[1] 黄兴, 郭飞, 叶素娟, 等. 橡塑密封技术发展现状与趋势[J]. 润滑与密封, 2020, 45(6):1-6, 21. HUANG X, GUO F, YE S J, et al. Research status and development trend of rubber and plastic sealing technology[J]. Lubrication Engineering, 2020, 45(6):1-6, 21. (in Chinese)
[2] 吴长贵. 高压航空作动器主密封性能研究[D]. 北京:清华大学, 2016. WU C G. Research on main sealing performance of high pressure aircraft actuator[D]. Beijing:Tsinghua University, 2016. (in Chinese)
[3] ZHANG S W, LIU Q J, HE R Y. Mechanisms of wear of metal by nitrile rubber under boundary lubrication conditions[J]. Lubrication Science, 2001, 13(2):167-180.
[4] ZHANG S W, LIU H C, HE R Y. Mechanisms of wear of steel by natural rubber in water medium[J]. Wear, 2004, 256(3-4):226-232.
[5] ZHANG S W, HE R Y. Advances in the study on wear of metals by polymers[J]. Journal of Materials Science, 2004, 39(18):5625-5632.
[6] VINOGRADOV G V, MUSTAFAEV V A, PODOLSKY Y Y. A study of heavy metal-to-plastic friction duties and of the wear of hardened steel in the presence of polymers[J]. Wear, 1965, 8(5):358-373.
[7] GENT A N, PULFORD C T R. Wear of steel by rubber[J]. Wear, 1978, 49(1):135-139.
[8] GENT A N, PULFORD C T R. Wear of metal by rubber[J]. Journal of Materials Science, 1979, 14(6):1301-1307.
[9] AB-MALEK K, STEVENSON A. On the lubrication and wear of metal by rubber[J]. Journal of Materials Science, 1984, 19(2):585-594.
[10] KING R B, LANCASTER J K. Wear of metals by elastomers in an abrasive environment[J]. Wear, 1980, 61(2):341-352.
[11] 何仁洋. 高分子材料磨损金属的机理及其应用的基础研究[D]. 北京:中国石油大学, 2001. HE R Y. Fundamental research on the mechanism and application of polymer material wear metal[D]. Beijing:China University of Petroleum, 2001. (in Chinese)
[12] MYSHKIN N K, KOVALEV A V. Adhesion and friction of polymers[M]//SINHA S K, BRISCOE B J. Polymer fribology. Singapore:Imperial College Press, 2009:3-37.
[13] LUDEMA K C, AJAYI O O. Friction, wear, lubrication:A textbook in tribology[M]. 2nd ed. Boca Raton, USA:CRC Press, 2018.
[14] 沈明学, 李波, 容康杰, 等. 水润滑条件下磨粒尺寸对橡胶密封副摩擦学行为的影响[J]. 摩擦学学报, 2020, 40(2):252-259. SHEN M X, LI B, RONG K J, et al. Effect of abrasive size on tribological behavior of rubber sealing pair under water-lubricated conditions[J]. Tribology, 2020, 40(2):252-259. (in Chinese)
[15] PARK T J, YOO J, JO H, et al. Contact stress analysis of a spherical wear particle between seal and steel surface[C]//Proceedings of the Korean Society of Precision Engineering Conference. Seoul, Republic of Korean, 2007:395-396.
[16] GILTROW J P. A relationship between abrasive wear and the cohesive energy of materials[J]. Wear, 1970, 15(1):71-78.
[17] GAO J T. Tribochemical effects in formation of polymer transfer film[J]. Wear, 2000, 245(1-2):100-106.
[18] KAR M K, BAHADUR S. The wear equation for unfilled and filled polyoxymethylene[J]. Wear, 1974, 30(3):337-348.
[19] ZALISZ Z, VROEGOP P H, BOSMA R. A running-in model for the reciprocating sliding of Nylon 6.6 against stainless steel[J]. Wear, 1988, 121(1):71-93.
[20] STACHOWIAK G, BATCHELOR A. Engineering tribology[M]. 4th ed. Oxford, UK:Butterworth-Heinemann, 2013.
[21] BUCKLEY D H. Surface effects in adhesion, friction, wear, and lubrication[M]. Amsterdam, Netherland:Elsevier, 1981.
[22] BELY V, SVIRIDENOK A, PETROKOVETS M. Friction and wear in polymer-based materials[M]. Amsterdam, Netherland:Elsevier, 1982.
