mixtures on axial compressor performance[J]. Aerospace Science and Technology, 2022, 123:107505.
[77] NOVELO D A B, IGIE U, PRAKASH V, et al. Experimental investigation of gas turbine compressor water injection for NOx emission reductions[J]. Energy, 2019, 176:235-248.
[78] 林阿强,郑群,张海,等.射流冷却对航空发动机压气机的特性分析[J].哈尔滨工程大学学报, 2019, 40(9):1608-1615.LIN A Q, ZHENG Q, ZHANG H, et al. Analysis of mass injection cooling on aero-engine compressor characteristics[J]. Journal of Harbin Engineering University, 2019, 40(9):1608-1615.(in Chinese)
[79] 刘旭峰,常鸿雯,薛洪科,等.射流预冷装置温降与流阻特性试验研究[J].航空发动机, 2018, 44(2):81-86. DOI:10.13477/j.cnki.aeroengine.2018.02.014.LIU X F, CHANG H W, XUE H K, et al. Investigation on temperature drop and flow resistance characteristics of mass injection pre-compressor cooling device[J]. Aeroengine, 2018, 44(2):81-86. DOI:10.13477/j.cnki.aeroengine.2018.02.014.(in Chinese)
[80] 郭建忠,蒋妮,程新荣,等.空天动力新型高性能燃料发展趋势及建议[J].空天技术, 2023(3):79-87. DOI:10.16338/j.issn.2097-0714.20220625.GUO J Z, JIANG N, CHENG X R, et al. Development trend and suggestion of new high performance fuel for aerospace propulsion[J]. Aerospace Technology, 2023(3):79-87. DOI:10.16338/j.issn.2097-0714.20220625.(in Chinese)
[81] 王赛,方建华,吴江,等.高能量密度燃料的合成及研究进展[J].当代化工, 2022, 51(3):691-696, 702. DOI:10.13840/j.cnki.cn21-1457/tq.2022.03.028.WANG S, FANG J H, WU J, et al. Synthesis and research progress of high energy density fuel[J]. Contemporary Chemical Industry, 2022, 51(3):691-696, 702. DOI:10.13840/j.cnki.cn21-1457/tq.2022.03.028.(in Chinese)
[82] HANK J, MURPHY J, MUTZMAN R. The X-51A scramjet engine flight demonstration program[C]//15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Dayton, USA:AIAA, 2008:2540.
[83] NIE J R, JIA T H, PAN L, et al. Development of high-energy-density liquid aerospace fuel:A perspective[J]. Transactions of Tianjin University, 2022, 28(1):1-5.
[84] BALSTER L M, CORPORAN E, DEWITT M J, et al. Development of an advanced, thermally stable, coal-based jet fuel[J]. Fuel Processing Technology, 2008, 89(4):364-378.
[85] HUANG B, SHRESTHA U, DAVIS R J, et al. Endothermic pyrolysis of JP-10 with and without zeolite catalyst for hypersonic applications[J]. AIAA Journal, 2018, 56(4):1616-1626.
[86] 刘小勇,张香文,方文军,等.吸气式发动机燃料研究进展及展望[J].推进技术, 2018, 39(10):2191-2195. DOI:10.13675/j.cnki.tjjs.2018.10.004.LIU X Y, ZHANG X W, FANG W J, et al. Fuel demand and future prospect for air-breathing aerospace engines[J]. Journal of Propulsion Technology, 2018, 39(10):2191-2195. DOI:10.13675/j.cnki.tjjs.2018.10.004.(in Chinese)
[87] CHAVEZ F R, SCHMIDT D K. Analytical aeropropulsive-aeroelastic hypersonic-vehicle model with dynamic analysis[J]. Journal of Guidance, Control, and Dynamics, 1994, 17(6):1308-1319.
[88] BOLENDER M, DOMAN D. A non-linear model for the longitudinal dynamics of a hypersonic air-breathing vehicle[C]//AIAA Guidance, Navigation, and Control Conference and Exhibit. San Francisco, USA:AIAA, 2005:6255.
[89] BOLENDER M A, DOMAN D B. Nonlinear longitudinal dynamical model of an air-breathing hypersonic vehicle[J]. Journal of spacecraft and rockets, 2007, 44(2):374-387.
[90] PARKER J T, SERRANI A, YURKOVICH S, et al. Control-oriented modeling of an air-breathing hypersonic vehicle[J]. Journal of Guidance, Control, and Dynamics, 2007, 30(3):856-869.
[91] BENSON T. Interactive educational tool for turbofan and afterburning turbojet engines[C]//32nd Joint Propulsion Conference and Exhibit. Lake Buena Vista, USA:AIAA, 1996:2561.
[92] BECHTEL R S, OLDS J R. T-BEAT:A conceptual design tool for turbine-based propulsion system analysis[R]. Georgia:Georgia Institute of Technology, 2001.
[93] SUBRAHMANYAM P. Numerical investigation of parametric and off-design performance analysis and simulation for airbreathing engines at hypersonic velocities[C]//44th AIAA Aerospace Sciences Meeting and Exhibit. Reno, USA:AIAA, 2006:220.
[94] YATSUYANAGI N, CHINZEI N, MITANI T, et al. Ramjet engine test facility (RJTF) in NAL-KRC, Japan[C]//8th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Norfolk, USA:AIAA, 1998:1511.
[95] 钟萍,陈丽艳,王颖.国外高超声速技术焦点领域及相关设备改造综述[J].飞航导弹, 2011(10):17-22. DOI:10.16338/j.issn.1009-1319.2011.10.013.ZHONG P, CHEN L Y, WANG Y. Overview of the focus areas of hypersonic technology and related equipment transformation in foreign countries[J]. Aerodynamic Missile Journal, 2011(10):17-22. DOI:10.16338/j.issn.1009-1319.2011.10.013.(in Chinese)
