[1] TAN C M, RAGHAVAN N. A framework to practical predictive maintenance modeling for multi-state systems[J]. Reliability Engineering & System Safety, 2008, 93(8):1138-1150.
[2] ZHAO Y X. On preventive maintenance policy of a critical reliability level for system subject to degradation[J]. Reliability Engineering & System Safety, 2003, 79(3):301-308.
[3] HESS A, FILA L, editors. The joint strike fighter (JSF) PHM concept:Potential impact on aging aircraft problems[C]//Proceedings of 2002 IEEE Aerospace Conference. Big Sky, USA:IEEE Press, 2002:3021-3026.
[4] 谷振宇, 何彦, 刘军. 基于运行信息融合的大型设备视情维修系统[J]. 计算机集成制造系统, 2010, 16(10):2094-2100. GU Z Y, HE Y, LIU J. Condition-based maintenance system for large equipment based on running information fusion[J]. Computer Integrated Manufacturing Systems, 2010, 16(10):2094-2100. (in Chinese)
[5] HAMEED Z, HONG Y S, CHO Y M, et al. Condition monitoring and fault detection of wind turbines and related algorithms:A review[J]. Renewable & Sustainable Energy Reviews, 2009, 13(1):1-39
[6] AMIRAT Y, BENBOUZID M E H, AL-AHMAR E, et al. A brief status on condition monitoring and fault diagnosis in wind energy conversion systems[J]. Renewable & Sustainable Energy Reviews, 2009, 13(9):2629-2636
[7] CRABTREE C J, FENG Y, TAVNER P J. Detecting incipient wind turbine gearbox failure:A signal analysis method for on-line condition monitoring[J]. Journal of Organic Chemistry, 2010, 75(18):6122-6140.
[8] 赵洪山, 胡庆春, 李志为. 基于统计过程控制的风机齿轮箱故障预测[J]. 电力系统保护与控制, 2012, 40(13):67-73. ZHAO H S, HU Q C, LI Z W. Failure prediction of wind turbine gearbox based on statistical process control[J]. Power System Protection and Control, 2012, 40(13):67-73. (in Chinese)
[9] 郭鹏, Infield D, 杨锡运. 风电机组齿轮箱温度趋势状态监测及分析方法[J]. 中国电机工程学报, 2011, 31(32):129-136. GUO P, INFIELD D, YANG X Y. Wind turbine gearbox condition monitoring using temperature trend analysis[J]. Proceedings of the CSEE, 2011, 31(32):129-136. (in Chinese)
[10] 姚万业, 邸帅, 宋鹏, 等. 考虑样本优化的风电机组齿轮箱轴承故障预测[J]. 华北电力技术, 2017, (4):44-49.YAO W Y, DI S, SONG P, et al. Wind turbine gearbox bearing fault prediction with sample optimization[J]. North China Electric Power, 2017, (4):44-49. (in Chinese)
[11] 曾承志, 姚兴佳, 唐德尧, 等. 基于改进型HMM的风电机组齿轮箱故障预测[J]. 太阳能学报, 2016, 37(4):1017-1023. ZENG C Z, YAO X J, TANG D Y, et al. Fault prediction of the gearbox of wind turbine based on improved HMM[J]. Acta Energiae Solaris Sinica, 2016, 37(4):1017-1023. (in Chinese)
[12] 顾煜炯, 宋磊, 徐天金, 等. 变工况条件下的风电机组齿轮箱故障预警方法[J]. 中国机械工程, 2014, 25(10):1346-1351. GU Y J, SONG L XU T J, et al. Research on wind turbine gearbox fault warning method under variable working conditions[J]. China Mechanical Engineering, 2014, 25(10):1346-1351. (in Chinese)
[13] 肖成, 刘作军, 张磊. 基于SCADA系统的风电变桨故障预测方法研究[J]. 可再生能源, 2017, 35(2):278-284.XIAO C, LIU Z J, ZHANG L. Research on fault prediction method of wind power variable propeller based on SCADA system[J]. Renewable Energy Resources, 2017, 35(2):278-284. (in Chinese)
[14] 肖成, 焦智, 孙介涛, 等. 基于小波BP神经网络的风电机组变桨系统故障预测[J]. 可再生能源, 2017, 35(6):893-899. XIAO C, JIAO Z, SUN J T, et al. Fault prediction of variable propeller system of wind turbine based on wavelet BP neural network[J]. Renewable Energy Resources, 2017, 35(6):893-899. (in Chinese)
