YING Shaojun , CHEN Zhitong , LI Jianwei , ZHAO Yue . Coated bolt weakening mechanism and processing improvements[J]. Journal of Tsinghua University(Science and Technology), 2022 , 62(9) : 1539 -1547 . DOI: 10.16511/j.cnki.qhdxxb.2022.22.038

[1] 石秀勇, 李国祥, 胡玉平. 发动机飞轮螺栓的三维有限元计算分析[J]. 中国机械工程, 2006, 17(8): 845-848. SHI X Y, LI G X, HU Y P. 3D finite element analysis on flywheel bolt of engine[J]. China Mechanical Engineering, 2006, 17(8): 845-848. (in Chinese)
[2] PICAS J A, PUNSET M, BAILE M T, et al. Tribological evaluation of HVOF thermal-spray coatings as a hard chrome replacement[J]. Surface and Interface Analysis, 2011, 43(10): 1346-1353.
[3] 张春波. 超硬涂层零件滚动接触疲劳失效分析与试验研究[D]. 秦皇岛: 燕山大学, 2009. ZHANG C B. The study of rolling contact fatigue failure and tests on super hard coating parts[D]. Qinhuangdao: Yanshan University, 2009. (in Chinese)
[4] GONG T M, YAO P P, ZUO X T, et al. Influence of WC carbide particle size on the microstructure and abrasive wear behavior of WC-10Co-4Cr coatings for aircraft landing gear[J]. Wear, 2016, 362-363: 135-145.
[5] 韩赞东, 李永杰, 陈以方. 陶瓷涂层结合质量的超声斜入射检测[J]. 清华大学学报(自然科学版), 2017, 57(5): 454-458. HAN Z D, LI Y J, CHEN Y F. Oblique-incidence ultrasonic testing for the adhesion quality of ceramic coatings[J]. Journal of Tsinghua University (Science and Technology), 2017, 57(5): 454-458. (in Chinese)
[6] 刘明, 陈书赢, 马国政, 等. 热喷涂涂层/基体异质界面结合强度优化理论与方法现状研究[J]. 机械工程学报, 2020, 56(10): 64-77. LIU M, CHEN S Y, MA G Z, et al. Research status of optimization theory and method of thermal spraying coating/substrate heterogeneous interface bonding[J]. Journal of Mechanical Engineering, 2020, 56(10): 64-77. (in Chinese)
[7] YUAN J H, MA C W, YANG S L, et al. Improving the wear resistance of HVOF sprayed WC-Co coatings by adding submicron-sized WC particles at the splats' interfaces[J]. Surface and Coatings Technology, 2016, 285: 17-23.
[8] WATANABE M, OWADA A, KURODA S, et al. Effect of WC size on interface fracture toughness of WC-Co HVOF sprayed coatings[J]. Surface and Coatings Technology, 2006, 201(3-4): 619-627.
[9] 柳建, 孟凡军, 殷凤良, 等. 热喷涂涂层与基体结合界面研究进展[J]. 材料工程, 2017, 45(1): 101-110. LIU J, MENG F J, YIN F L, et al. Progress in research on bonding interface between thermal spraying coating and substrate[J]. Journal of Materials Engineering, 2017, 45(1): 101-110. (in Chinese)
[10] 栗卓新, 方建筠, 魏琪, 等. 国内外热喷涂涂层形成机理的研究进展[J]. 中国机械工程, 2006, 17(11): 1198-1203. LI Z X, FANG J J, WEI Q, et al. State-of-the-art of formation mechanism of coatings prepared by thermal spraying[J]. China Mechanical Engineering, 2006, 17(11): 1198-1203. (in Chinese)
[11] ZHANG F Y, DUAN C Z, SUN W, et al. Effects of cutting conditions on the microstructure and residual stress of white and dark layers in cutting hardened steel[J]. Journal of Materials Processing Technology, 2019, 266: 599-611.
[12] ZHANG W W, ZHUANG K J. Effect of cutting edge microgeometry on surface roughness and white layer in turning AISI 52100 steel[J]. Procedia CIRP, 2020, 87: 53-58.
[13] GHANI J A, CHOUDHURY I A, HASSAN H H. Application of Taguchi method in the optimization of end milling parameters[J]. Journal of Materials Processing Technology, 2004, 145(1): 84-92.
[14] CUI X B, ZHAO J, TIAN X H. Cutting forces, chip formation, and tool wear in high-speed face milling of AISI H13 steel with CBN tools[J]. International Journal of Advanced Manufacturing Technology, 2013, 64(9-12): 1737-1749.
[15] HERBERT C R J, AXINTE D A, HARDY M C, et al. Investigation into the characteristics of white layers produced in a nickel-based superalloy from drilling operations[J]. Procedia Engineering, 2011, 19: 138-143.
[16] LIU J F, GUO Y B, BUTLER T M, et al. Crystallography, compositions, and properties of white layer by wire electrical discharge machining of nitinol shape memory alloy[J]. Materials & Design, 2016, 109: 1-9.
[17] SARAF L. Kernel average misorientation confidence index correlation from FIB sliced Ni-Fe-Cr alloy surface[J]. Microscopy and Microanalysis, 2011, 17(S2): 424-425.
[18] WRIGHT S I, NOWELL M M. EBSD image quality mapping[J]. Microscopy and Microanalysis, 2006, 12(1): 72-84.
[19] 赵文明, 王俊, 翟长生, 等. 纳米复合涂层ZrO₂/0.05w (Al₂O₃)力学性能的Weibull分布特性[J]. 中国表面工程, 2005, 18(4): 13-17. ZHAO W M, WANG J, ZHAI C S, et al. The Weibull distribution of microhardness and microstructure of ZrO₂/0.05w (Al₂O₃) plasma sprayed coatings[J]. China Surface Engineering, 2005, 18(4): 13-17. (in Chinese)
[20] 毕恩兵, 孙宏飞, 王灿明, 等. 纳米陶瓷等离子喷涂层硬度的Weibull分布及与涂层组构的对应特性[J]. 材料保护, 2012, 45(5): 24-27. BI E B, SUN H F, WANG C M, et al. Weibull distribution of microhardness of plasma sprayed nanostructured ceramic coating and relation between phase composition and microhardness[J]. Journal of Materials Protection, 2012, 45(5): 24-27. (in Chinese)