Dual-mode hybrid track-type vehicle powertrain design using planetary gear sets

QIN Zhaobo; LUO Yugong; XIE Laiqing; CHEN Wenqiang; LI Keqiang

doi:10.16511/j.cnki.qhdxxb.2018.22.005

PDF(3090 KB)

Journal of Tsinghua University(Science and Technology) ›› 2018, Vol. 58 ›› Issue (1) : 27-34. DOI: 10.16511/j.cnki.qhdxxb.2018.22.005

AUTOMOTIVE ENGINEERING

Dual-mode hybrid track-type vehicle powertrain design using planetary gear sets

{{article.zuoZhe_EN}}

Author information +

History +

Abstract

This paper presents a powertrain design for hybrid track-type vehicles based on planetary gear sets. The design uses a three planetary gear set structure with two operating modes for the best fuel efficiency while improving the straight driving performance and the steering performance. This design eliminates the complex steering shaft while ensuring the steering index and improving steering efficiency compared with current powertrain designs. An automated modelling method is used to analyze all the candidate designs. The designs are screened using dynamic programming to analyze the fuel economy to select the best one with the least fuel consumption. Simulations indicate that the design has better performance and fuel economy than the current series hybrid benchmark for the track-type vehicle powertrain design.

Key words

planetary gear set / track-type vehicle / hybrid vehicle / dual mode / steering performance

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

QIN Zhaobo, LUO Yugong, XIE Laiqing, CHEN Wenqiang, LI Keqiang. Dual-mode hybrid track-type vehicle powertrain design using planetary gear sets[J]. Journal of Tsinghua University(Science and Technology). 2018, 58(1): 27-34 https://doi.org/10.16511/j.cnki.qhdxxb.2018.22.005

References

[1] LE A T. Modelling and control of tracked vehicles[D]. Sydney, Australia:University of Sydney, 1999.[2] JO D Y, KWAK S, KIM N. Development of fuel-efficient construction equipment[C]//IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE & ECCE, 2011). Jeju, Korea, 2011:31-37.[3] DIESEL I C. Hybrid electric and hydraulic technology applications in off-road vehicles[M]//Transportation technologies for sustainability. Berlin, Germany:Springer, 2012.[4] DUOBA M, NG H, LARSEN R. Characterization and comparison of two hybrid electric vehicles (HEVs):Honda Insight and Toyota Prius:SAE technical paper[R]. Warrendale, USA:SAE, 2001.[5] LIU J, PENG H. Modeling and control of a power-split hybrid vehicle[J]. IEEE Transactions on Control Systems Technology, 2008, 16(6):1242-1251.[6] ZHANG X, LI S E, PENG H, et al. Design of multimode power-split hybrid vehicles:A case study on the Voltec powertrain system[J]. IEEE Transactions on Vehicular Technology, 2016, 65(6):4790-4801.[7] YOSHIMURA T. Vehicle power transmission:US8535189 B2. 2013.[8] 邹渊, 陈晓玲, 李东阁, 等. 串联式混合动力推土机驱动系参数匹配设计[J]. 机械工程学报, 2014, 50(1):70-75.ZOU Y, CHEN X L, LI D G, et al. Parameter matching design and control optimization for series hybrid tracked bulldozer[J]. Journal of Mechanical Engineering, 2014, 50(1):70-75. (in Chinese)[9] 盖江涛, 黄守道, 周广明, 等. 双电机耦合驱动履带车辆自适应滑模转向控制[J]. 兵工学报, 2015, 36(3):405-411.GAI J T, HUANG S D, ZHOU G M, et al. Adaptive sliding mode steering control of double motor coupling drive transmission for tracked vehicle[J]. Acta Armamentarii, 2015, 36(3):405-411. (in Chinese)[10] 张东好, 项昌乐, 韩立金, 等. 功率分流混合动力车辆多目标优化分层控制方法[J]. 吉林大学学报(工学版), 2016, 46(2):373-382.ZHANG D H, XIANG C L, HAN L J, et al. Multi-objective optimization hierarchic control method for power-split hybrid electric vehicles[J]. Journal of Jilin University (Engineering and Technology Edition), 2016, 46(2):373-382. (in Chinese)[11] QIN Z, LUO Y, PAN Z, et al. Optimal design of hybrid track-type dozers with two-planetary gear sets and clutches[C]//Proceedings of the 13th International Symposium on Advanced Vehicle Control (AVEC'16). Munich, Germany, 2016.[12] 秦兆博, 罗禹贡, 张东好, 等. 液压混合动力履带推土机行星齿轮传动系统的设计[J]. 清华大学学报(自然科学版), 2017, 57(5):497-503. QIN Z B, LUO Y G, ZHANG D H, et al. Powertrain design of hydraulic hybrid track-type bull dozers based on planetary gear sets[J]. Journal of Tsinghua University (Science and Technology), 2017, 57(5):497-503. (in Chinese)[13] YANG H, CHO S, KIM N, et al. Analysis of planetary gear hybrid powertrain system, Part 1:Input split system[J]. International Journal of Automotive Technology, 2007, 8(6):771-780.[14] BENFORD H, LEISING M. The lever analogy:A new tool in transmission analysis:SAE technical paper 810102[R]. Warrendale, USA:SAE, 1981.