[1] ZHAO Y, WANG G Y, HUANG B, et al. Optimization design of tandem pump based on surrogate method[J]. Journal of Harbin Engineering University, 2016, 37(3): 438-447, 454. (in Chinese) 赵宇, 王国玉, 黄彪, 等. 基于代理模型方法的串列泵优化设计[J]. 哈尔滨工程大学学报, 2016, 37(3): 438-447, 454.
[2] LUO X W, YE W X, SONG X Y, et al. Future fluid machinery supporting "double-carbon" targets[J]. Journal of Tsinghua University (Science and Technology), 2022, 62(4): 678-692. (in Chinese) 罗先武, 叶维祥, 宋雪漪, 等. 支撑"双碳"目标的未来流体机械技术[J]. 清华大学学报(自然科学版), 2022, 62(4): 678-692.
[3] YAO Z F, WANG F J, YANG M, et al. Effects of impeller type on pressure fluctuations in double-suction centrifugal pump[J]. Journal of Mechanical Engineering, 2011, 47(12): 133-137, 143. (in Chinese) 姚志峰, 王福军, 杨敏, 等. 叶轮形式对双吸离心泵压力脉动特性影响试验研究[J]. 机械工程学报, 2011, 47(12): 133-137, 143.
[4] XUE C, ZHU B S, LIU X B, et al. Orthogonal optimization design of centrifugal pump based on blade load distribution[J]. Journal of Engineering Thermophysics, 2019, 40(5): 1065-1071. (in Chinese) 薛城, 祝宝山, 刘小兵, 等. 基于叶片载荷分布的离心泵正交优化设计[J]. 工程热物理学报, 2019, 40(5): 1065-1071.
[5] ZHANG F, YUAN S Q, WEI X Y, et al. Study on flow loss characteristics of side channel pump based on entropy production[J]. Journal of Mechanical Engineering, 2018, 54(22): 137-144. (in Chinese) 张帆, 袁寿其, 魏雪园, 等. 基于熵产的侧流道泵流动损失特性研究[J]. 机械工程学报, 2018, 54(22): 137-144.
[6] CAO S L, LIANG L, ZHU B S, et al. Design method for impeller of high specific speed mixed-flow pump[J]. Journal of Jiangsu University (Natural Science Edition), 2005, 26(3): 185-188. (in Chinese) 曹树良, 梁莉, 祝宝山, 等. 高比转速混流泵叶轮设计方法[J]. 江苏大学学报(自然科学版), 2005, 26(3): 185-188.
[7] KIM S, LEE K Y, KIM J H, et al. High performance hydraulic design techniques of mixed-flow pump impeller and diffuser[J]. Journal of Mechanical Science and Technology, 2015, 29(1): 227-240.
[8] KIM S, JEONG U B, LEE K Y, et al. Multi-objective optimization for mixed-flow pump with blade angle of impeller exit and diffuser inlet[J]. Journal of Mechanical Science and Technology, 2017, 31(11): 5099-5106.
[9] WU D Z, WANG L Q, BAO Z R. Numerical simulation of flow in open-type mixed flow pump and options of the discharge structures[J]. Journal of Mechanical Engineering, 2008, 44(8): 90-96. (in Chinese) 吴大转, 王乐勤, 包志仁. 开敞式混流泵内流的数值模拟与出水机构选择[J]. 机械工程学报, 2008, 44(8): 90-96.
[10] SHI W D, ZHANG Y, XIAO Y, et al. Research status of pump hydraulic design methods[J]. Journal of Nantong University (Natural Science Edition), 2019, 18(4): 1-7. (in Chinese) 施卫东, 张悦, 肖宇, 等. 泵水力设计方法的研究现状[J]. 南通大学学报(自然科学版), 2019, 18(4): 1-7.
[11] ZHAO W Y, WANG L, ZHAO S, et al. CFD-based impeller design method of medium-high specific speed centrifugal pump[J]. Journal of Lanzhou University of Technology, 2013, 39(2): 35-38. (in Chinese) 赵万勇, 王磊, 赵爽, 等. 基于CFD的中高比转速离心泵叶轮的设计方法[J]. 兰州理工大学学报, 2013, 39(2): 35-38.
