Low-velocity impact behavior of carbon-Kevlar fiber intraply hybrid composites

Xing LI; Hao WU; Mengqi YUAN

doi:10.16511/j.cnki.qhdxxb.2025.22.016

PDF(25968 KB)

Journal of Tsinghua University(Science and Technology) ›› 2025, Vol. 65 ›› Issue (6) : 1060-1069. DOI: 10.16511/j.cnki.qhdxxb.2025.22.016

Public Safety

Low-velocity impact behavior of carbon-Kevlar fiber intraply hybrid composites

Xing LI ¹ ,
Hao WU ¹^,* ,
Mengqi YUAN ¹^,²

Author information +

History +

Abstract

Objective: An important issue that fiber-reinforced composites face in applications is their sensitivity to low-velocity impact. Low-velocity impact not only causes material penetration and perforation but also introduces internal damage in the forms of delamination, matrix cracking, and fiber breakage. This reduces the damage tolerance of fiber-reinforced composites, posing a potential threat to their protective performance. The research objective of this paper is to enhance the impact resistance through fiber hybridization and to explore the influence of the fabric structure on the impact resistance of carbon-Kevlar fiber intraply hybrid composites. Methods: In this study, carbon-Kevlar fiber intraply hybrid composites with different fabric structures were fabricated using the vacuum assisted resin infusion (VARI) process. Through low-velocity impact tests using a drop hammer under 30- and 60-J energy, the reinforcement effect of intraply hybridization on the composites and the influence of the fabric structures on the mechanical properties and impact resistance of carbon-Kevlar fiber intraply hybrid composites were investigated. Low-velocity impact was simulated through an impact simulation model of hybrid fiber composites, and the damage mechanism of the specimens under impact loads was explored. The impact response behaviors and impact resistance of each specimen were comparatively analyzed using the load - displacement, load - time, and energy - time curves. Results: Results show that: (1) At an energy of 30 J, the specimen with the maximum peak load is the plain warp carbon weft Kevlar (P-CC/KK) specimen, reaching 3.30 kN, which is 72.77% and 106.25% higher than the maximum peak loads of plain carbon (P-C) and twill warp carbon weft Kevlar (T-CC/KK) specimens (with the minimum peak load), respectively. At an energy of 60 J, the specimen with the maximum peak load is also P-CC/KK, reaching 3.68 kN, which is 97.85% higher than the maximum peak load of the P-C specimen (with the minimum peak load). (2) Comparing the maximum deflection of rebounded specimens, the T-CC/KK specimen has the largest deflection at 30- and 60-J energy, reaching 24.74 and 31.92 mm, respectively. (3) From the energy absorption curve, the energy absorption of the hybrid specimens is significantly increased compared with that of P-C. At an energy of 30 J, the plain carbon-Kevlar alternate (P-CK/CK) specimen just stops the impactor, absorbing the most energy of 29.54 J, which is 132% higher than the energy absorbed by P-C. At an energy of 60 J, the T-CC/KK specimen absorbs the most energy of 59.65 J, which is 324% higher than the energy absorbed by P-C, suffering greater bending deformation and internal damage. (4) The low-velocity impact simulation study based on the finite element model on the P-CC/KK specimens shows that the load - time and load - displacement curves from the tests and simulation results have a high degree of consistency, and errors in the peak loads of the curves and maximum deflections of the specimens are less than 10%. Conclusions: The low-velocity impact resistance of the carbon-Kevlar hybrid composites is significantly improved compared to that of pure carbon fiber. The energy absorption of the hybrid specimens is greatly enhanced compared to that of P-C. During impact, P-CC/KK has the highest peak load and T-CC/KK has the largest deflection. The warp carbon weft Kevlar (CC/KK) structure has better impact resistance than the carbon-Kevlar alternate (CK/CK) structure, and the plain weave structure has superior low-velocity impact resistance compared to the twill weave structure. The established finite element model has relatively high accuracy, and the numerical simulation model well reflects the in-plane damage of the composites under the nonpenetration condition.