[23] HORNBOGEN E. The role of fracture toughness in the wear of metals[J]. Wear, 1975, 33(2):251-259.
[24] BRISCOE B J. Friction and wear in polymer-based materials[J]. Tribology International, 1982, 15(5):272.
[25] 王汝霖. 润滑剂摩擦化学[M]. 北京:中国石化出版社, 1994. WANG R L. Lubricant tribology[M]. Beijing:China Petrochemical Press, 1994. (in Chinese)
[26] BHUSHAN B, SHARMA B S, BRADSHAW R L. Friction in magnetic tapes I:Assessment of relevant theory[J]. A S L E Transactions, 1984, 27(1):33-44.
[27] SAKAGAMI T, OGURA K, SHODA M. Thermal sensing and imaging of the dry-sliding contact surface using IR thermomicroscope[C]//Thermosense XVII:An International Conference on Thermal Sensing and Imaging Diagnostic Applications. Bellingham, USA, 1995:263-272.
[28] 王承鹤. 塑料摩擦学:塑料的摩擦、磨损、润滑理论与实践[M]. 北京:机械工业出版社, 1994. WANG C H. Plastic tribology:Theory and practice of plastic friction, wear and lubrication[M]. Beijing:China Machine Press, 1994. (in Chinese)
[29] HARRIS K L, PITENIS A A, SAWYER W G, et al. PTFE tribology and the role of mechanochemistry in the development of protective surface films[J]. Macromolecules, 2018:48(11):3739-3745.
[30] ZAITSEV A L. Investigation of HDPE wear debris formed by friction against metal surfaces with different oxide film content[J]. Wear, 1997, 210(1-2):96-103.
[31] GENT A N, RODGERS W R. Mechanochemical reactions of elastomers with metals[J]. Journal of Polymer Science:Polymer Chemistry Edition, 1985, 23(3):829-841.
[32] THEILER G E. Polymer composites for tribological applications in hydrogen environment[C]//2nd International Conference on Hydrogen Safety. San Sebastián, Spain, 2007:1-9.
[33] BHUSHAN B. Modern tribology handbook[M]. Boca Raton, USA:CRC Press, 2000.
[34] GOROKHOVSKII G A, CHERNENKO P A, SMIRNOV V A. Effect of polymers on the abrasive dispersion of carbon steel[J]. Soviet Materials Science, 1974, 8(5):557-560.
[35] LI X Y, DONG H Q, SHI W. New insights into wear of Ti6Al4V by ultra-high molecular weight polyethylene under water lubricated conditions[J]. Wear, 2001, 250(1-12):553-560.
[36] GINZBURG B M, TOCHIL'NIKOV D G, SHIBAEV L A. Effect of chemical composition of metal counterbodies on wear of carbon plastics with polymer matrix at water lubrication[J]. Journal of Friction and Wear, 2007, 28:286-291.
[37] EVDOKIMOV Y A, SANCHES S S, SUKHORUKOV N A. Effect of the surface activity of polymers during degradation on the friction and wear of plastic-metal and metal-metal pairs[J]. Polymer Mechanics, 1973, 9(3):460-466.
[38] 陈兆彬. 聚酰胺共混物及其复合材料摩擦学性能的研究[D]. 上海:复旦大学, 2005. CHEN Z B. Tribological properties of polyamide blends and their composite[D]. Shanghai:Fudan University, 2005. (in Chinese)
[39] MCKELLOP H, CLARKE I C, MARKOLF K L, et al. Wear characteristics of UHMW polyethylene:A method for accurately measuring extremely low wear rates[J]. Journal of Biomedical Materials Research, 1978, 12(6):895-927.
[40] MCKELLOP H, CLARKE I, MARKOLF K, et al. Friction and wear properties of polymer, metal, and ceramic prosthetic joint materials evaluated on a multichannel screening device[J]. Journal of Biomedical Materials Research, 1981, 15(5):619-653.
[41] KUMAR P, OKA M, IKEUCHI K, et al. Low wear rate of UHMWPE against zirconia ceramic (Y-PSZ) in comparison to alumina ceramic and SUS 316L alloy[J]. Journal of Biomedical Materials Research, 1991, 25(7):813-828.
[42] POGGIE R A, WERT J J, MISHRA A K, et al. Friction and wear characterization of UHMWPE in reciprocating sliding contact with Co-Cr, Ti-6Al-4V, and zirconia implant bearing surfaces[M]//DENTON R, KESHAVAN M. Wear and friction of elastomers. West Conshohocken, USA:ASTM International, 1992:65-81.