[12] ZHANG Y X, CHEN L, ZHOU X, et al. Hydraulic design and BVF diagnosis of high efficiency centrifugal pump[J]. Journal of Drainage and Irrigation Machinery Engineering, 2013, 31(6): 479-483, 489. (in Chinese) 张永学, 陈龙, 周鑫, 等. 高效率离心泵水力设计及BVF诊断[J]. 排灌机械工程学报, 2013, 31(6): 479-483, 489.
[13] JIN S B, WANG Y S, DING J M, et al. Three-dimensional design and numerical experiment of mixed-flow waterjet with CFD[J]. Journal of Harbin Engineering University, 2012, 33(10): 1223-1227. (in Chinese) 靳栓宝, 王永生, 丁江明, 等. 混流式喷水推进泵三元设计及数值试验[J]. 哈尔滨工程大学学报, 2012, 33(10): 1223- 1227.
[14] ZANGENEH M. A compressible three-dimensional design method for radial and mixed flow turbomachinery blades[J]. International Journal for Numerical Methods in Fluids, 1991, 13(5): 599-624.
[15] ZANGENEH M, GOTO A, HARADA H. On the design criteria for suppression of secondary flows in centrifugal and mixed flow impellers[J]. Journal of Turbomachinery, 1998, 120(4): 723-735.
[16] GOTO A, NOHMI M, SAKURAI T, et al. Hydrodynamic design system for pumps based on 3-D CAD, CFD, and inverse design method[J]. Journal of Fluids Engineering, 2002, 124(2): 329-335.
[17] YANG W, WANG F J, WANG H. Three-dimensional inverse design and fluid flow numerical simulation for centrifugal impeller[J]. Journal of Drainage and Irrigation Machinery Engineering, 2012, 30(6): 632-635. (in Chinese) 杨魏, 王福军, 王宏. 离心式叶轮三维反问题设计和数值计算[J]. 排灌机械工程学报, 2012, 30(6): 632-635.
[18] TAN C S, HAWTHORNE W R, MCCUNE J E, et al. Theory of blade design for large deflections: Part Ⅱ—Annular cascades[J]. Journal of Engineering for Gas Turbines and Power, 1984, 106(2): 354-365.
[19] LUO X Q, CHEN N X, LIN R C. Inverse calculation of a full three dimensional rotational flow for mixed flow runner[J]. Acta Mechanica Sinica, 1995, 27(S1): 30-36. (in Chinese) 罗兴琦, 陈乃祥, 林汝长. 混流式转轮内有旋流动的全三元反问题计算[J]. 力学学报, 1995, 27(S1): 30-36.
[20] TAN L, CAO S L, WANG Y M, et al. Direct and inverse iterative design method for centrifugal pump impellers[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2012, 226(6): 764-775.
[21] BING H, CAO S L, TAN L, et al. Parameterization of velocity moment distribution and its effects on performance of mixed-flow pump[J]. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(13): 100-105. (in Chinese) 邴浩, 曹树良, 谭磊, 等. 速度矩分布规律的参数化描述及对混流泵性能的影响[J]. 农业工程学报, 2012, 28(13): 100-105.
[22] BING H, ZHANG Q Z, CAO S L, et al. Iteration design of direct and inverse problems and flow analysis of mixed-flow pump impellers[J]. Journal of Tsinghua University (Science and Technology), 2013, 53(2): 179-183. (in Chinese) 邴浩, 张勤昭, 曹树良, 等. 混流泵叶轮的正反问题迭代法设计及流动分析[J]. 清华大学学报(自然科学版), 2013, 53(2): 179-183.
[23] BING H, CAO S L, TAN L, et al. Effects of diffuser vane on mixed-flow pumps performance[J]. Journal of Drainage and Irrigation Machinery Engineering, 2012, 30(2): 125-130. (in Chinese) 邴浩, 曹树良, 谭磊, 等. 混流泵导叶对其性能的影响[J]. 排灌机械工程学报, 2012, 30(2): 125-130.
