Accuracy evaluation and correction of the element integration based on a geometric index in the boundary element method

HUANG Junhao; CHEN Yongqiang

doi:10.16511/j.cnki.qhdxxb.2019.22.012

Journal of Tsinghua University(Science and Technology) >

2019 , Vol. 59 >Issue 11: 953 - 960

DOI: https://doi.org/10.16511/j.cnki.qhdxxb.2019.22.012

ENGINEERING MECHANICS

Accuracy evaluation and correction of the element integration based on a geometric index in the boundary element method

HUANG Junhao ,
CHEN Yongqiang

Expand

Department of Mechanics and Engineering Science, College of Engineering, Peking University, Beijing 100871, China

Received date: 2018-12-24

Online published: 2019-11-19

Fold

Abstract

This paper presents a scheme to evaluate the element integration accuracy for the boundary element method based on a singular geometric index to improve the accuracy of the final solution. The singular geometric index is defined as the ratio of the shortest distance from the source point to the integral element to the element length. For a discretized boundary mesh, the upper bound of the quadrature error is used to obtain the relationship between the singular geometric index and the element integration accuracy with the integrated accuracies of all the elements estimated from the node geometries. Furthermore, the maximum relative error of the solution which is a global precision index is estimated from the matrix error transfer formula. If the index is larger than a threshold, some of the element integrals are not accurate and should be corrected to improve the solution accuracy. This method uses the sinh transformation method to correct the element integrals of low accuracy elements. Numerical results show that this method can guarantee the accuracy of the overall stiffness matrix coefficient of the boundary element method and the final solution accuracy using only the geometric node information. This scheme does not need to change the original calculation, requires little additional computational cost, and can be easily implemented.

Key words： boundary element method; element integral accuracy; geometric index; accuracy correction; sinh transformation

Cite this article

HUANG Junhao , CHEN Yongqiang . Accuracy evaluation and correction of the element integration based on a geometric index in the boundary element method[J]. Journal of Tsinghua University(Science and Technology), 2019 , 59(11) : 953 -960 . DOI: 10.16511/j.cnki.qhdxxb.2019.22.012