Key words

fiber intraply hybrid composites / fabric structure / peak load / low-velocity impact

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

Xing LI , Hao WU , Mengqi YUAN. Low-velocity impact behavior of carbon-Kevlar fiber intraply hybrid composites[J]. Journal of Tsinghua University(Science and Technology). 2025, 65(6): 1060-1069 https://doi.org/10.16511/j.cnki.qhdxxb.2025.22.016

References

List( Publishing order | Descend order by publishing year | Descend order by cited within ) Chart analysis

JIANG

H Y

, LIU

X F

, JIANG

S L

, et al. Hybrid effects and interactive failure mechanisms of hybrid fiber composites under flexural loading: Carbon/Kevlar, carbon/glass, carbon/glass/ Kevlar[J]. Aerospace Science and Technology, 2023, 133, 108105.

https://doi.org/10.1016/j.ast.2023.108105

Cited in this article [1]

2	NEGAWO T A , POLAT Y , AKGUL Y , et al. Mechanical and dynamic mechanical thermal properties of ensete fiber/woven glass fiber fabric hybrid composites[J]. Composite Structures, 2021, 259, 113221. https://doi.org/10.1016/j.compstruct.2020.113221

3	PEGORETTI A , FABBRI E , MIGLIARESI C , et al. Intraply and interply hybrid composites based on E-glass and poly(vinyl alcohol) woven fabrics: tensile and impact properties[J]. Polymer International, 2004, 53 (9): 1290- 1297. https://doi.org/10.1002/pi.1514 Cited in this article [2]

4	SARASINI F , TIRILLÒ J , VALENTE M , et al. Hybrid composites based on aramid and basalt woven fabrics: Impact damage modes and residual flexural properties[J]. Materials & Design, 2013, 49, 290- 302. https://doi.org/10.3969/j.issn.1006-2890.2013.03.179 Cited in this article [1]

5	WANG M L , PAN Z X , WU Z Y , et al. Effect of carbon/Kevlar asymmetric hybridization ratio on the low-velocity impact response of plain woven laminates[J]. Composite Structures, 2021, 276, 114574. https://doi.org/10.1016/j.compstruct.2021.114574 Cited in this article [1]

6	NISINI E , SANTULLI C , LIVERANI A . Mechanical and impact characterization of hybrid composite laminates with carbon, basalt and flax fibres[J]. Composites Part B: Engineering, 2017, 127, 92- 99. https://doi.org/10.1016/j.compositesb.2016.06.071 Cited in this article [1]

7	杨猛. 面向汽车轻量化的复合材料损伤机理及混杂设计方法研究[D]. 长春: 吉林大学, 2020. YANG M. Research on damage mechanism and hybrid design of composites for automotive lightweight [D]. Changchun: Jilin University, 2020. (in Chinese) Cited in this article [1]

8	AKHBARI M , SHOKRIEH M M , NOSRATY H , et al. A study on buckling behavior of composite sheets reinforced by hybrid woven fabrics[J]. Transactions of the Canadian Society for Mechanical Engineering, 2008, 32 (1): 81- 90. https://doi.org/10.1139/tcsme-2008-0006 Cited in this article [1]

9	DEHKORDI M T , NOSRATY H , SHOKRIEH M M , et al. Low velocity impact properties of intra-ply hybrid composites based on basalt and nylon woven fabrics[J]. Materials & Design, 2010, 31 (8): 3835- 3844. Cited in this article [1]

10	VALENÇA S L , GRIZA S , DE OLIVEIRA V G , et al. Evaluation of the mechanical behavior of epoxy composite reinforced with Kevlar plain fabric and glass/Kevlar hybrid fabric[J]. Composites Part B: Engineering, 2015, 70, 1- 8. Cited in this article [1]

