[1] 陈猛,刘马林,唐亚平,等.颗粒包覆过程的数值模拟方法比较研究[J].中国粉体技术, 2018, 24(1):7-15. CHEN M, LIU M L, TANG Y P, et al. Comparative study of numerical simulation method for particle coating process[J]. China Powder Science and Technology, 2018, 24(1):7-15.(in Chinese)
[2] LIU M L, LIU R Z, LIU B, et al. Preparation of the coated nuclear fuel particle using the fluidized bed-chemical vapor deposition (FB-CVD) method[J]. Procedia Engineering, 2015, 102:1890-1895.
[3] SAWA K, UETA S. Research and development on HTGR fuel in the HTTR project[J]. Nuclear Engineering and Design, 2004, 233(1-3):163-172.
[4] PANNALA S, DAW C S, FINNEY C E A, et al. Simulating the dynamics of spouted-bed nuclear fuel coaters[J]. Chemical Vapor Deposition, 2007, 13(9):481-490.
[5] 刘荣正,刘马林,邵友林,等.流化床-化学气相沉积技术的应用及研究进展[J].化工进展, 2016, 35(5):1263-1272. LIU R Z, LIU M L, SHAO Y L, et al. Application and research progress of fluidized bed-chemical vapor deposition technology[J]. Chemical Industry and Engineering Progress, 2016, 35(5):1263-1272.(in Chinese)
[6] MANN U, RUBINOVITCH M, CROSBY E J. Characterization and analysis of continuous recycle systems[J]. AIChE Journal, 1979, 25(5):873-882.
[7] SHELUKAR S, HO J, ZEGA J, et al. Identification and characterization of factors controlling tablet coating uniformity in a Wurster coating process[J]. Powder Technology, 2000, 110(1-2):29-36.
[8] PANDEY P, KATAKDAUNDE M, TURTON R. Modeling weight variability in a pan coating process using Monte Carlo simulations[J]. AAPS PharmSciTech, 2006, 7(4):E2-E11.
[9] KUSHAARI K, PANDEY P, SONG Y X, et al. Monte Carlo simulations to determine coating uniformity in a Wurster fluidized bed coating process[J]. Powder Technology, 2006, 166(2):81-90.
[10] MARONGA S J, WNUKOWSKI P. Modelling of the three-domain fluidized-bed particulate coating process[J]. Chemical Engineering Science, 1997, 52(17):2915-2925.
[11] KUMAR R, FREIREICH B, WASSGREN C. DEM-compartment-population balance model for particle coating in a horizontal rotating drum[J]. Chemical Engineering Science, 2015, 125:144-157.
[12] LI J F, FREIREICH B, WSAAGREN C, et al. A general compartment-based population balance model for particle coating and layered granulation[J]. AIChE Journal, 2012, 58(5):1397-1408.
[13] TOSCHKOFF G, JUST S, FUNKE A, et al. Spray models for discrete element simulations of particle coating processes[J]. Chemical Engineering Science, 2013, 101:603-614.
[14] BÖRNER M, BVCK A, TSOTSAS E. DEM-CFD investigation of particle residence time distribution in top-spray fluidised bed granulation[J]. Chemical Engineering Science, 2017, 161:187-197.
[15] HILTON J E, YING D Y, CLEARY P W. Modelling spray coating using a combined CFD-DEM and spherical harmonic formulation[J]. Chemical Engineering Science, 2013, 99:141-160.
[16] NOROUZI H R. Simulation of pellet coating in Wurster coaters[J]. International Journal of Pharmaceutics, 2020, 590:119931.
[17] LIU M L, CHEN M, LI T J, et al. CFD-DEM-CVD multi-physical field coupling model for simulating particle coating process in spout bed[J]. Particuology, 2019, 42:67-78.
[18] CZOK G, YE M, KUIPERS J A M H, et al. Modeling of chemical vapor deposition in a fluidized bed reactor based on discrete particle simulation[J]. International Journal of Chemical Reactor Engineering, 2005, 3(1):A57.
[19] FRIES L, ANTONYUK S, HEINRICH S, et al. Collision dynamics in fluidised bed granulators:A DEM-CFD study[J]. Chemical Engineering Science, 2013, 86:108-123.
[20] LIU M L, WEN Y Y, LIU R Z, et al. Investigation of fluidization behavior of high density particle in spouted bed using CFD-DEM coupling method[J]. Powder Technology, 2015, 280:72-82.