[15] 宁少华. 基于数据的风电机组故障趋势预测方法研究[D]. 北京:华北电力大学, 2015.NING S H. Research on fault trend prediction method of wind turbine based on data[D]. Beijing:North China Electric Power University, 2015. (in Chinese)
[16] 顾煜炯, 苏璐玮, 钟阳, 等. 基于区间划分的风电齿轮箱在线故障预警方法[J]. 电力科学与工程, 2014, 30(8):1-5.GU Y J, SU L W, ZHONG Yang, et al. On line fault early warning method for wind power gear box based on interval division[J]. Electric Power Science and Engineering, 2014, 30(8):1-5. (in Chinese)
[17] 姚万业, 杨金彭. 一种基于区间划分的风机故障预警方法[J]. 可再生能源, 2016, 34(6):861-866.YAO W Y, YANG J P. A fault early warning method for wind turbines based on interval division[J]. Renewable Energy Resources, 2016, 34(6):861-866. (in Chinese)
[18] 张小田. 基于回归分析的风机主要部件的故障预测方法研究[D]. 北京:华北电力大学, 2013.ZHANG X T. Research on fault prediction of turbine main components based on regression analysis[D]. Beijing:North China Electric Power University, 2013. (in Chinese)
[19] 彭宇, 刘大同. 数据驱动故障预测和健康管理综述[J]. 仪器仪表学报, 2014, 35(3):481-495.PENG Y, LIU D T. Data-driven prognostics and health management:A review of recent advances[J]. Chinese Journal of Scientific Instrument, 2014, 35(3):481-495. (in Chinese)
[20] BELHUMEUR P N, HESPANHA J P, KRIEGMAN D J. Eigenfaces vs. fisherfaces:Recognition using class specific linear projection[J]. IEEE Transactions on Pattern Analysis & Machine Intelligence, 2002, 19(7):711-720.
[21] SUN W, CHEN J, LI J. Decision tree and PCA-based fault diagnosis of rotating machinery[J]. Mechanical Systems & Signal Processing, 2007, 21(3):1300-1317.
[22] 张若青, 裘丽华. 基于动态神经网络的液压伺服系统故障检测[J]. 机械工程学报, 2002, 38(3):46-49.ZHANG R Q, QIU L H. Fault detection of hydraulic servo system based on dynamic neural network[J]. Journal of Mechanical Engineering, 2002, 38(3):46-49. (in Chinese)
[23] 赵晨. 动态神经网络在量化投资预测中的应用[D]. 上海:复旦大学, 2014.ZHAO C. Application of dynamic neural network in quantitative investment forecast[D]. Shanghai:Fudan University, 2014. (in Chinese)
[24] 郭秀才, 尚赛花. 基于三次收敛LM算法的神经网络研究[J]. 计算机应用与软件, 2014, 31(1):271-274.GUO X C, SHANG S H. Neural network research based on cubic convergent LM algorithm[J]. Computer Applications and Software, 2014, 31(1):271-274. (in Chinese)
[25] ALAEDDINI A, DOGAN I. Using Bayesian networks for root cause analysis in statistical process control[J]. Expert Systems with Applications, 2011, 38(9):11230-11243.
[26] 崔敬巍, 谢里阳. 基于贝叶斯动态模型的自相关控制图[J]. 北京航空航天大学学报, 2007, 33(3):375-378.CUI J W, XIE L Y. Auto-correlated charts based on dynamic Bayesian model[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(3):375-378. (in Chinese)
[27] 郑昊. 统计过程控制(SPC)在精密连接器生产过程中的应用[D]. 西安:西安电子科技大学, 2009.ZHENG H. The application of SPC (Statistical Process Control) in the produce process of precision connector[D]. Xi'an:Xidian University, 2009. (in Chinese)
[28] 杨军, 梅雪松, 冯斌, 等. 时序分析在电主轴热误差建模中的应用[J]. 计算机集成制造系统, 2015, 21(5):1359-1367.YANG J, MEI X S, FENG B, et al. Application of time series analysis in thermal error modeling of motorized spindle[J]. Computer Integrated Manufacturing Systems, 2015, 21(5):1359-1367. (in Chinese)