[43] MCKELLOP H. Wear of artificial joint materials II:Twelve-channel wear-screening device:Correlation of experimental and clinical results[J]. Engineering in Medicine, 1981, 10(3):123-136.
[44] 刘广建. 超高分子量聚乙烯[M]. 北京:化学工业出版社, 2001. LIU G J. UHMWPE[M]. Beijing:Chemical Industry Press, 2001. (in Chinese)
[45] DAVIM J P. Wear of advanced materials[M]. London, UK:ISTE, 2013.
[46] YAMAGUCHI Y, KENNEDY F K, BLANCHET T A. Tribology of plastic materials[J]. Journal of Tribology, 1991, 113(2):414.
[47] TANAKA K, MIYATA T. Studies on the friction and transfer of semicrystalline polymers[J]. Wear, 1977, 41(2):383-398.
[48] ZHANG G K, WETZEL B, WANG Q H. Tribological behavior of PEEK-based materials under mixed and boundary lubrication conditions[J]. Tribology International, 2015, 88:153-161.
[49] ARNELL R D, SOLIMAN F A. The effects of speed, film thickness and substrate surface roughness on the friction and wear of soft metal films in ultrahigh vacuum[J]. Thin Solid Films, 1978, 53(3):333-341.
[50] EL-DOMIATY A, EL-FADALY M, ES NASSEF A. Wear characteristics of ultrahigh molecular weight polyethylene (UHMWPE)[J]. Journal of Materials Engineering and Performance, 2002, 11(5):577-583.
[51] KANDEMIR G, SMITH S, JOYCE T J. Wear behaviour of CFR PEEK articulated against CoCr under varying contact stresses:Low wear of CFR PEEK negated by wear of the CoCr counterface[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2019, 97:117-125.
[52] ZHANG Z X, JIA X H, GUO F, et al. Effect of contact forms on the wear of hard silicon surfaces by soft polymers[J/OL]. Friction, 2020. https://link.springer.com/article/10.1007/s40544-020-0375-2. DOI:10.1007/s40544-020-0375-2.
[53] VINOGRADOV G V, BARTENEV G M, EL'KIN A L, et al. Effect of temperature on friction and adhesion of crystalline polymers[J]. Wear, 1970, 16(3):213-219.
[54] SHOOTER K V, THOMAS P H. Frictional properties of some plastics[J]. Research:A Journal of Science and Its Applications, 1949, 2(11):533-535.
[55] GROSCH K A. Visco-elastic properties and the friction of solids:Relation between the friction and visco-elastic properties of rubber[J]. Nature, 1963, 197(4870):858-859.
[56] QU J, BLAU P J, WATKINS T R, et al. Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces[J]. Wear, 2005, 258(9):1348-1356.
[57] FRIEDRICH K, KARGER-KOCSIS J, LU Z. Effects of steel counterface roughness and temperature on the friction and wear of PE(E)K composites under dry sliding conditions[J]. Wear, 1991, 148(2):235-247.
[58] HANCHI J, EISS JR N S. Tribological behavior of polyetheretherketone, a thermotropic liquid crystalline polymer and in situ composites based on their blends under dry sliding conditions at elevated temperatures[J]. Wear, 1996, 200(1-2):105-121.
[59] HANCHI J, EISS JR N S. Dry sliding friction and wear of short carbon-fiber-reinforced polyetheretherketone (PEEK) at elevated temperatures[J]. Wear, 1997, 203-204:380-386.
[60] ETTLES C M M. Polymer and elastomer friction in the thermal control regime[J]. A S L E Transactions, 1987, 30(2):149-159.
[61] STIFFLER A K. Friction and wear with a fully melting surface[J]. Journal of Tribology, 1984, 106(3):416-419.
[62] ETTLES C C M. The thermal control of friction at high sliding speeds[J]. Journal of Tribology, 1986, 108(1):98-104.
[63] KURDI A, KAN W H, CHANG L. Tribological behaviour of high performance polymers and polymer composites at elevated temperature[J]. Tribology International, 2019, 130:94-105.
[64] POGA AČG NIK A, KALIN M. Parameters influencing the running-in and long-term tribological behaviour of polyamide (PA) against polyacetal (POM) and steel[J]. Wear, 2012, 290-291:140-148.
[65] TAKADOUM J. Materials and surface engineering in tribology[M]. London, UK:John Wiley & Sons, 2008.