[21] CHEN M, LIU M L, TANG Y P. Comparison of Euler-Euler and Euler-Lagrange approaches for simulating gas-solid flows in a multiple-spouted bed[J]. International Journal of Chemical Reactor Engineering, 2019, 17(7):20180254.
[22] CHEN M, LIU M L, LI T J, et al. A novel mixing index and its application in particle mixing behavior study in multiple-spouted bed[J]. Powder Technology, 2018, 339:167-181.
[23] GRYCZKA O, HEINRICH S, DEEN N G, et al. Characterization and CFD-modeling of the hydrodynamics of a prismatic spouted bed apparatus[J]. Chemical Engineering Science, 2009, 64(14):3352-3375.
[24] XU B H, YU A B. Numerical simulation of the gas-solid flow in a fluidized bed by combining discrete particle method with computational fluid dynamics[J]. Chemical Engineering Science, 1997, 52(16):2785-2809.
[25] CHU K W, YU A B. Numerical simulation of complex particle-fluid flows[J]. Powder Technology, 2008, 179(3):104-114.
[26] LI J, MASON D J. A computational investigation of transient heat transfer in pneumatic transport of granular particles[J]. Powder Technology, 2000, 112(3):273-282.
[27] CHAUDHURI B, MUZZIO F J, TOMASSONE M S. Modeling of heat transfer in granular flow in rotating vessels[J]. Chemical Engineering Science, 2006, 61(19):6348-6360.
[28] KHAN R U, BAJOHR S, GRAF F, et al. Modeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor[J]. Molecules, 2007, 12(3):290-296.
[29] KIEFER J H, VON DRASEK W A. The mechanism of the homogeneous pyrolysis of acetylene[J]. International Journal of Chemical Kinetics, 1990, 22(7):747-786.
[30] BUCHHOLZ D, KHAN R U, BAJOHR S, et al. Computational fluid dynamics modeling of acetylene pyrolysis for vacuum carburizing of steel[J]. Industrial&Engineering Chemistry Research, 2010, 49(3):1130-1137.
[31] ZHANG W G, HVTTINGER K J. CVD of SiC from Methyltrichlorosilane. Part II:Composition of the gas phase and the deposit[J]. Chemical Vapor Deposition, 2001, 7(4):173-181.
[32] 臧卫国.一个新的黏附系数公式及其应用[C]//中国宇航学会结构强度与环境工程专委会航天空间环境工程信息网学术讨论会.北京,中国:中国宇航学会, 2005:181-186. ZANG W G. A new formula of adhesion coefficient and its application[C]//Academic Symposium on the Aerospace Environmental Engineering Information Network of the Special Committee of Structural Strength and Environmental Engineering of Chinese Astronautical Society. Beijing, China:CSA, 2005:181-186.(in Chinese)
[33] LI A J, DEUTSCHMANN O. Transient modeling of chemical vapor infiltration of methane using multi-step reaction and deposition models[J]. Chemical Engineering Science, 2007, 62(18-20):4976-4982.
[34] RAMKRISHNA D. Population balances:Theory and applications to particulate systems in engineering[M]. San Diego, California:Academic Press, 2000.
[35] KIM Y, KIM H U, SHIN Y, et al. Modeling of silicon nanoparticle formation in inductively coupled plasma using a modified collision frequency function[J]. Journal of Mechanical Science and Technology, 2014, 28(11):4693-4703.
[36] CHENG J C, YANG C, MAO Z S, et al. CFD modeling of nucleation, growth, aggregation, and breakage in continuous precipitation of barium sulfate in a stirred tank[J]. Industrial&Engineering Chemistry Research, 2009, 48(15):6992-7003.
[37] LUO H, SVENDSEN H F. Theoretical model for drop and bubble breakup in turbulent dispersions[J]. AIChE Journal, 1996, 42(5):1225-1233.
[38] FARNOUSH H, MOHANDESI J A, FATMEHSARI D H. Effect of particle size on the electrophoretic deposition of hydroxyapatite coatings:A kinetic study based on a statistical analysis[J]. International Journal of Applied Ceramic Technology, 2013, 10(1):87-96.
[39] LIU M L, LIU B, SHAO Y L. The study on pyrolytic carbon powder in the coating process of fuel particle for high-temperature gas-cooled reactor[C]//18th International Conference on Nuclear Engineering. Xi'an, China:ASME, 2010:545-549.