11	ZHAO Y , CAO M , TAN H X , et al. Hybrid woven carbon-Dyneema composites under drop-weight and steel ball impact[J]. Composite Structures, 2020, 236, 111811. https://doi.org/10.1016/j.compstruct.2019.111811 Cited in this article [2]

12	HU Y , LIU D S , GUO J , et al. Low-velocity impact damage research on 2-dimentional UHMWPE/CF hybrid woven laminates under preloading[J]. Thin-Walled Structures, 2021, 161, 107472. https://doi.org/10.1016/j.tws.2021.107472 Cited in this article [1]

13	HU Y , SHI Y Y , LIU D S , et al. Damage tolerance of 2-dimentional UHMWPE/CF hybrid woven laminates subjected to low-velocity impact[J]. Materials & Design, 2020, 191, 108604. Cited in this article [4]

14	张辰. 碳/玻单向经编混杂复合材料抗冲击性能及损伤机理研究[D]. 上海: 东华大学, 2021. ZHANG C. Study on impact resistance properties and damage mechanism of carbon/glass unidirectional warp knitted hybrid composites [D]. Shanghai: Donghua University, 2021. (in Chinese) Cited in this article [1]

15	ENGLISH S A , BRIGGS T M , NELSON S M . Quantitative validation of carbon-fiber laminate low velocity impact simulations[J]. Composite Structures, 2016, 135, 250- 261. https://doi.org/10.1016/j.compstruct.2015.09.033 Cited in this article [2]

16	BAO J W , WANG Y W , AN R , et al. Investigation of the mechanical and ballistic properties of hybrid carbon/aramid woven laminates[J]. Defence Technology, 2022, 18 (10): 1822- 1833. https://doi.org/10.1016/j.dt.2021.09.009

17	SHAO J R , LIU N , ZHENG Z J . Numerical comparison between Hashin and Chang-Chang failure criteria in terms of inter-laminar damage behavior of laminated composite[J]. Materials Research Express, 2021, 8 (8): 085602. https://doi.org/10.1088/2053-1591/ac1d40 Cited in this article [1]

18	KARTHICK P , RAMAJEYATHILAGAM K . Numerical study on ballistic impact behavior of hybrid composites[J]. Materials Today: Proceedings, 2022, 59, 995- 1003. https://doi.org/10.1016/j.matpr.2022.02.270 Cited in this article [1]

19	LI N , CHEN P H . Micro-macro FE modeling of damage evolution in laminated composite plates subjected to low velocity impact[J]. Composite Structures, 2016, 147, 111- 121. https://doi.org/10.1016/j.compstruct.2016.02.063 Cited in this article [1]

20	LIU H B , LIU J , DING Y Z , et al. A three-dimensional elastic-plastic damage model for predicting the impact behaviour of fibre-reinforced polymer-matrix composites[J]. Composites Part B: Engineering, 2020, 201, 108389. https://doi.org/10.1016/j.compositesb.2020.108389 Cited in this article [1]

SHAH

S Z H

, MEGAT-YUSOFF

P S M

, KARUPPANAN

, et al. Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading[J]. International Journal of Mechanical Sciences, 2021, 189, 105984.

https://doi.org/10.1016/j.ijmecsci.2020.105984

Cited in this article [3]

22	郝裕兴. 二维编织玄武岩纤维复合材料弯曲及低速冲击性能研究[D]. 长春: 吉林大学, 2020. HAO Y X. Study on bending and low velocity impact properties of 2D woven basalt fiber composites [D]. Changchun: Jilin University, 2020. (in Chinese) Cited in this article [1]

23	FRAGASSA C , DE CAMARGO F V , PAVLOVIC A , et al. Explicit numerical modeling assessment of basalt reinforced composites for low-velocity impact[J]. Composites Part B: Engineering, 2019, 163, 522- 535. https://doi.org/10.1016/j.compositesb.2019.01.013 Cited in this article [1]