[1] IBRAHIM R A, PETTIT C L. Uncertainties and dynamic problems of bolted joints and other fasteners[J]. Journal of Sound and Vibration, 2005, 279(3-5):857-936.
[2] 叶佩青, 王仁彻, 赵彤, 等. 机床整机动态特性研究进展[J]. 清华大学学报(自然科学版), 2012, 52(12):1758-1763. YE P Q, WANG R C, ZHAO T, et al. Recent research advances of whole machine tool dynamics[J]. Journal of Tsinghua University (Science and Technology), 2012, 52(12):1758-1763. (in Chinese)
[3] 蔡力钢, 王峰, 李玲, 等. 栓接结合部动态特性研究进展[J]. 机械工程学报, 2013, 49(9):158-168. CAI L G, WANG F, LI L, et al. Review on dynamic properties of bolted joints[J]. Journal of Mechanical Engineering, 2013, 49(9):158-168. (in Chinese)
[4] ČELIČ D, BOLTEŽAR M. Identification of the dynamic properties of joints using frequency-response functions[J]. Journal of Sound and Vibration, 2008, 317(1-2):158-174.
[5] 董冠华, 殷勤, 殷国富, 等. 机床结合部动力学建模与辨识方法的研究[J]. 机械工程学报, 2016, 52(5):162-168. DONG G H, YIN Q, YIN G F, et al. Research on dynamics modeling and identification of machine tool joints[J]. Journal of Mechanical Engineering, 2012, 52(5):162-168. (in Chinese)
[6] 张辉, 于长亮, 王仁彻, 等. 机床支撑地脚结合部参数辨识方法[J]. 清华大学学报(自然科学版), 2014, 54(6):815-821. ZHANG H, YU C L, WANG R C, et al. Parameters identification method for machine tool support joints[J]. Journal of Tsinghua University (Science and Technology), 2014, 54(6):815-821. (in Chinese)
[7] 张学良, 范世荣, 温淑花, 等. 基于等效横观各向同性虚拟材料的固定结合部建模方法[J]. 机械工程学报, 2017, 53(15):141-147. ZHANG X L, FAN S R, WEN S H, et al. Modeling method of fixed joint interfaces based on equivalent transversely isotropic virtual material[J]. Journal of Mechanical Engineering, 2017, 53(15):141-147. (in Chinese)
[8] 孙清超, 黄庆涛, 孙志勇, 等. 基于梯度虚拟材料的栓接结合部连接参数表征[J]. 机械工程学报, 2018, 54(11):102-109.SUN Q C, HUANG Q T, SUN Z Y, et al. Interface parameter identification of bolted connections based on gradient virtual material[J]. Journal of Mechanical Engineering, 2018, 54(11):102-109. (in Chinese)
[9] 李玲, 蔡力钢, 蔡安江, 等. 不同预紧力下栓接结合部切向等效特性[J]. 振动、测试与诊断, 2013, 33(1):82-87. LI L, CAI L G, CAI A J, et al. Tangential equivalent properties of the bolted joints in different preload[J]. Journal of Vibration, Measurement & Diagnosis, 2013, 33(1):82-87. (in Chinese)
[10] WANG M, WANG D, ZHENG G T. Joint dynamic properties identification with partially measured frequency response function[J]. Mechanical Systems and Signal Processing, 2012, 27:499-512.
[11] 陈学前, 杜强, 冯加权. 螺栓连接非线性振动特性研究[J]. 振动与冲击, 2009, 28(7):196-198. CHEN X Q, DU Q, FENG J Q. Nonlinear vibrational characteristic of bolt-joints[J]. Journal of Vibration and Shock, 2009, 28(7):196-198. (in Chinese)
[12] 蔡力钢, 李玲, 郭铁能, 等. 基于力状态映射法辨识非线性结合部动态参数[J]. 机械工程学报, 2011, 47(7):65-72. CAI L G, LI L, GUO T N, et al. Identification of nonlinear joint parameters with force-state mapping method[J]. Journal of Mechanical Engineering, 2011, 47(7):65-72. (in Chinese)
[13] 孙伟, 李星占, 韩清凯. 螺栓联接梁结构结合部非线性特性参数辨识[J]. 振动工程学报, 2013, 26(2):185-191. SUN W, LI X Z, HAN Q K. Nonlinear joint parameter identification for bolted beam structure[J]. Journal of Vibration Engineering, 2013, 26(2):185-191. (in Chinese)
[14] WORDEN K, TOMLINSON G R. Nonlinearity in structural dynamics:Detection, identification, and modeling[M]. Bristol:Institute of Physics Publishing, 2001.
[15] MASRI S F, CAUGHEY T K. A nonparametric identification technique for nonlinear dynamic problems[J]. Journal of Applied Mechanics, 1979, 46(2):433-447.
[16] CRAWLEY E F, O'DONNELL K J. Force-state mapping identification of nonlinear joints[J]. AIAA Journal, 1987, 25(7):1003-1010.
[17] CRAWLEY E F, AUBERT A C. Identification of nonlinear structural elements by force-state mapping[J]. AIAA Journal, 1986, 24(1):155-162.