References

[1] BREBBIA C A, TELLES J C F, WROBEL L C. Boundary element techniques[M]. Berlin, Germany:Springer-Verlag, 1984.
[2] ALIABADI M H. The boundary element method:Applications in solid and structures[M]. Chichester, UK:Wiley, 2002.
[3] 姚振汉, 王海涛. 边界元法[M]. 北京:高等教育出版社, 2010. YAO Z H, WANG H T. Boundary element methods[M]. Beijing:Higher Education Press, 2010. (in Chinese)
[4] YAO Z H. A new type of high-accuracy BEM and local stress analysis of real beam, plate and shell structures[J]. Engineering Analysis with Boundary Elements, 2016, 65:1-17.
[5] ZALEWSKI B F, MULLEN R L. Worst case bounds on the point-wise discretization error in boundary element method for the elasticity problem[J]. Computer Methods in Applied Mechanics and Engineering, 2009, 198(37-40):2996-3005.
[6] KITA E, KAMIYA N. Error estimation and adaptive mesh refinement in boundary element method, an overview[J]. Engineering Analysis with Boundary Elements, 2001, 25(7):479-495.
[7] MADDI J R, VABLE M. Anhpr-mesh refinement algorithm for BEM[J]. Engineering Analysis with Boundary Elements, 2010, 34(6):549-556.
[8] YAO Z H, WANG H T. Some benchmark problems and basic ideas on the accuracy of boundary element analysis[J]. Engineering Analysis with Boundary Elements, 2013, 37(12):1674-1692.
[9] 姚振汉. 真实梁板壳局部应力分析的高性能边界元法[C]//第23届全国结构工程学术会议论文集. 兰州, 2014. YAO Z H. High-performance boundary element method for the local stress analysis of real beam, plate and shell[C]//Proceedings of 23rd National Conference on Structural Engineering. Lanzhou, China, 2014. (in Chinese)
[10] MA H, KAMIYA N. Domain supplemental approach to avoid boundary layer effect of BEM in elasticity[J]. Engineering Analysis with Boundary Elements, 1999, 23(3):281-284.
[11] HIGASHIMACHI T, OKAMOTO N, EZAWA Y, et al. Interactive structural analysis system using the advanced boundary element method[C]//Proceedings of the 5th International Conference on BEM. Hiroshima, Japan, 1983:847-856.
[12] ZHOU H L, NIU Z R, CHENG C Z, et al. Analytical integral algorithm applied to boundary layer effect and thin body effect in BEM for anisotropic potential problems[J]. Computers & Structures, 2008, 86(15-16):1656-1671.
[13] 张耀明, 刘召颜, 谷岩, 等. 二维弹性问题边界元法中边界层效应问题的变换法[J]. 计算力学学报, 2010, 27(5):775-780. ZHANG Y M, LIU Z Y, GU Y, et al. A transformation algorithm applied to boundary layer effect in BEM for elastic plane problems[J]. Journal of Computational Mechanics, 2010, 27(5):775-780. (in Chinese)
[14] 胡宗军. 边界元法中高阶单元奇异积分的一个新正则化算法及其应用研究[D]. 合肥:合肥工业大学, 2012. HU Z J. Study on a novel regularization algorithm of singular integrals in boundary element methods with high-order elements and its applications[D]. Hefei, China:Hefei University of Technology, 2012. (in Chinese)
[15] LIU Y J, FAN H. Analysis of thin piezoelectric solids by the boundary element method[J]. Computer Methods in Applied Mechanics and Engineering, 2002, 191(21-22):2297-2315.
[16] ZHANG Y M, GU Y, CHEN J T. Boundary element analysis of the thermal behaviour in thin-coated cutting tools[J]. Engineering Analysis with Boundary Elements, 2010, 34(9):775-784.
[17] ZHANG Y M, GU Y, CHEN J T. Boundary element analysis of 2D thin walled structures with high-order geometry elements using transformation[J]. Engineering Analysis with Boundary Elements, 2011, 35(3):581-586.
[18] ZHANG Y M, GU Y, CHEN J T. Internal stress analysis for single and multilayered coating systems using the boundary element method[J]. Engineering Analysis with Boundary Elements, 2011, 35(4):708-717.
[19] PORTELA A, ALIABADI M H, ROOKE D P. The dual boundary element method:Effective implementation for crack problems[J]. International Journal for Numerical Methods in Engineering, 1992, 33(6):1269-1287.
[20] AOUR B, RAHMANI O, NAIT-ABDELAZIZ M. A coupled FEM/BEM approach and its accuracy for solving crack problems in fracture mechanics[J]. International Journal of Solids and Structures, 2007, 44(7-8):2523-2539.
[21] 胡宗军, 牛忠荣, 程长征, 等. 二维位势边界元法高阶单元几乎奇异积分半解析算法[J]. 计算力学学报, 2014, 31(6):763-768, 798. HU Z J, NIU Z R, CHENG C Z, et al. A novel semi-analytic algorithm of nearly singular integrals in high order boundary element analysis of 2D potential[J]. Journal of Computational Mechanics, 2014, 31(6):763-768, 798. (in Chinese)
[22] GAO X W, DAVIES T G. Adaptive integration in elasto-plastic boundary element analysis[J]. Journal of the Chinese Institute of Engineers, 2000, 23(3):349-356.
[23] BU S, DAVIES T G. Effective evaluation of non-singular integrals in 3D BEM[J]. Advances in Engineering Software, 1995, 23(2):121-128.
[24] LACHAT J C, WATSON J O. Effective numerical treatment of boundary integral equations:A formulation for three-dimensional elastostatics[J]. International Journal for Numerical Methods in Engineering, 1976, 10(5):991-1005.
[25] MUSTOE G G W. Advanced integration schemes over boundary elements and volume cells for two-and three-dimensional non-linear analysis[M]//BANERJEE P K, MUKHERJEE S. Developments in boundary element methods. Amsterdam, Netherlands:Elsevier, 1984:213-270.
[26] GUIGGIANI M. A self-adaptive co-ordinate transformation for efficient numerical evaluation of general boundary element integrals[J]. International Journal for Numerical Methods in Engineering, 1988, 26(7):1683-1684.
[27] TELLES J C F, OLIVEIRA R F. Third degree polynomial transformation for boundary element integrals:Further improvements[J]. Engineering Analysis with Boundary Elements, 1994, 13(2):135-141.
[28] YUN B I. A non-linear co-ordinate transformation for accurate numerical evaluation of weakly singular integrals[J]. Communications in Numerical Methods in Engineering, 2004, 20(5):401-417.
[29] YUN B I. An extended sigmoidal transformation technique for evaluating weakly singular integrals without splitting the integration interval[J]. SIAM Journal on Scientific Computing, 2003, 25(1):284-301.
[30] JOHNSTON P R. Application of sigmoidal transformations to weakly singular and near-singular boundary element integrals[J]. International Journal for Numerical Methods in Engineering, 1999, 45(10):1333-1348.
[31] ELLIOTT D, JOHNSTON P R. Error analysis for a sinh transformation used in evaluating nearly singular boundary element integrals[J]. Journal of Computational and Applied Mathematics, 2007, 203(1):103-124.
[32] JOHNSTON B M, JOHNSTON P R, ELLIOTT D. A sinh transformation for evaluating two-dimensional nearly singular boundary element integrals[J]. International Journal for Numerical Methods in Engineering, 2007, 69(7):1460-1479.
[33] 胡宗军, 刘翠, 牛忠荣. 三维声场边界元高阶单元几乎奇异积分半解析法[J]. 应用力学学报, 2015, 32(5):743-749. HU Z J, LIU C, NIU Z R. A new semi-analytic algorithm of nearly singular integrals on high order boundary element for 3D acoustic BEM[J]. Chinese Journal of Applied Mechanics, 2015, 32(5):743-749. (in Chinese)
[34] LUO J F, LIU Y J, BERGER E J. Analysis of two-dimensional thin structures (from micro-to nano-scales) using the boundary element method[J]. Computational Mechanics, 1998, 22(5):404-412.
[35] GRANADOS J J, GALLEGO R. Regularization of nearly hypersingular integrals in the boundary element method[J]. Engineering Analysis with Boundary Elements, 2001, 25(3):165-184.
[36] 蒋勇. 线性代数方程组解的稳定性探讨[J]. 华东工程学院学报, 1982(3):189-195. JIANG Y. Discussion on the stability of solution of linear algebraic equations[J]. Journal of East China Institute of Engineering, 1982(3):189-195. (in Chinese)

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References

Visited